INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ISL43210IHZ-T7A	Renesas Electronics	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3.3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	12 V	1.45 mm		1.6 mm			76 dB	2.7 V				e3		30	260	120 ns	50 ohm	50 ns	.8 ohm	2.9 mm
FSA4157P6	Onsemi	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			4.5 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified		70 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260	65 ns	1.15 ohm	40 ns	.06 ohm	2 mm
DG413DYZ-T	Renesas Electronics	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		3	20 V	1.75 mm		3.9 mm	Not Qualified		68 dB	5 V	ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY		-5 V	e3		30	260	175 ns	35 ohm	145 ns		9.9 mm
FSA3357K8X	Onsemi	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.3 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified		58 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260	15 ns	30 ohm	7.2 ns	.31 ohm	2.3 mm
MAX14531EEWC+T	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	12	BGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BICMOS		BALL			3 V		GRID ARRAY				85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V						65 dB	2.7 V				e1		30	260	250000 ns	3 ohm	6000 ns
TS5A3166DBVRE4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0008 mA	1	1		200 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	64 dB	1.65 V		-.5 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	19 ns	3.4 ohm	17.5 ns		2.9 mm	7 V
ADG409BRZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	4	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	15 ohm	9.9 mm
ADG711BRUZ	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	12 ns	.1 ohm	5 mm
ADG715BRUZ-REEL	Analog Devices	SPST	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	25 mA	8	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G24	SEPARATE OUTPUT	1	2.75 V	1.2 mm		4.4 mm	Not Qualified	NO	60 dB	2.25 V	ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY	0 V	-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	4.5 ohm	190 ns	.4 ohm	7.8 mm	2.5 V
ADG884BRMZ-REEL	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	60 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	56 ns	.5 ohm	19 ns	.02 ohm	3 mm
ISL43210IHZ-T	Renesas Electronics	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING			3.3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	COMMON OUTPUT	1	12 V	1.45 mm		1.625 mm			76 dB	2.7 V		0 V		e3	BREAK-BEFORE-MAKE	30	260		50 ohm		.8 ohm	2.9 mm	12 V
MAX14757EUE+T	Analog Devices	DPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4		BICMOS		GULL WING				3.3,10/70/+-35	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1					Not Qualified	NO						e3	BREAK-BEFORE-MAKE	30	260	60000 ns	10 ohm
TS5A3359DCUR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1		75 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified		64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	85 ns	3.5 ohm	16 ns	.15 ohm	2.3 mm	5.5 V
MAX4564EKA-T	Maxim Integrated	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-6 V	-5 V	5 V	+-5,3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1	6 V	1.45 mm		1.625 mm	Not Qualified	NC	77 dB	2 V			-2 V	e4	BREAK-BEFORE-MAKE		245	60 ns	60 ohm	40 ns	.75 ohm	2.9 mm
MAX4564EKA+T	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-6 V	-5 V	5 V	+-5,3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1	6 V	1.45 mm		1.625 mm	Not Qualified	NC	77 dB	2 V			-2 V	e4	BREAK-BEFORE-MAKE	30	260	60 ns	60 ohm	40 ns	.75 ohm	2.9 mm
ADG619BRMZ	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	6.5 ohm	75 ns	.7 ohm	3 mm
ADG711BRUZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	12 ns	.1 ohm	5 mm
MAX313LEUE-T	Maxim Integrated	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V	+-4.5/+-20/4.5/36	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.1 mm		4.4 mm	Not Qualified	NO	75 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			425 ns	10 ohm	225 ns	.3 ohm	5 mm
MAX313LEUE+T	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V	+-4.5/+-20/4.5/36	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.1 mm		4.4 mm	Not Qualified	NO	75 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	225 ns	10 ohm	185 ns	.3 ohm	5 mm
ADG508AKNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	5.33 mm	.02 A	7.62 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	22.5 ohm	20.07 mm
ADG508AKNZ/+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS		THROUGH-HOLE	-16.5 V				IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	4.32 mm		7.62 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3				300 ns	450 ohm	300 ns	14 ohm	19.055 mm
ADG451BRUZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.2 mm		4.4 mm	Not Qualified	NC	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	5 mm
FSA221UMX	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	2			NO LEAD			3.3 V	3/4.2,5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	3.6 V	.55 mm		1.4 mm	Not Qualified		37 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	10000 ns	5 ohm	10000 ns	.4 ohm	1.8 mm
MAX4714EXT-T	Maxim Integrated	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			1.8 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6		1	3.6 V	1.1 mm		1.25 mm	Not Qualified		54 dB	1.6 V	CAN ALSO OPERATE AT 3V NOMINAL			e4	BREAK-BEFORE-MAKE	20	240	30 ns	2.5 ohm	18 ns	.06 ohm	2 mm
MAX4714EXT+T	Analog Devices	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			1.8 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	3.6 V	1.1 mm		1.25 mm	Not Qualified		54 dB	1.6 V	CAN ALSO OPERATE AT 1.8V NOMINAL			e4	BREAK-BEFORE-MAKE	30	260	25 ns	2.5 ohm	15 ns	.06 ohm	2 mm
NX3DV221GM,115	NXP Semiconductors		INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	6	CMOS		NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.58 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1	3.6 V	.5 mm		1.55 mm	Not Qualified		38 dB	2.3 V				e3	BREAK-BEFORE-MAKE	30	260	50 ns	7 ohm	23 ns	.1 ohm	2 mm
