INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Adjustable Threshold	Maximum Input Voltage
MAX14777GTP+T	Analog Devices	SPST	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	BICMOS		NO LEAD			5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N20		1	5.5 V	.8 mm		4 mm			66 dB	3 V				e3		30	260	40000 ns	10 ohm	10000 ns		4 mm
ADG721BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	40	260	24 ns	10 ohm	11 ns	.3 ohm	3 mm
TS3USB3031RMGR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL		VQCCN	SQUARE	YES	PLASTIC/EPOXY	.04 mA		2		6500 kHz	NO LEAD					CHIP CARRIER, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N12	SEPARATE OUTPUT	1	4.3 V	.75 mm		1.8 mm		NC		2.5 V		0 V		e4	BREAK-BEFORE-MAKE	30	260		6 ohm			1.8 mm		3.6 V
SN74LV4053ADBR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	3	3	CMOS	50 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	2 mm	.05 A	5.3 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	225 ohm	28 ns	2 ohm	6.2 mm		5.5 V
TS5A3159DCKR	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1		100 kHz	GULL WING			1.8 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		63 dB	1.65 V	2-CHANNEL MUX/DEMUX	0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	95 ns	3.2 ohm	70 ns	.7 ohm	2 mm		5.5 V
DG406DN-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn)	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.02 A	11.5062 mm	Not Qualified		69 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	5 ohm	11.5062 mm
NCP330MUTBG	Onsemi	SPST	INDUSTRIAL	4	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			NO LEAD			5 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.06,20		.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	DUAL	R-PDSO-N4		1	5.5 V	.55 mm		1.2 mm				1.8 V		0 V		e1		30	260		50 ohm			1.6 mm		5.5 V
MAX14777GTP+	Analog Devices	SPST	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	BICMOS		NO LEAD			5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N20		1	5.5 V	.8 mm		4 mm			66 dB	3 V				e3		30	260	40000 ns	10 ohm	10000 ns		4 mm
TS3A44159RSVR	Texas Instruments	SPDT	INDUSTRIAL	16	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.0007 mA	2	4	CMOS	35 kHz	NO LEAD			1.8 V	1.8/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC16,.07X.1,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	R-PQCC-N16	SEPARATE OUTPUT	1	4.3 V	.55 mm		1.8 mm	Not Qualified	NO/NC	71 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	75 ns	.8 ohm	50 ns	.05 ohm	2.6 mm		4.3 V
MPC506AUG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	1	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	COMMON OUTPUT	2		2.65 mm	.02 A	7.5 mm	Not Qualified	NO	68 dB			-15 V		e4	BREAK-BEFORE-MAKE	30	260	500 ns	1800 ohm	500 ns		17.9 mm		15 V
ADG333ABRSZ-REEL	Analog Devices	SPDT	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.35 mA	4	1	BICMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1		2 mm		5.3 mm	Not Qualified		72 dB					e3	BREAK-BEFORE-MAKE		260	175 ns	45 ohm	145 ns	4 ohm	7.2 mm
SN74LV4051APWRG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	1	CMOS	35 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	225 ohm	28 ns	2.1 ohm	5 mm		5.5 V
TS3A44159RSVRG4	Texas Instruments	SPDT	INDUSTRIAL	16	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.0007 mA	2	4	CMOS	35 kHz	NO LEAD			1.8 V	1.8/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC16,.07X.1,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	R-PQCC-N16	SEPARATE OUTPUT	1	4.3 V	.55 mm		1.8 mm	Not Qualified	NO/NC	71 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	75 ns	.8 ohm	50 ns	.05 ohm	2.6 mm		4.3 V
MAX313FESE-T	Maxim Integrated	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NC	55 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			225 ns	10 ohm	185 ns	.05 ohm	9.9 mm
MAX313FESE+T	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NC	55 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	225 ns	10 ohm	185 ns	.05 ohm	9.9 mm
ADG408BRZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	8	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	15 ohm	9.9 mm
ADG601BRTZ-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e4	BREAK-BEFORE-MAKE	30	260	120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG412BRZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		9.9 mm
TS3A5017PWR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	2	2		165 kHz	GULL WING			2.5 V	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	COMMON OUTPUT	1	3.6 V	1.2 mm	.1 A	4.4 mm	Not Qualified	NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10 ns	24 ohm	6 ns	1 ohm	5 mm
AD8170ARZ	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	11 mA	1	2	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified							e3		30	260	17 ns				4.9 mm
SN74LVC2G66DCURG4	Texas Instruments	SPST	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.015 mA	2	2	CMOS	300 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexers or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified	NO	42 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	5.6 ns	30 ohm	6.9 ns	5 ohm	2.3 mm		5.5 V
AD8174ARZ	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	13 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14		1		1.75 mm		3.9 mm	Not Qualified							e3		30	260	17 ns				8.65 mm
ADG619BRTZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.45 mm	.05 A	1.6 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e4	BREAK-BEFORE-MAKE	40	260	120 ns	6.5 ohm	75 ns	.7 ohm	2.9 mm
