CROSS POINT SWITCH Multiplexers & Switches 562

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
ADG799ACCPZ-500RL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED	1	3	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT		3.3 V	1 mm	4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e3	BREAK-BEFORE-MAKE			266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
AD8108AST	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY	1	8	BIPOLAR	GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm	12 mm	Not Qualified		93 dB	4.5 V		-4.5 V	e0			240	180 ns				12 mm
ADV3224ACPZ-R7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	72	HVQCCN	SQUARE	YES	UNSPECIFIED	1	16		NO LEAD	-5.5 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel		QUAD	S-XQCC-N72			5.5 V	1 mm	10 mm	Not Qualified		80 dB	4.5 V		-4.5 V									10 mm
ADG2108BCPZ-R2	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	10	CMOS	NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT		13.2 V	1 mm	5 mm	Not Qualified		69 dB	10.8 V			e3	MAKE-BEFORE-BREAK			185 ns	50 ohm	250 ns	4.5 ohm	5 mm
AD8113JSTZ	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY	1	16		GULL WING	-12.6 V	-12 V	12 V	+-5/+-12	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	12.6 V	1.6 mm	14 mm	Not Qualified		83 dB	4.5 V	CAN ALSO BE OPERATED AT +/-5 VOLT SUPPLY FOR VIDEO APPLICATIONS	-4.5 V	e3		30	260					14 mm
AD8117ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY	1	32	BIPOLAR	BALL		-2.5 V	2.5 V	+-2.5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm	31 mm	Not Qualified		90 dB		CAN ALSO OPERATE WITH 5V SINGLE SUPPLY		e1			260					31 mm
AD8113JST	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY	1	16		GULL WING	-12.6 V	-12 V	12 V	+-5/+-12	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	12.6 V	1.6 mm	14 mm	Not Qualified		83 dB	4.5 V	CAN ALSO BE OPERATED AT +/-5 VOLT SUPPLY FOR VIDEO APPLICATIONS	-4.5 V	e0			240					14 mm
ADG799GCCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED	1	3	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT		3.3 V	1 mm	4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e3	BREAK-BEFORE-MAKE			266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
AD8115ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY	1	16		GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	5.5 V	1.6 mm	14 mm	Not Qualified		90 dB	4.5 V		-4.5 V	e3		30	260					14 mm
AD8115AST	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY	1	16		GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	5.5 V	1.6 mm	14 mm	Not Qualified		90 dB	4.5 V		-4.5 V	e0			240					14 mm
ADG2108BCPZ-HS-RL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	10	CMOS	NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	13.2 V	1 mm	5 mm	Not Qualified		69 dB	10.8 V			e3	MAKE-BEFORE-BREAK			185 ns	50 ohm	250 ns	4.5 ohm	5 mm
ADG2108BCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	10	CMOS	NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	13.2 V	1 mm	5 mm	Not Qualified		69 dB	10.8 V			e3	MAKE-BEFORE-BREAK			185 ns	50 ohm	250 ns	4.5 ohm	5 mm
AD8113	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY	1			GULL WING				+-5/+-12	FLATPACK	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQFP-G100	SEPARATE OUTPUT					Not Qualified						e0
ADG2108YCPZ-HS-RL7	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	10	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified		64 dB	4.5 V		-4.5 V	e3	MAKE-BEFORE-BREAK			200 ns	75 ohm	250 ns	4.5 ohm	5 mm
ADG2188BCPZ-R2	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	8	CMOS	NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	SEPARATE OUTPUT		13.2 V	1 mm	5 mm	Not Qualified		69 dB	10.8 V	CAN ALSO OPERATES AT +/-12 V SUPPLY		e3	MAKE-BEFORE-BREAK			185 ns	50 ohm	250 ns	4.5 ohm	5 mm
AD8107ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY	1	16		GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm	12 mm	Not Qualified	NO/NC	93 dB	4.5 V		-4.5 V	e3	MAKE-BEFORE-BREAK	30	260	60 ns				12 mm
AD8175ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	676	BGA	SQUARE	YES	PLASTIC/EPOXY	1	16		BALL		-2.5 V	2.5 V	+-2.5	GRID ARRAY	BGA676,26X26,40	Multiplexer or Switches	1 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B676	SEPARATE OUTPUT	3		2.45 mm	27 mm	Not Qualified		94 dB		ALSO OPERATES ON 5V SINGLE SUPPLY		e1			260					27 mm
