INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Total Dose (V)	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG726BCPZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	HVQCCN	SQUARE	YES		UNSPECIFIED	.02 mA	1	16	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N48		3	2.75 V	1 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERTES WITH 1.8V TO 5.5V SINGLE SUPPLY		-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	37 ns	5.5 ohm	26 ns	.3 ohm	7 mm
CD4016BCN	National Semiconductor	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO		PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE		-7.5 V	7.5 V	5/15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14	SEPARATE OUTPUT			5.08 mm		7.62 mm	Not Qualified	NO	50 dB					e0				35 ns	850 ohm	22 ns	10 ohm	19.18 mm
DG413DVZ	Renesas Electronics	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	20 V	1.2 mm		4.4 mm	Not Qualified		68 dB	5 V			-5 V	e3		30	260	175 ns	35 ohm	145 ns		5 mm
DG413DVZ-T	Renesas Electronics	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	20 V	1.2 mm		4.4 mm	Not Qualified		68 dB	5 V			-5 V	e3		30	260	175 ns	35 ohm	145 ns		5 mm
FSA3157P6X_NL	Fairchild Semiconductor	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.3 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		57 dB	1.65 V	2:1 MULTIPLEXER/DEMULTIPLEXER BUS SWITCH			e3	BREAK-BEFORE-MAKE			13 ns	30 ohm	7 ns	.5 ohm	2 mm
ISL84522IBZ-T	Renesas Electronics	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY		4	1	CMOS		GULL WING	-6 V	-5 V	5 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		3	6 V	1.75 mm		3.9 mm				2 V			-2 V	e3		30	260	100 ns	100 ohm	40 ns	1 ohm	9.9 mm
MAX4712EUE	Maxim Integrated	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.1 mm		4.4 mm	Not Qualified	NO	59 dB	2.7 V	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V		-2.7 V	e0	BREAK-BEFORE-MAKE		245	125 ns	25 ohm	80 ns	.2 ohm	5 mm
MAX4712EUE+	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.1 mm		4.4 mm	Not Qualified	NO	59 dB	2.7 V	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	125 ns	25 ohm	80 ns	.2 ohm	5 mm
OPA4872IDG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	11.7 mA	1	1	BIPOLAR		GULL WING	-6 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	COMMON OUTPUT	2	6 V	1.75 mm		3.9 mm	Not Qualified	NO	88 dB	3.5 V			-3.5 V	e4		NOT SPECIFIED	260					8.65 mm
TPS2530DBVR	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	1			GULL WING			5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	COMMON OUTPUT	2	5.5 V	1.45 mm		1.6 mm				2.7 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	2500000 ns	.116 ohm	1900000 ns		2.9 mm
TS12A44514PWR	Texas Instruments	SPST	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	<null>	PLASTIC/EPOXY	.0002 mA	4	4	CMOS	530 kHz	GULL WING			3 V	3/12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	12 V	1.2 mm		4.4 mm	Not Qualified	NO	94 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	175 ns	40 ohm	120 ns	3.5 ohm	5 mm
TS5A23166YZPR	Texas Instruments	SPST	INDUSTRIAL	8	VFBGA	RECTANGULAR	YES		UNSPECIFIED	.001 mA	2	2		150 kHz	BALL			1.8 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-XBGA-B8	SEPARATE OUTPUT	1	5.5 V	.5 mm		.9 mm	Not Qualified	NO/NC	62 dB	1.65 V		0 V		e1	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	18 ns	4 ohm	15.5 ns	.04 ohm	1.9 mm	5.5 V
TS5A3160DBVRG4	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified		64 dB	1.65 V				e4	MAKE-BEFORE-BREAK	30	260	27 ns	2.5 ohm	30 ns	.15 ohm	2.9 mm
TS5A3359DCUTG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.001 mA	1	1		75 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified	NO	64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	85 ns	3.5 ohm	16 ns	.15 ohm	2.3 mm	5.5 V
ADG202AKRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	1	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NO	80 dB					e3	BREAK-BEFORE-MAKE	30	260	300 ns	90 ohm	250 ns	5 ohm	9.9 mm
ADG506AKPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES		PLASTIC/EPOXY		1	16	CMOS		J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.51 mm		11.506 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3		40	260	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
