INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
FSA4157FHX	Fairchild Semiconductor	SPDT	INDUSTRIAL	6	VQCCN	SQUARE	YES	UNSPECIFIED		1	1	CMOS			NO LEAD			4.5 V		CHIP CARRIER, VERY THIN PROFILE			.35 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	BOTTOM	S-XBCC-N6		1	5.5 V	.55 mm		1 mm	Not Qualified		70 dB	1.65 V				e4				60 ns	1.15 ohm	30 ns	.06 ohm	1 mm
SN74HC4066PW	Texas Instruments	SPST	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	4	4	CMOS		30 kHz	GULL WING			4.5 V	2/6	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	6 V	1.2 mm		4.4 mm	Not Qualified	NO	42 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	36 ns	150 ohm	40 ns		5 mm
TS5A3357DCURG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1			334 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified	NO	81 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	34 ns	50 ohm	14.5 ns	.3 ohm	2.3 mm	5.5 V
TS5A4624DCKRG4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.00015 mA	1	1				GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		63 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	70 ns	2.5 ohm	15 ns	.15 ohm	2 mm	6.5 V
ADG411BRUZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		5 mm
ISL54220IRTZ-T	Renesas Electronics	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY	.012 mA	2	1	CMOS			NO LEAD			3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20		.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N10	SEPARATE OUTPUT	1	5.5 V	.85 mm	.04 A	3 mm			32 dB	2.7 V		0 V		e3	BREAK-BEFORE-MAKE	30	260		8 ohm		.117 ohm	3 mm	5.5 V
MAX358EWE	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1 mA	1	8	CMOS			GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	18 V	2.642 mm	.02 A	7.6745 mm	Not Qualified		68 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			1000 ns	1800 ohm	1000 ns
MAX358EWE+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1 mA	1	8	CMOS			GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	18 V	2.642 mm	.02 A	7.6745 mm	Not Qualified		68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	1000 ns	1800 ohm	1000 ns
ADG201AKRZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NC	80 dB					e3	BREAK-BEFORE-MAKE	30	260	300 ns	90 ohm	250 ns	5 ohm	9.9 mm
ADG451BRUZ	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.2 mm		4.4 mm	Not Qualified	NC	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	5 mm
ADG788BCPZ	Analog Devices	SPDT	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS			NO LEAD	-2.75 V	-2.5 V	2.5 V	+-2.5/3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20	SEPARATE OUTPUT	3	2.75 V	.9 mm		4 mm	Not Qualified		72 dB	2.25 V	CAN ALSO OPERATE AT 5V NOMINAL		-2.25 V	e3	BREAK-BEFORE-MAKE		260	35 ns	4.5 ohm	16 ns	.1 ohm	4 mm
DG407DYZ	Renesas Electronics	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS			GULL WING		-15 V	15 V		SMALL OUTLINE	SOP28,.4		1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	SEPARATE OUTPUT	3		2.65 mm		7.5 mm			69 dB		ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY AND 12V ANALOG INPUT VOLTAGE			e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	2.5 ohm	17.9 mm
NLAS5223BMNR2G	Onsemi	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS			NO LEAD			3 V	1.8/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	4.5 V	.8 mm		1.4 mm	Not Qualified		68 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	50 ns	.4 ohm	30 ns	.05 ohm	1.8 mm
ADG506AKNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1.5 mA	1	16	CMOS			THROUGH-HOLE	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T28			16.5 V	5.08 mm	.02 A	15.24 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	22.5 ohm	36.705 mm
ADG904BCPZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4	CMOS			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20		3	2.75 V	1 mm		4 mm	Not Qualified		37 dB	1.65 V				e3			260	10 ns		16 ns		4 mm
DG413DY-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NO/NC	68 dB					e3	BREAK-BEFORE-MAKE	30	260	220 ns	35 ohm	160 ns		9.9 mm
HI9P0201-9Z	Renesas Electronics	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING		-15 V	15 V		SMALL OUTLINE				85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		3							80 dB					e3		30	260		80 ohm
SN74LVC2G66DCUTG4	Texas Instruments	SPST	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.015 mA	2	2	CMOS		300 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexers or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified	NO	42 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	5.6 ns	30 ohm	6.9 ns	5 ohm	2.3 mm	5.5 V
TS3L110PWR	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	4	4			500 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	.128 A	4.4 mm	Not Qualified	NO	28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	7 ns	8 ohm	5 ns	.9 ohm	5 mm
TS5A3359DCURG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	3				GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified	NO	64 dB	1.65 V		1.65 V		e4	BREAK-BEFORE-MAKE	30	260	85 ns	2.5 ohm	16 ns	.15 ohm	2.3 mm	5.5 V
AD8183ARUZ	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	30 mA	3	2	BIPOLAR			GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G24		1	5.5 V	1.2 mm		4.4 mm	Not Qualified		100 dB	4.5 V			-4.5 V	e3		30	260					7.8 mm
ADG728WBRUZ-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	AEC-Q100		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	3.3 V	1.2 mm		4.4 mm			55 dB	2.7 V	5 V NOMINAL VOLTAGE ALSO AVAILABLE			e3		30	260	200 ns	11 ohm	180 ns	.4 ohm	5 mm
ADG731BCPZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	HVQCCN	SQUARE	YES	UNSPECIFIED		1	32	CMOS			NO LEAD	-2.75 V	-2.5 V	2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N48		3	2.75 V	1 mm		7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e3			260	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm
