CROSS POINT SWITCH Multiplexers & Switches 562

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
DS90CP02SPX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	QCCN	SQUARE	YES	PLASTIC/EPOXY		1		CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC28,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N28	SEPARATE OUTPUT	3				Not Qualified						e3	BREAK-BEFORE-MAKE	30	260	150 ns
DS25CP152TSQX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		1					NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC16,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1				Not Qualified						e3	BREAK-BEFORE-MAKE	30	260	20000 ns
SN65LVCP404RGZR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	220 mA	1	1				NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	SEPARATE OUTPUT	3	3.465 V	1 mm	7 mm	Not Qualified		3.135 V				e4		30	260	6 ns				7 mm
DS25CP114TSQ	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	40	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1				NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel		QUAD	S-XQCC-N40			3.6 V	.8 mm	6 mm	Not Qualified		3 V												6 mm
TUSB1146RNQR	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	40	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	5				NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.17X.25,16		.4 mm	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	COMMON OUTPUT	1	3.6 V	.8 mm	4 mm			3 V				e4		30	260	500 ns	10 ohm	500 ns	2.5 ohm	6 mm
SN65LVDT125DBTR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G38	SEPARATE OUTPUT		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V						NOT SPECIFIED	NOT SPECIFIED	50 ns		6 ns		9.7 mm
DS90CP04TLQX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	4	CMOS			NO LEAD			2.5 V	2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N32	SEPARATE OUTPUT	3	2.625 V	.8 mm	6 mm	Not Qualified		2.375 V	4 X 4 ARRAY			e3	BREAK-BEFORE-MAKE	30	260	.16 ns		.16 ns		6 mm
SN65LVCP23D	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.087 mA	1	2	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V				e4		30	260	2.5 ns		2.5 ns		9.9 mm
DS25CP114TSQX	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	40	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1				NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel		QUAD	S-XQCC-N40			3.6 V	.8 mm	6 mm	Not Qualified		3 V												6 mm
TUSB1146IRNQT	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	40	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	5				NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.17X.25,16		.4 mm	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	COMMON OUTPUT	1	3.6 V	.8 mm	4 mm			3 V				e4		30	260	500 ns	10 ohm	500 ns	2.5 ohm	6 mm
SN65LVDS125DBTR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G38	SEPARATE OUTPUT		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V						NOT SPECIFIED	NOT SPECIFIED	50 ns		6 ns		9.7 mm
DS90CP02SPX	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	2	CMOS			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-N28		3	3.6 V	.6 mm	5 mm	Not Qualified		3 V				e0				150 ns		12 ns		5 mm
DS90CP04TLQ	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	300 mA	1	4	CMOS			NO LEAD			2.5 V	2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-N32	SEPARATE OUTPUT	3	2.625 V	.8 mm	6 mm	Not Qualified		2.375 V	4 X 4 ARRAY			e0	BREAK-BEFORE-MAKE		260	.16 ns		.16 ns		6 mm
DS25CP114TSQE/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	40	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	190 mA	1					NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N40	SEPARATE OUTPUT	3		.75 mm	6 mm	Not Qualified						e3	MAKE-BEFORE-BREAK	30	260	20000 ns				6 mm
TS5USBC412IYFFT	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.022 mA	1	2			1200 kHz	BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12		1	5.5 V	.625 mm	1.198 mm		25 dB	2.3 V				e1		30	260	250000 ns	9 ohm	1000 ns	.075 ohm	1.598 mm
DS10CP152TMAX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	70 mA	1					GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.58 mm	3.91 mm	Not Qualified				0 V		e3	BREAK-BEFORE-MAKE	30	260	20000 ns				9.9 mm	1 V
SN65LVCP202RGER	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.115 mA	1	2				GULL WING			3.3 V	3.3	SMALL OUTLINE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	SEPARATE OUTPUT	3	3.465 V	1 mm	4 mm	Not Qualified		3.135 V				e4		30	260					4 mm
SCAN90CP02SP/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	60 mA	1	2	CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N28	SEPARATE OUTPUT	3	3.6 V	.6 mm	5 mm	Not Qualified		3 V	CONFIGURABLE AS 2:1 MUX OR 1:2 SPLITTER			e3	BREAK-BEFORE-MAKE	30	260	150 ns		12 ns		5 mm
DS25CP152TSQ/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	77 mA	1	2				NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	3.6 V	.8 mm	4 mm	Not Qualified		3 V				e3	BREAK-BEFORE-MAKE	30	260	20000 ns		12 ns		4 mm
SCAN90CP02SP	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	2	CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		QUAD	S-PQCC-N28	SEPARATE OUTPUT		3.6 V	.6 mm	5 mm	Not Qualified		3 V	CONFIGURABLE AS 2:1 MUX OR 1:2 SPLITTER				BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	150 ns		12 ns		5 mm
DS25CP152QSQX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	77 mA	1			AEC-Q100		NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1	3.6 V	.8 mm	4 mm	Not Qualified		3 V				e3	BREAK-BEFORE-MAKE	30	260	20000 ns				4 mm
DS90CP22MTX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	125 mA	1	2	BIPOLAR			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		3 V				e3	MAKE-BEFORE-BREAK	30	260	55 ns		4.5 ns		5 mm
