INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Nominal Threshold Voltage (V)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Adjustable Threshold	Maximum Input Voltage
ADG408BRZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm		150 ns	15 ohm	9.9 mm
NC7SZ66P5X	Onsemi	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			1.8 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5		1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NO	50 dB	1.65 V				e3		30	260	14.2 ns	60 ohm		18.2 ns	125 ohm	2 mm
ADG509FBRNZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	2	4	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	390 ohm		150 ns	8.1 ohm	9.9 mm
FSUSB42UMX	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	4			NO LEAD			3.3 V	3/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	4.3 V	.55 mm		1.4 mm	Not Qualified		30 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	6.5 ohm		25 ns	.65 ohm	1.8 mm
TS3A44159RGTR	Texas Instruments	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.0007 mA	2	4	CMOS	35 kHz	NO LEAD			1.8 V	1.8/4.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1	4.3 V	1 mm		3 mm	Not Qualified	NO/NC	71 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	75 ns	.8 ohm		50 ns	.05 ohm	3 mm		4.3 V
TS3A44159RGTRG4	Texas Instruments	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.0007 mA	2	4	CMOS	35 kHz	NO LEAD			1.8 V	1.8/4.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1	4.3 V	1 mm		3 mm	Not Qualified	NO/NC	71 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	75 ns	.8 ohm		50 ns	.05 ohm	3 mm		4.3 V
DG406DYZ-T	Renesas Electronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	16	CMOS		GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		3		2.65 mm		7.5 mm					ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY AND 12V ANALOG INPUT VOLTAGE			e3		30	260	200 ns	100 ohm		150 ns		17.9 mm
DG419DY-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING		-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	250 ns	35 ohm		210 ns		4.9 mm
ADG1311YRUZ	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified		80 dB	13.5 V			-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns	200 ohm		60 ns	5 ohm	5 mm
DG409DY-E3	Vishay Intertechnology	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	2	4	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G16		1	20 V	1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm		150 ns	15 ohm	9.9 mm
PCA9546APW,118	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.1 mA	1	4			GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.1 mm		4.4 mm				2.3 V				e4		30	260	.3 ns	55 ohm		.3 ns		5 mm
ADG704BRMZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.03 A	3 mm	Not Qualified		60 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE		260	24 ns	8 ohm		16 ns	.1 ohm	3 mm
ADG509FBRNZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	2	4	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	390 ohm		150 ns	8.1 ohm	9.9 mm
ADG419BRMZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	16.5 V	1.09 mm		3 mm	Not Qualified		80 dB	13.5 V			-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	160 ns	35 ohm		160 ns		3 mm
SIP32419DN-T1-GE4	Vishay Intertechnology	SPST	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		1	1			NO LEAD			12 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20		.5 mm	85 Cel	-40 Cel		DUAL	S-PDSO-N10			28 V	1 mm		3 mm				6 V						NOT SPECIFIED	NOT SPECIFIED		.072 ohm	+4.8V			3 mm	YES
DG409DYZ	Renesas Electronics	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		2	20 V	1.75 mm		3.9 mm	Not Qualified		75 dB	5 V	ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY		-5 V	e3		30	260	150 ns	100 ohm		150 ns	15 ohm	9.9 mm
TS5A23157RSER	Texas Instruments	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	2	2		220 kHz	NO LEAD			1.8 V	1.8/5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1	5.5 V	.6 mm		1.5 mm	Not Qualified	NO/NC	60 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	24 ns	140 ohm		13 ns	1 ohm	2 mm		5.5 V
ADG201HSJNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V		IN-LINE	DIP16,.3		2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT		16.5 V	4.32 mm		7.62 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE		-13.5 V	e3	BREAK-BEFORE-MAKE			75 ns	75 ohm		75 ns	1.5 ohm	19.055 mm
TS3USB221RSER	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.03 mA	1	1		1100 kHz	NO LEAD			2.5 V		CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1	3.6 V	.6 mm		1.5 mm	Not Qualified	NO	40 dB	2.3 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	50 ns	6 ohm		23 ns	.2 ohm	2 mm		5.5 V
FSA5157P6X	Onsemi	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.3 V	1.8/4	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	4.3 V	1.1 mm		1.25 mm	Not Qualified		75 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260	65 ns	.8 ohm		40 ns	.12 ohm	2 mm
NLAS4157DFT2G	Onsemi	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			2.7 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		52 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260	30 ns	4 ohm		20 ns	.15 ohm	2 mm
SN74LVC1G3157DRLR	Texas Instruments	SPDT	INDUSTRIAL	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA	1	1	CMOS	340 kHz	NO LEAD			2.3 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE	TSSOP6,.06,20	Multiplexers or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-N6	COMMON OUTPUT	1	5.5 V	.6 mm		1.2 mm	Not Qualified	NC	57 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	14 ns	30 ohm		7.5 ns	.1 ohm	1.6 mm