ADG2188YCPZ-R2	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	8	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	SEPARATE OUTPUT		5.5 V	1 mm	5 mm	Not Qualified		64 dB	4.5 V	CAN ALSO OPERATES AT +/-12 V SUPPLY	-4.5 V	e3	MAKE-BEFORE-BREAK			200 ns	75 ohm	250 ns	4.5 ohm	5 mm
AD8176ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	676	BGA	SQUARE	YES	PLASTIC/EPOXY	1	16		BALL		-2.5 V	2.5 V	2.5	GRID ARRAY	BGA676,26X26,40	Multiplexer or Switches	1 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B676		3		2.43 mm	27 mm	Not Qualified		90 dB		ALSO OPERATE WITH 5V SINGLE SUPPLY		e1			260					27 mm
ADG2108YCPZ-R2	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	10	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT		5.5 V	1 mm	5 mm	Not Qualified		64 dB	4.5 V		-4.5 V	e3	MAKE-BEFORE-BREAK			200 ns	75 ohm	250 ns	4.5 ohm	5 mm
ADG2128WBCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	12	CMOS	NO LEAD	-5.5 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32		3	5.5 V	.8 mm	5 mm				4.5 V	ALSO HAS 12V SINGLE SUPPLY	-4.5 V	e3		30	260		75 ohm		4.5 ohm	5 mm
AD8178ABPZ	Analog Devices	CROSS POINT SWITCH																					TIN SILVER COPPER				3										e1			260
ADG799ACCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED	1	3	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT		3.3 V	1 mm	4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e3	BREAK-BEFORE-MAKE			266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
ADV3226ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HVQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	1	16		NO LEAD	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC100,.47SQ,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N100	SEPARATE OUTPUT	3	5.5 V	.9 mm	12 mm	Not Qualified		80 dB	4.5 V		-4.5 V	e3								12 mm
ADV3227ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HVQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	1	16		NO LEAD	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC100,.47SQ,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N100	SEPARATE OUTPUT	3	5.5 V	.9 mm	12 mm	Not Qualified		75 dB	4.5 V		-4.5 V	e3			260					12 mm
ADV3224ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	72	HVQCCN	SQUARE	YES	UNSPECIFIED	1	16		NO LEAD	-5.5 V	-5 V	5 V	5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC72,.39SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N72	SEPARATE OUTPUT	3	5.5 V	1 mm	10 mm	Not Qualified		80 dB	4.5 V		-4.5 V	e3		30	260	20 ns				10 mm
ADG799GBCPZ-500RL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED	1	3	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT	3	3.3 V	1 mm	4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e3	BREAK-BEFORE-MAKE		260	266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
AD8110AST	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY	1	16	BIPOLAR	GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm	12 mm	Not Qualified		93 dB	4.5 V		-4.5 V	e0			240					12 mm
ADG799GBCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED	1	3	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT	3	3.3 V	1 mm	4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e3	BREAK-BEFORE-MAKE		260	266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
AD8156ABCZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	49	BGA	SQUARE	YES	PLASTIC/EPOXY	1	4		BALL			3.3 V		GRID ARRAY			1 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B49		3	3.6 V	1.85 mm	8 mm	Not Qualified			3 V			e1			260					8 mm
AD8152JBP	Analog Devices	CROSS POINT SWITCH	OTHER	256	LBGA	SQUARE	YES	PLASTIC/EPOXY	1	34		BALL			2.5 V		GRID ARRAY, LOW PROFILE			1.27 mm	85 Cel	0 Cel	TIN LEAD	BOTTOM	S-PBGA-B256		3	3.63 V	1.7 mm	27 mm	Not Qualified			2.25 V			e0			225		57 ohm			27 mm
ADG2128YCPZ-HS-RL7	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	12	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified		64 dB	4.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY	-4.5 V	e3	MAKE-BEFORE-BREAK			200 ns	75 ohm	250 ns	4.5 ohm	5 mm