ADG731BCP-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	HVQCCN	SQUARE	YES		UNSPECIFIED		1	32	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N48		3	2.75 V	1 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE		240	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm
ADG884BCBZ-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	10	VFBGA	RECTANGULAR	YES		UNSPECIFIED		2	1	CMOS		BALL			2.7 V	2/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA10,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B10	SEPARATE OUTPUT	1	5.5 V	.63 mm		1.5 mm	Not Qualified		60 dB	1.8 V				e1	BREAK-BEFORE-MAKE		260	56 ns	.5 ohm	19 ns	.02 ohm	2 mm
ADG884BCPZ-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	10	HVSON	SQUARE	YES		UNSPECIFIED		2	1	CMOS		NO LEAD			2.7 V	5	SMALL OUTLINE, VERY THIN PROFILE	SOLCC10,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-XDSO-N10	SEPARATE OUTPUT	3	5.5 V	.8 mm		3 mm	Not Qualified	NC	60 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	56 ns	.5 ohm	19 ns	.02 ohm	3 mm
ADG936BCPZ	Analog Devices	SPDT	INDUSTRIAL	20	HVQCCN	SQUARE	YES		UNSPECIFIED		2	1	CMOS		NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20		3	2.75 V	1 mm		4 mm	Not Qualified		36 dB	1.65 V				e3			260	14 ns		13 ns		4 mm
DG444DYZ-T	Renesas Electronics	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.005 mA	4	1	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	3	20 V	1.75 mm		3.9 mm		NO	60 dB		IT CAN ALSO OPERATE WITH 12V SINGLE SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	250 ns	200 ohm	140 ns		9.9 mm
DG452EY-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-5 V	5 V	+-5/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO		2.4 V	ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY			e3	BREAK-BEFORE-MAKE			256 ns	11 ohm	113 ns	.13 ohm	9.9 mm
FSA3230UMX	Onsemi	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	QCCN	RECTANGULAR	YES		PLASTIC/EPOXY		1				NO LEAD				2.5/4.5	CHIP CARRIER	LCC16,.07X.1,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260		6.5 ohm
FSUSB30L10X	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES		UNSPECIFIED		1	2			NO LEAD			3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	4.3 V	.55 mm		1.6 mm	Not Qualified		30 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	10 ohm	25 ns	.35 ohm	2.1 mm
LMS4684ITL/NOPB	Texas Instruments	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES		UNSPECIFIED	.000005 mA	2	2	CMOS		BALL			5 V	3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12	SEPARATE OUTPUT	1		.675 mm		1.8 mm	Not Qualified	NO/NC						e1	BREAK-BEFORE-MAKE	30	260		.8 ohm			2 mm
MAX4561EUT-T	Maxim Integrated	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	12 V	1.45 mm		1.625 mm	Not Qualified		75 dB	1.8 V	CAN ALSO OPERATE WITH 3V SUPPLY			e4	BREAK-BEFORE-MAKE		245	180 ns	70 ohm	100 ns	.5 ohm	2.9 mm
MAX4561EUT+T	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	3.6 V	1.45 mm		1.625 mm	Not Qualified			2.7 V	CAN ALSO OPERATE WITH 5V SUPPLY			e4	BREAK-BEFORE-MAKE	30	260	250 ns	120 ohm	100 ns		2.9 mm
MAX4634ETB-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	HVSON	SQUARE	YES		UNSPECIFIED	.001 mA	1	4	CMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-XDSO-N10		1	5.5 V	.8 mm	.05 A	3 mm	Not Qualified		80 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	22 ns	7 ohm	14 ns	.1 ohm	3 mm
MAX4634ETB+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	HVSON	SQUARE	YES		UNSPECIFIED	.001 mA	1	4	CMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-XDSO-N10		1	5.5 V	.8 mm	.05 A	3 mm	Not Qualified		80 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	22 ns	7 ohm	14 ns	.1 ohm	3 mm
MAX4781EUE-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.001 mA	1	8	CMOS		GULL WING			1.8 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	3.6 V	1.1 mm	.01 A	4.4 mm	Not Qualified		75 dB	1.6 V				e0	BREAK-BEFORE-MAKE	20	240	25 ns	1 ohm	15 ns	.3 ohm	5 mm
MAX4781EUE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.001 mA	1	8	CMOS		GULL WING			1.8 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	3.6 V	1.1 mm	.01 A	4.4 mm	Not Qualified		75 dB	1.6 V				e3	BREAK-BEFORE-MAKE	30	260	30 ns	2.5 ohm	20 ns	.3 ohm	5 mm
NB6L72MMNR2G	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES		UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.63 V	1 mm		3 mm	Not Qualified			2.375 V	ALSO OPERATES WITH 0V -3.63V SUPPLY					30	260	.48 ns		.48 ns		3 mm