DS10CP152QMAX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	70 mA	1					GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.58 mm	3.91 mm	Not Qualified		3 V		0 V		e3	BREAK-BEFORE-MAKE	30	260	20000 ns				9.9 mm	1 V
SN65LVCP204RGZ	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	4				GULL WING			3.3 V		SMALL OUTLINE			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48			3.465 V	1 mm	7 mm	Not Qualified		3.135 V				e4								7 mm
DS10CP154ATSQ/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	40	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	140 mA	1					NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N40	SEPARATE OUTPUT	3		.75 mm	6 mm	Not Qualified				0 V		e3	MAKE-BEFORE-BREAK	30	260	20000 ns				6 mm	1 V
DS25CP152QSQ	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4				NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16		1	3.6 V	.8 mm	4 mm	Not Qualified		3 V				e0				20000 ns		12 ns	100 ohm	4 mm
DS90CP22MT	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	125 mA	1	2	BIPOLAR			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		3 V				e0	MAKE-BEFORE-BREAK		260	55 ns		4.5 ns		5 mm
XTS5USBC412YFFT	Texas Instruments	CROSS POINT SWITCH
DS90CP22MT/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	125 mA	1	2	BIPOLAR			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		3 V				e3	MAKE-BEFORE-BREAK	30	260	55 ns		4.5 ns		5 mm
SN55LVCP22W/EM	Texas Instruments	CROSS POINT SWITCH	MILITARY	16	DFP	RECTANGULAR	YES	CERAMIC, GLASS-SEALED	.087 mA	2					FLAT			3.3 V	3.3	FLATPACK	FL16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDFP-F16	SEPARATE OUTPUT		3.6 V	2.03 mm	6.73 mm	Not Qualified		3 V				e0								10.3 mm
LMH6580VS/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY	60 mA	1	4			500 kHz	GULL WING				+-3.3/+-5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G48	SEPARATE OUTPUT	3		1.2 mm	7 mm	Not Qualified						e3	BREAK-BEFORE-MAKE	30	260					7 mm
DS90CP02SP	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	2	CMOS			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-N28		3	3.6 V	.6 mm	5 mm	Not Qualified		3 V				e0				150 ns		12 ns		5 mm
SN65LVCP204RGZR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.115 mA	1	4				GULL WING			3.3 V	3.3	SMALL OUTLINE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	SEPARATE OUTPUT	3	3.465 V	1 mm	7 mm	Not Qualified		3.135 V				e4		30	260					7 mm
DS90CP02SP/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	60 mA	1		CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N28	SEPARATE OUTPUT	3		.6 mm	5 mm	Not Qualified						e3	BREAK-BEFORE-MAKE	30	260	150 ns				5 mm
SN65LVCP404RGZTG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1				NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	SEPARATE OUTPUT	3	3.465 V	1 mm	7 mm	Not Qualified		3.135 V				e4		30	260					7 mm
SN65LVDS250DBTRG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.145 mA	1	4	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G38	SEPARATE OUTPUT	2	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V				e4		NOT SPECIFIED	260	300 ns		6 ns		9.7 mm
DS90CP22MTX	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BIPOLAR			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		3 V				e0			260	55 ns		4.5 ns		5 mm
LMH6583YA	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	64	HTFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16				GULL WING	-5.5 V	-5 V	5 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel		QUAD	S-PQFP-G64		3	5.5 V	1.2 mm	10 mm	Not Qualified	65 dB	3 V			-3 V									10 mm
SN65LVDT125DBT	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G38	SEPARATE OUTPUT		3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V						NOT SPECIFIED	NOT SPECIFIED	50 ns		6 ns		9.7 mm
XTS5USBC410YFFR	Texas Instruments	CROSS POINT SWITCH
SN65LVCP22PWG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	87 mA	1	2	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V	CONFIGURABLE AS 2:1 MUX, 1:2 DEMUX, REPEATER OR 1:2 SIGNAL SPLITTER			e4		30	260	4 ns		4 ns		5 mm
DS25CP102QSQX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	90 mA	1			AEC-Q100		NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1		.75 mm	4 mm	Not Qualified						e3	BREAK-BEFORE-MAKE	30	260	20000 ns				4 mm
DS90CP22MX-8/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	125 mA	2		CMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.58 mm	3.91 mm	Not Qualified						e3	MAKE-BEFORE-BREAK	30	260					9.9 mm
SN65LVDS125ADBTG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	145 mA	1	4	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	SEPARATE OUTPUT	2	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V				e4		30	260	300 ns		6 ns		9.7 mm
SN65LVCP23PWG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	65 mA	1	2	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V				e4		30	260	2.5 ns		2.5 ns		5 mm
SN65LVDT125ADBT	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.145 mA	1	4	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	SEPARATE OUTPUT	2	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V				e4		30	260	300 ns		6 ns		9.7 mm
SCAN90CP02VY/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	32	LQFP	SQUARE	YES	PLASTIC/EPOXY	60 mA	1	2	CMOS			GULL WING			3.3 V	3.3	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Multiplexer or Switches	.8 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G32	SEPARATE OUTPUT	3	3.6 V	1.6 mm	7 mm	Not Qualified		3 V	CONFIGURABLE AS 2:1 MUX OR 1:2 SPLITTER			e3	BREAK-BEFORE-MAKE	30	260	150 ns		12 ns		7 mm
SN65LVCP402RGER	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	115 mA	1	2				NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	SEPARATE OUTPUT	3	3.465 V	1 mm	4 mm	Not Qualified		3.135 V				e4		30	260	.7 ns		.7 ns		4 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.