TS3A44159PWRG4	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0007 mA	2	4	CMOS	35 kHz	GULL WING			1.8 V	1.8/4.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	4.3 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	71 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	75 ns	.8 ohm	50 ns	.05 ohm	5 mm	4.3 V
MAX4659ESA-T	Maxim Integrated	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-20 V	-15 V	15 V	9/40/+-4.5/+-20	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	20 V	1.75 mm		3.9 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			150 ns	25 ohm	150 ns	.4 ohm	4.9 mm
MAX4659ESA+T	Analog Devices	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-20 V	-15 V	15 V	9/40/+-4.5/+-20	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1	20 V	1.75 mm		3.9 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	25 ohm	150 ns	.4 ohm	4.9 mm
SN74HC4066DBR	Texas Instruments	SPST	INDUSTRIAL	14	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	4	4	CMOS	30 kHz	GULL WING			4.5 V	2/6	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	6 V	2 mm		5.3 mm	Not Qualified	NO	42 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	36 ns	150 ohm	40 ns		6.2 mm
SN74LV4052APWRE4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	2	CMOS	50 kHz	GULL WING			2.5 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	35 ns	225 ohm	35 ns	1.5 ohm	5 mm	5.5 V
CD4052BCN	National Semiconductor	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	4	CMOS		THROUGH-HOLE		-7.5 V	7.5 V	5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16				5.08 mm		7.62 mm	Not Qualified		40 dB					e0	BREAK-BEFORE-MAKE			320 ns	240 ohm	150 ns	5 ohm	19.304 mm
FSUSB31L8X	Onsemi	SPST	INDUSTRIAL	8	VQCCN	SQUARE	YES	UNSPECIFIED		1	1			NO LEAD			3.3 V	3.3	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N8	SEPARATE OUTPUT	1	4.3 V	.55 mm		1.6 mm	Not Qualified	NC	35 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	10 ohm	25 ns	.35 ohm	1.6 mm
TS5A22362DGSRG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.005 mA	2	2		18.3 kHz	GULL WING			2.5 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	68 dB	2.3 V		-3.2 V		e4	BREAK-BEFORE-MAKE	30	260	120 ns	1.3 ohm	70 ns	.15 ohm	3 mm	5.5 V
ADG731BSUZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	FLATPACK, THIN PROFILE, FINE PITCH	QFP48,.35SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G48		3	2.75 V	1.2 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e3	BREAK-BEFORE-MAKE		260	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm
DG442DY	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16	SEPARATE OUTPUT			1.75 mm		3.9 mm	Not Qualified	NO	60 dB						BREAK-BEFORE-MAKE	30	240	250 ns	85 ohm	210 ns	4 ohm	9.9 mm
DG442DY+	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO	60 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	250 ns	85 ohm	120 ns	4 ohm	9.9 mm
HMC8038LP4CE	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	105 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	5.4 V	1 mm		4 mm				3 V				e3		30	260					4 mm
DG468DV-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING	-20 V	-15 V	15 V	+-15/12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	20 V	1.1 mm		1.65 mm	Not Qualified	NO	61 dB	4.5 V	ALSO OPERATES WITH 7V TO 36V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE			160 ns	9 ohm	100 ns		3.05 mm
FSA1153UCX	Onsemi	AUDIO/VIDEO SWITCH	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	2			BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V	.637 mm		1.41 mm			65 dB	2.7 V				e1		30	260		2 ohm		.2 ohm	1.575 mm
ADG408BRU-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.2 mm	.02 A	4.4 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e0	BREAK-BEFORE-MAKE		240	150 ns	100 ohm	150 ns	15 ohm	5 mm
ADG419BRM-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	TSSOP8,.19	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	16.5 V	1.75 mm		3.9 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		4.9 mm
ADG734BRUZ-REEL	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	2.75 V	1.2 mm		4.4 mm	Not Qualified		72 dB	2.25 V			-2.25 V	e3	BREAK-BEFORE-MAKE		260	35 ns	4.5 ohm	16 ns	.1 ohm	6.5 mm
CD4053BCM	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	LSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	2	CMOS		GULL WING			10 V	5/15	SMALL OUTLINE, LOW PROFILE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16			15 V	1.549 mm		3.899 mm	Not Qualified			5 V					BREAK-BEFORE-MAKE			1200 ns	400 ohm	420 ns	10 ohm	9.902 mm
DG403DJ-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS		THROUGH-HOLE	-22 V	-15 V	15 V	5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	22 V	5.08 mm		7.62 mm	Not Qualified	NO/NC	72 dB					e3	BREAK-BEFORE-MAKE	30	260	150 ns	45 ohm	100 ns	3 ohm	20.13 mm
MAX4886ETO+	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	42	HVQCCN	RECTANGULAR	YES	UNSPECIFIED		4	1	BICMOS		NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	R-XQCC-N42	SEPARATE OUTPUT	1	3.6 V	.8 mm		3.5 mm	Not Qualified		58 dB	3 V				e3		30	260		11 ohm		.28 ohm	9 mm
TS3A24159DGSR	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.05 mA	2	2		23 kHz	GULL WING			1.8 V	1.8/3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	1.95 V	1.1 mm	.1 A	3 mm	Not Qualified		73 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	75 ns	.5 ohm	35 ns	.02 ohm	3 mm	3.6 V
TS3A5018DBQR	Texas Instruments	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	4	4		300 kHz	GULL WING			2.5 V	2.5/3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	2	3.6 V	1.75 mm	.1 A	3.9 mm	Not Qualified	NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10.5 ns	22 ohm	9 ns	.4 ohm	4.9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.