TS5A3160DCKRG4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0005 mA	1	1		105 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	27 ns	3.5 ohm	30 ns	.15 ohm	2 mm	5.5 V
ADG411BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	4.57 mm		7.62 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE			175 ns	35 ohm	145 ns		19.43 mm
ADG426BRS-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.5 mA	1	16	BICMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28		1	16.5 V	2 mm	.02 A	5.3 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE	30	240	150 ns	80 ohm	150 ns	4 ohm	10.2 mm
ADG4612BRUZ	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		4	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-5/12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.35 A	4.4 mm	Not Qualified	NO	54 dB	3 V			-3 V	e3	MAKE-BEFORE-BREAK	30	260	149 ns	6.1 ohm	149 ns	.05 ohm	5 mm
DG441DY-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NC	60 dB					e3	BREAK-BEFORE-MAKE	30	260	250 ns	85 ohm	120 ns	4 ohm	9.9 mm
HEF4053BTT,118	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.6 mA	3	2	CMOS		GULL WING		0 V	15 V	5/15	SMALL OUTLINE	TSSOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16		1	15 V	1.75 mm	.01 A	3.9 mm	Not Qualified		50 dB	3 V				e4		30	260	140 ns	175 ohm	220 ns	5 ohm	9.9 mm
MAX14508EEVB+T	Analog Devices	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES		UNSPECIFIED		1	2	BICMOS		NO LEAD			3 V		CHIP CARRIER, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	R-XQCC-N10		1	5 V	.55 mm		1.4 mm			65 dB	2.7 V						30	260	60000 ns	5 ohm	5000 ns	.2 ohm	1.8 mm
MAX4564EUA-T	Maxim Integrated	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY		1	1	CMOS		GULL WING	-6 V	-5 V	5 V	+-5,3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	6 V	1.1 mm		3 mm	Not Qualified	NC	77 dB	2 V			-2 V	e0	BREAK-BEFORE-MAKE			60 ns	60 ohm	40 ns	.75 ohm	3 mm
MAX4564EUA+T	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY		1	1	CMOS		GULL WING	-6 V	-5 V	5 V	+-5,3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	6 V	1.1 mm		3 mm	Not Qualified	NC	77 dB	2 V			-2 V	e3	BREAK-BEFORE-MAKE	30	260	60 ns	60 ohm	40 ns	.75 ohm	3 mm
MAX4948ETG+T	Analog Devices	SPDT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		UNSPECIFIED		6	6	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N24	SEPARATE OUTPUT	1	5.5 V	.8 mm		4 mm	Not Qualified		70 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	800 ns	5.5 ohm	800 ns	.3 ohm	4 mm
NB6L72MNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES		UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.63 V	1 mm		3 mm	Not Qualified			2.375 V	NECL MODE: 0V GND WITH VEE = -2.375V TO -3.63V; IT ALSO WORKS ON 3.3 V SUPPLY					30	260	.16 ns		.16 ns		3 mm
PCA9646PW,118	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.1 mm		4.4 mm		NO		2.7 V						30	260					5 mm
TS3A24157RSER	Texas Instruments	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	.001 mA	2	2		50 kHz	NO LEAD			1.8 V	1.8/3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1	1.95 V	.6 mm	.1 A	1.5 mm	Not Qualified		73 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	80 ns	1 ohm	40 ns	.15 ohm	2 mm	3.6 V
TS3A24157RSERG4	Texas Instruments	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	.001 mA	2	2		50 kHz	NO LEAD			1.8 V	1.8/3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1	1.95 V	.6 mm	.1 A	1.5 mm	Not Qualified		73 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	80 ns	1 ohm	40 ns	.15 ohm	2 mm	3.6 V
TSU6111RSVR	Texas Instruments	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	VQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	.075 mA	1	2		920 kHz	NO LEAD			2.8 V	2.8,3/4.4	CHIP CARRIER, VERY THIN PROFILE	LCC16,.07X.1,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	SEPARATE OUTPUT	1	6.5 V	.55 mm		1.8 mm	Not Qualified		26 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260		15 ohm		.5 ohm	2.6 mm
ADG2128BCPZ-HS-RL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES		UNSPECIFIED		1	12	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm		5 mm	Not Qualified		66 dB	4.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-4.5 V	e3	MAKE-BEFORE-BREAK		260	200 ns	75 ohm	250 ns	4.5 ohm	5 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.