INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
DG403DY+T	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-20 V	-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	72 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	55 ohm	100 ns	.5 ohm	9.9 mm
FSA644UCX	Onsemi	SPDT	INDUSTRIAL	36	VFBGA	SQUARE	YES	PLASTIC/EPOXY		1	4			BALL			3.3 V	1.8/4	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA36,6X6,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	S-PBGA-B36	SEPARATE OUTPUT	1	4.5 V	.539 mm		2.36 mm	Not Qualified		18 dB	1.65 V				e1	BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	500 ns	12 ohm	90 ns	.8 ohm	2.36 mm
MAX4638ETE	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	8	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	+-2.5/3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16		1	2.75 V	.8 mm	.03 A	4 mm	Not Qualified			2.25 V			-2.25 V	e0	BREAK-BEFORE-MAKE			20 ns	3.5 ohm	20 ns	.2 ohm	4 mm
MAX4638ETE+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	8	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	+-2.5/3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16		1	2.75 V	.8 mm	.03 A	4 mm	Not Qualified			2.25 V			-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	20 ns	3.5 ohm	20 ns	.2 ohm	4 mm
MAX4707EXK-T	Maxim Integrated	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3.3 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G5		1	3.6 V	1.1 mm		1.25 mm	Not Qualified	NO	82 dB	2.7 V				e0	BREAK-BEFORE-MAKE		245	20 ns	3 ohm	15 ns		2 mm
MAX4707EXK+T	Analog Devices	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3.3 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G5		1	3.6 V	1.1 mm		1.25 mm	Not Qualified	NO	82 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	20 ns	3 ohm	15 ns		2 mm
NC7SZ66L6X	Onsemi	SPST	INDUSTRIAL	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD			1.8 V	3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	GOLD NICKEL	DUAL	R-PDSO-N6		1	5.5 V	.55 mm		1 mm	Not Qualified	NO	50 dB	1.65 V				e4		30	260	14.2 ns	60 ohm	18.2 ns	125 ohm	1.45 mm
SN74LV4051ADBR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	1	CMOS	35 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	2 mm	.05 A	5.3 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	225 ohm	28 ns	2.1 ohm	6.2 mm	5.5 V
TS3L110PWRE4	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	4	4		500 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	.128 A	4.4 mm	Not Qualified	NO	28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	7 ns	8 ohm	5 ns	.9 ohm	5 mm
TS5A3159ADCKRE4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1		100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	1.95 V	1.1 mm		1.25 mm	Not Qualified		64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	75 ns	2.5 ohm	50 ns	.15 ohm	2 mm	5.5 V
ADG419BRM-REEL	Analog Devices	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	TSSOP8,.19	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	16.5 V	1.75 mm		3.9 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		4.9 mm
ADG714BRU-REEL7	Analog Devices	SPST	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		8	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G24	SEPARATE OUTPUT	1	2.75 V	1.2 mm		4.4 mm	Not Qualified	NC	60 dB	2.25 V	ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE		240	32 ns	4.5 ohm	18 ns	.4 ohm	7.8 mm
ADG731BCP-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	HVQCCN	SQUARE	YES	UNSPECIFIED		1	32	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N48		3	2.75 V	1 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE		240	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm
CD4053BCN	National Semiconductor	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		3	1	CMOS		THROUGH-HOLE		-7.5 V	7.5 V	5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16				5.08 mm		7.62 mm	Not Qualified		40 dB					e0	BREAK-BEFORE-MAKE			320 ns	240 ohm	150 ns	5 ohm	19.304 mm
DG333ALDW-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-22 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	22 V	2.54 mm		7.5 mm	Not Qualified		72 dB	4 V			-4 V	e3	BREAK-BEFORE-MAKE			175 ns	45 ohm	145 ns	2 ohm	12.8 mm
DG406DJ	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	16	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T28			20 V	5.08 mm	.02 A	15.24 mm	Not Qualified		69 dB	5 V			-5 V	e0	BREAK-BEFORE-MAKE			400 ns	100 ohm	300 ns	5 ohm	37.4 mm
DG406DJ+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	16	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T28		1	20 V	5.08 mm	.02 A	15.24 mm	Not Qualified		69 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	1.5 ohm	36.83 mm
FSA551UCX	Onsemi	SPST	INDUSTRIAL	9	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY	.12 mA	1	2			BALL					GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA9,3X3,16		.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B9	SEPARATE OUTPUT	1	3 V	.619 mm		1.21 mm		NC	75 dB	1.5 V				e1		30	260		.6 ohm		.01 ohm	1.38 mm
MAX4051EEE	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V	IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY		-2.7 V	e0	BREAK-BEFORE-MAKE	20	240	175 ns	100 ohm	150 ns	12 ohm	4.9 mm
MAX4051EEE+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V			-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	12 ohm	4.9 mm