ADG788BCPZ-REEL	Analog Devices	SPDT	INDUSTRIAL	20	VQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		4	1	CMOS			NO LEAD	-2.75 V	-2.5 V	2.5 V	+-2.5/3/5	CHIP CARRIER, VERY THIN PROFILE	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-CQCC-N20	SEPARATE OUTPUT	3	2.75 V	.9 mm		4 mm	Not Qualified		72 dB	2.25 V	CAN ALSO OPERATE AT 5V NOMINAL		-2.25 V	e3	BREAK-BEFORE-MAKE		260	35 ns	4.5 ohm	16 ns	.1 ohm	4 mm
DG202BDY-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-22 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	22 V	1.75 mm		3.9 mm	Not Qualified	NO	90 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	40	260	300 ns	85 ohm	200 ns	2 ohm	9.9 mm
MAX391ESE	Maxim Integrated	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-8 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified	NC	72 dB	3 V	ALSO OPERATE WITH 3 V TO 15 V SINGLE SUPPLY		-3 V	e0	BREAK-BEFORE-MAKE			130 ns	35 ohm	75 ns	.3 ohm	9.9 mm
MAX391ESE+	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-8 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified	NC	72 dB	3 V			-3 V	e3	BREAK-BEFORE-MAKE	30	260	130 ns	35 ohm	75 ns	.3 ohm	9.9 mm
MAX4648EUT-T	Maxim Integrated	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	20 V	1.45 mm		1.625 mm	Not Qualified	NO	92 dB	4.5 V	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 9V TO 36V		-4.5 V	e0	BREAK-BEFORE-MAKE			100 ns	25 ohm	100 ns	2 ohm	2.9 mm
MAX4648EUT+T	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	20 V	1.45 mm		1.625 mm	Not Qualified	NO	92 dB	4.5 V	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 9V TO 36V		-4.5 V	e4	BREAK-BEFORE-MAKE	30	260	100 ns	25 ohm	100 ns	2 ohm	2.9 mm
MAX4648EUT-T+	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	20 V	1.45 mm		1.625 mm	Not Qualified		92 dB	4.5 V	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 9V TO 36V		-4.5 V	e3				100 ns	25 ohm	100 ns		2.9 mm
TS3A24159DGSRG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.05 mA	2	2			23 kHz	GULL WING			1.8 V	1.8/3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	1.95 V	1.1 mm	.1 A	3 mm	Not Qualified		73 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	75 ns	.5 ohm	35 ns	.02 ohm	3 mm	3.6 V
TS5A3159ADBVRE4	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1			100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	1.95 V	1.45 mm		1.6 mm	Not Qualified		64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	75 ns	2.5 ohm	50 ns	.15 ohm	2.9 mm	5.5 V
TS5A3359DCURE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	3				GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1	5.5 V	.9 mm		2 mm	Not Qualified		64 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	85 ns	2.5 ohm	16 ns	.15 ohm	2.3 mm
ADG711BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	12 ns	.1 ohm	9.9 mm
FSA2466UMX	Onsemi	DPDT	INDUSTRIAL	16	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS			NO LEAD				1.8/4	CHIP CARRIER	LCC16,.07X.1,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260	80 ns	6 ohm
FSA3030UMX	Onsemi	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	QCCN	SQUARE	YES	PLASTIC/EPOXY		1					NO LEAD				2.5/4.5	CHIP CARRIER	LCC12,.08SQ,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N12	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260
FSA8009UMX	Onsemi	AUDIO/VIDEO SWITCH	INDUSTRIAL	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1					NO LEAD				2.5/4.3	CHIP CARRIER	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260		4 ohm
MAX4051AESE	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS			GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V	IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY		-2.7 V	e0	BREAK-BEFORE-MAKE			175 ns	100 ohm	150 ns	6 ohm	9.9 mm
MAX4051AESE+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS			GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V	IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	6 ohm	9.9 mm
MAX4052AEEE	Maxim Integrated	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS			GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V	IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY; CONFIGURABLE AS 8 CHANNEL SINGLE-ENDED MUX		-2.7 V	e0	BREAK-BEFORE-MAKE			175 ns	100 ohm	150 ns	6 ohm	4.9 mm
MAX4052AEEE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	4	CMOS			GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V			-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	6 ohm	4.9 mm
NX3DV221TKX	NXP Semiconductors	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		1	6				NO LEAD			2.5 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10		1	3.6 V	1 mm		3 mm			38 dB	2.3 V				e4		30	260	50 ns	7 ohm	23 ns	.1 ohm	3 mm
NX5L2750CGUX	NXP Semiconductors	SPDT	INDUSTRIAL	10	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2					NO LEAD				1.8/5	CHIP CARRIER	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		QUAD	R-PQCC-N10	SEPARATE OUTPUT	1					Not Qualified	NC							BREAK-BEFORE-MAKE		260		1.3 ohm
OPA4872IDR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	11.7 mA	1	1	BIPOLAR			GULL WING	-6 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	COMMON OUTPUT	2	12 V	1.75 mm		3.9 mm	Not Qualified	NO	88 dB	7 V			-3.5 V	e4		30	260					8.65 mm
SN74LV4052AD	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	2	CMOS		50 kHz	GULL WING			2.5 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm	.05 A	3.9 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	35 ns	225 ohm	35 ns	1.5 ohm	9.9 mm	5.5 V
TS5A23157DGST	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.01 mA	2	2			220 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	60 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	24 ns	140 ohm	13 ns	1 ohm	3 mm	5.5 V
ADG432BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	165 ns	24 ohm	130 ns	.85 ohm	9.9 mm
HEF4066BP	NXP Semiconductors	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE			5 V	5/15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14	SEPARATE OUTPUT		15 V	4.2 mm		7.62 mm	Not Qualified	NO	50 dB	3 V				e4				80 ns	365 ohm	160 ns	25 ohm	19.025 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.