MAX4570CWI+	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2	4	CMOS	GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	SEPARATE OUTPUT	1	5.25 V	2.65 mm	7.5 mm	Not Qualified		63 dB	2.7 V	VIDEO APPLICATION, ALSO OPERATES WITH 2.7 TO 5.5 SINGLE SUPPLY	-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	900 ns	80 ohm	500 ns	5 ohm	17.9 mm
MAX9393EHJ+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	TFQFP	SQUARE	YES	PLASTIC/EPOXY	2	2	BIPOLAR	GULL WING			3.3 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	SEPARATE OUTPUT	1	3.6 V	1.2 mm	5 mm	Not Qualified			3 V			e3		30	260	.574 ns		.555 ns		5 mm
MAX9391EHJ+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	QFP	SQUARE	YES	PLASTIC/EPOXY	2		BIPOLAR	GULL WING			3.3 V	3.3	FLATPACK	TQFP32,.28SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G132	SEPARATE OUTPUT					Not Qualified						e3
MAX4550CAI+T	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	2	4	CMOS	GULL WING	-5.25 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	SEPARATE OUTPUT	1	5.25 V	1.99 mm	5.29 mm	Not Qualified		63 dB	2.7 V		0 V	e3	BREAK-BEFORE-MAKE	30	260	900 ns	80 ohm	500 ns	5 ohm	10.2 mm
MAX9391EHJ+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	TFQFP	SQUARE	YES	PLASTIC/EPOXY	2	2	BIPOLAR	GULL WING			3.3 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	SEPARATE OUTPUT	1	3.6 V	1.2 mm	5 mm	Not Qualified			3 V			e3		30	260	.565 ns		.53 ns		5 mm
AD8109ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY	1	8	BIPOLAR	GULL WING	-5.5 V	-5 V	5 V	5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm	12 mm	Not Qualified		98 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns				12 mm
AD75019JP	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1	16	BICMOS	J BEND		-12 V	12 V	5,+-12	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J44		3		4.57 mm	16.5862 mm	Not Qualified		92 dB				e0			225		300 ohm		20 ohm	16.5862 mm
ADG799ABCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	VQCCN	SQUARE	YES	UNSPECIFIED	1	3	CMOS	NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	SEPARATE OUTPUT	3	3.3 V	1 mm	4 mm	Not Qualified		60 dB	2.7 V	ALSO OPERATE AT 5V SUPPLY		e3	BREAK-BEFORE-MAKE		260	266 ns	5.5 ohm	260 ns	1.85 ohm	4 mm
ADV3228ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	72	HVQCCN	SQUARE	YES	UNSPECIFIED	1	8		NO LEAD	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC72,.39SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N72	SEPARATE OUTPUT	3	5.5 V	1 mm	10 mm	Not Qualified		80 dB	4.5 V		-4.5 V	e3			260					10 mm
ADV3203ASWZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	176	HLFQFP	SQUARE	YES	PLASTIC/EPOXY	1	32		GULL WING	-3.63 V	-3.3 V	3.3 V	3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP176,1.0SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G176	SEPARATE OUTPUT	3	3.63 V	1.6 mm	24 mm	Not Qualified		80 dB	2.97 V		-2.97 V	e3			260					24 mm
ADG2128YCPZ-REEL	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	12	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified		64 dB	4.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY	-4.5 V	e3	MAKE-BEFORE-BREAK			220 ns	95 ohm	260 ns	4.5 ohm	5 mm
ADG2108YCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED	1	10	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified		64 dB	4.5 V		-4.5 V	e3	MAKE-BEFORE-BREAK			200 ns	75 ohm	250 ns	4.5 ohm	5 mm
AD8112JSTZ	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY	1		BIPOLAR	GULL WING		-12 V	12 V	+-12	FLATPACK	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3				Not Qualified						e3		30	260
AD8177ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	676	BGA	SQUARE	YES	PLASTIC/EPOXY	1	16		BALL		-2.5 V	2.5 V		GRID ARRAY			1 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B676		3		2.43 mm	27 mm	Not Qualified		94 dB		ALSO OPERATE WITH 5V SINGLE SUPPLY		e1			260					27 mm
AD8118ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY	1	32	BIPOLAR	BALL		-2.5 V	2.5 V	+-2.5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm	31 mm	Not Qualified		90 dB		CAN ALSO OPERATE WITH 5V SINGLE SUPPLY		e1			260					31 mm
AD8104ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY	1	32		BALL		-2.5 V	2.5 V	+-2.5/5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm	31 mm	Not Qualified		90 dB				e1			260					31 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.