SN74LV4052ADGVR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	2	CMOS	50 kHz	GULL WING			2.5 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	3.6 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	35 ns	225 ohm	35 ns	1.5 ohm	4.4 mm	5.5 V
TS5A3159ADBVT	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1		100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	1.95 V	1.45 mm		1.6 mm	Not Qualified		64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	75 ns	2.5 ohm	50 ns	.15 ohm	2.9 mm	5.5 V
ADG1311YRUZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified		80 dB	13.5 V			-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns	200 ohm	60 ns	5 ohm	5 mm
ADG426BRS	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	16	BICMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28		1	16.5 V	2 mm	.02 A	5.3 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE		240	150 ns	80 ohm	150 ns	4 ohm	10.2 mm
ADG619BRTZ-REEL	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.45 mm	.05 A	1.6 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e4	BREAK-BEFORE-MAKE		260	120 ns	6.5 ohm	75 ns	.7 ohm	2.9 mm
ADG701BRJZ-500RL7	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2.9 mm
ADG707BRUZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	2.75 V	1.2 mm	.03 A	4.4 mm	Not Qualified		80 dB	2.25 V	CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES		-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	50 ns	4.5 ohm	26 ns	.3 ohm	9.7 mm
ADG779BKSZ-REEL	Analog Devices	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified		67 dB	1.8 V				e4	BREAK-BEFORE-MAKE		260	24 ns	10 ohm	7 ns	.1 ohm	2 mm
DG411DY-T	Maxim Integrated	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE	20	240	175 ns	45 ohm	145 ns	3 ohm	9.9 mm
DG411DY+T	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	45 ohm	145 ns	3 ohm	9.9 mm
DG413DJ-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE		-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1		5.08 mm		7.62 mm	Not Qualified	NO/NC	68 dB					e3	BREAK-BEFORE-MAKE	30	260	220 ns	35 ohm	160 ns		20.13 mm
DG441DJ-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1		5.08 mm		7.62 mm	Not Qualified	NC	60 dB					e3	BREAK-BEFORE-MAKE	30	260	250 ns	85 ohm	120 ns	4 ohm	20.13 mm
DG452EQ-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-5 V	5 V	+-5/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO		2.4 V	ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY			e3	BREAK-BEFORE-MAKE			256 ns	11 ohm	113 ns	.13 ohm	5 mm
DG467DV-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING	-20 V	-15 V	15 V	+-15/12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	20 V	1.1 mm		1.65 mm	Not Qualified	NC	61 dB	4.5 V	ALSO OPERATES WITH 7V TO 36V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE			160 ns	9 ohm	100 ns		3.05 mm
ISL43142IRZ-T	Intersil	SPST	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		NO LEAD	-6 V	-5 V	5 V	3/12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16		2	6 V	1 mm		3 mm	Not Qualified	NO/NC		2 V			-2 V	e3	BREAK-BEFORE-MAKE			80 ns	65 ohm	30 ns	2 ohm	3 mm
ISL54225IRTZ	Renesas Electronics	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD			3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N10		1	5.25 V	.85 mm		3 mm			30 dB	2.7 V				e3		30	260		20 ohm		.2 ohm	3 mm
MAX4634EUB	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified		80 dB	1.8 V				e0	BREAK-BEFORE-MAKE	20	240	24 ns	7 ohm	16 ns	.1 ohm	3 mm
MAX4634EUB+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified		80 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	22 ns	7 ohm	14 ns	.1 ohm	3 mm
NLAS4783BMN1R2G	Onsemi	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		3	1			NO LEAD			2.7 V	1.8/4	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	4.5 V	1 mm		3 mm	Not Qualified		62 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260	27 ns	1 ohm	20 ns		3 mm
SY55858UHG	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	32	HTQFP	SQUARE	YES	PLASTIC/EPOXY	190 mA	2	2			GULL WING			3.3 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE	TQFP32,.35SQ,31		.8 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G32	SEPARATE OUTPUT	3	3.6 V	1.2 mm		7 mm	Not Qualified			2.3 V				e4								7 mm
ADG412BRUZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		5 mm
ADG453BRUZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	5 mm
ADG506AKRZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	22.5 ohm	17.9 mm
ADG711BRU-REEL7	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE	30	240	20 ns	8 ohm	12 ns	.1 ohm	5 mm
CBTL04083ABS	NXP Semiconductors	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	42	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS		NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel		QUAD	R-PQCC-N42		2	3.6 V	1 mm		3.5 mm				3 V						30	260	300 ns		50 ns		9 mm
DG303BDJ-E3	Vishay Intertechnology	DPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1 mA	2	1	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T14	SEPARATE OUTPUT	1		5.08 mm		7.62 mm	Not Qualified	NO/NC	62 dB			-15 V		e3	BREAK-BEFORE-MAKE	30	260	150 ns	50 ohm	130 ns		18.285 mm	15 V
DG411DVZ-T	Renesas Electronics	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	20 V	1.2 mm		4.4 mm	Not Qualified		68 dB	5 V			-5 V	e3		30	260	175 ns	35 ohm	145 ns		5 mm
DG441DY	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16	SEPARATE OUTPUT			1.75 mm		3.9 mm	Not Qualified	NC	60 dB						BREAK-BEFORE-MAKE	30	240	250 ns	85 ohm	120 ns	4 ohm	9.9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.