ADG406BPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
SN74LV4052ANSR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	2	CMOS	50 kHz	GULL WING			2.5 V	3.3	SMALL OUTLINE	SOP16,.3	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	2 mm	.05 A	5.3 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	35 ns	225 ohm	35 ns	1.5 ohm	10.2 mm		5.5 V
NC7SZ66M5X_NL	Fairchild Semiconductor	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.3 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5		1	5.5 V	1.4 mm		1.6 mm	Not Qualified	NO	50 dB	1.65 V				e3				7 ns	30 ohm	9 ns	125 ohm	2.9 mm
CD4066BCN	Texas Instruments	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE			5 V		IN-LINE			2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T14			15 V	5.08 mm		7.62 mm				3 V								125 ns	1050 ohm	125 ns	10 ohm	19.18 mm
DG412DY-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NO	68 dB					e3	BREAK-BEFORE-MAKE	30	260	220 ns	35 ohm	160 ns		9.9 mm
ADG714BRUZ	Analog Devices	SPST	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	25 mA	8	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G24	SEPARATE OUTPUT	1	2.75 V	1.2 mm		4.4 mm	Not Qualified	NO	60 dB	2.25 V	ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY	0 V	-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	32 ns	4.5 ohm	18 ns	.4 ohm	7.8 mm		2.5 V
SN74LV4053ADR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	3	3	CMOS	50 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm	.05 A	3.9 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	225 ohm	28 ns	2 ohm	9.9 mm		5.5 V
TS3USB221ARSERG4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.03 mA	1	1		900 kHz	NO LEAD			2.5 V		CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1	3.6 V	.6 mm		1.5 mm	Not Qualified	NO	40 dB	2.3 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	50 ns	6 ohm	23 ns	.2 ohm	2 mm		5.5 V
MAX313FEPE	Maxim Integrated	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP16,.25	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	20 V	4.572 mm		7.62 mm	Not Qualified	NC	55 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			225 ns	10 ohm	185 ns	.05 ohm	19.175 mm
ADG621BRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
SN74LV4052ATPWRQ1	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	1	2	CMOS	50 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	25 ns	225 ohm	25 ns	40 ohm	5 mm		5.5 V
TS5A3166DBVR	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0008 mA	1	1		200 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	64 dB	1.65 V		-.5 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	19 ns	3.4 ohm	17.5 ns		2.9 mm		7 V
ADG426BRSZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	16	BICMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		3	16.5 V	2 mm	.02 A	5.3 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	40	260	150 ns	80 ohm	150 ns	4 ohm	10.2 mm
SN74LV4053AD	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	3	3	CMOS	50 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm	.05 A	3.9 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	225 ohm	28 ns	2 ohm	9.9 mm		5.5 V
SN74LVC2G66DCTR	Texas Instruments	SPST	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.015 mA	2	2	CMOS	300 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.3 mm		2.8 mm	Not Qualified	NO	42 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	5.6 ns	30 ohm	6.9 ns	5 ohm	2.95 mm		5.5 V
ADG732BSUZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY	.02 mA	1	32	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G48		3	2.75 V	1.2 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V			-2.25 V	e3	BREAK-BEFORE-MAKE		260	37 ns	5.5 ohm	26 ns	.3 ohm	7 mm
ADG507AKPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.51 mm	.02 A	11.506 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
ADG884BRMZ	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	60 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	56 ns	.5 ohm	19 ns	.02 ohm	3 mm
ADG452BRZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	9.9 mm
ADG734BRUZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	2.75 V	1.2 mm		4.4 mm	Not Qualified		72 dB	2.25 V			-2.25 V	e3	BREAK-BEFORE-MAKE		260	35 ns	4.5 ohm	16 ns	.1 ohm	6.5 mm
TS5A23157RSERG4	Texas Instruments	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	2	1			NO LEAD			1.8 V	1.8/5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1	5.5 V	.6 mm		1.5 mm	Not Qualified	NO/NC	60 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	24 ns	140 ohm	13 ns	1 ohm	2 mm		5.5 V
ADG728BRUZ-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.01 A	4.4 mm	Not Qualified		75 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	200 ns	11 ohm	180 ns	.4 ohm	5 mm
TMUX136RSER	Texas Instruments	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.05 mA	1	2		6100 kHz	NO LEAD					CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10		1		.6 mm	.1 A	2 mm								e4		30	260		7.5 ohm			1.5 mm
DG413DY-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NO/NC	68 dB					e3	BREAK-BEFORE-MAKE	30	260	220 ns	35 ohm	160 ns		9.9 mm
NCP45524IMNTWG-H	Onsemi	SPST	INDUSTRIAL	8	HVSON	SQUARE	YES	PLASTIC/EPOXY	.68 mA	1	1			NO LEAD			3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20		.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N8		3	5.5 V	1 mm		2 mm				3 V				e3		30	260		.0317 ohm			2 mm	NO

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.