SN74LVC1G3157DRYR	Texas Instruments	SPDT	INDUSTRIAL	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA	1	1	CMOS	340 kHz	NO LEAD			2.3 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexers or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N6	COMMON OUTPUT	1	5.5 V	.6 mm		1 mm	Not Qualified	NC	57 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	14 ns	30 ohm		7.5 ns	.1 ohm	1.45 mm
TC4066BP	Toshiba	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.03 mA	4	1	CMOS		THROUGH-HOLE			5 V	5/15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT			4.45 mm		7.62 mm	Not Qualified	NO								30	260	120 ns	950 ohm			10 ohm	19.25 mm
TC4066BP(F)	Toshiba	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS		THROUGH-HOLE				5/15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT						Not Qualified	NO											1200 ohm
ADG706BRUZ-REEL7	Analog Devices	SPST	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	16	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		80 dB	2.25 V	CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES		-2.25 V	e3		30	260	50 ns	4.5 ohm		26 ns	.3 ohm	9.7 mm
SN74LVC1G3157YZPR	Texas Instruments	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.035 mA	1	1	CMOS	340 kHz	BALL			2.3 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexers or Switches	.5 mm	85 Cel	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-XBGA-B6	COMMON OUTPUT	1	5.5 V	.5 mm		.9 mm	Not Qualified	NC	57 dB	1.65 V				e1	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	14 ns	30 ohm		7.5 ns	.1 ohm	1.4 mm
TS5A21366DCUR	Texas Instruments	SPST	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.005 mA	2	2	CMOS	260 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified	NO	59 dB	1.65 V	VIDEO APPLICATION	0 V		e3	MAKE-BEFORE-BREAK	30	260	620 ns	5 ohm		514 ns	.045 ohm	2.3 mm		5.5 V
TS3USB221DRCR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY	.03 mA	1	1		1100 kHz	NO LEAD			2.5 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N10	SEPARATE OUTPUT	2	3.6 V	1 mm		3 mm	Not Qualified	NO	40 dB	2.3 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	50 ns	6 ohm		23 ns	.2 ohm	3 mm		5.5 V
TS5A23157DGSR	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.01 mA	2	2		220 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	60 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	24 ns	140 ohm		13 ns	1 ohm	3 mm		5.5 V
SN74LV4051ADR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	1	CMOS	35 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm	.05 A	3.9 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	225 ohm		28 ns	2.1 ohm	9.9 mm		5.5 V
CD4051BCM	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING			10 V	5/15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16			15 V	1.753 mm		3.9 mm	Not Qualified		40 dB	5 V					BREAK-BEFORE-MAKE			1200 ns	400 ohm		420 ns	10 ohm	9.902 mm
ADG508FBRNZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	390 ohm		150 ns	8.1 ohm	9.9 mm
FSUSB30MUX	Onsemi	DPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	2			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	4.3 V	1.1 mm		3 mm	Not Qualified		30 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	30 ns	10 ohm		25 ns	.35 ohm	3 mm
FSA4157AP6X	Onsemi	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			4.5 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified		70 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	65 ns	1.15 ohm		30 ns	.06 ohm	2 mm
AD8184ARZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	5.7 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14		1		1.75 mm		3.9 mm	Not Qualified		115 dB					e3		30	260						8.65 mm
ADG426BRSZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	16	BICMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		3	16.5 V	2 mm	.02 A	5.3 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	80 ohm		150 ns	4 ohm	10.2 mm
ADG508AKRZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	450 ohm		300 ns	22.5 ohm	9.9 mm
ADG419BRMZ-REEL	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	16.5 V	1.09 mm		3 mm	Not Qualified		80 dB	13.5 V			-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	160 ns	35 ohm		160 ns		3 mm
HEF4051BT,653	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	8	CMOS		GULL WING		0 V	15 V	5/15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16		1	15 V	1.75 mm	.01 A	3.9 mm	Not Qualified		50 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	80 ns	175 ohm		230 ns	5 ohm	9.9 mm
ADG333ABRSZ	Analog Devices	SPDT	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.35 mA	4	1	BICMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1		2 mm		5.3 mm	Not Qualified		72 dB					e3	BREAK-BEFORE-MAKE		260	175 ns	45 ohm		145 ns	4 ohm	7.2 mm
DG409DYZ-T	Renesas Electronics	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		2	20 V	1.75 mm		3.9 mm	Not Qualified		75 dB	5 V	ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY		-5 V	e3		30	260	150 ns	100 ohm		150 ns	15 ohm	9.9 mm
SIP32429DN-T1-GE4	Vishay Intertechnology	SPST	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		1	1			NO LEAD			12 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20		.5 mm	85 Cel	-40 Cel		DUAL	S-PDSO-N10			28 V	1 mm		3 mm				6 V						NOT SPECIFIED	NOT SPECIFIED		.072 ohm	+4.8V			3 mm	YES
MPC508AU/1K	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	COMMON OUTPUT	2		2.65 mm	.02 A	7.5 mm	Not Qualified	NO	68 dB			-15 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	500 ns	1500 ohm		500 ns		10.3 mm		15 V
MPC508AU/1KG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	COMMON OUTPUT	2		2.65 mm	.02 A	7.5 mm	Not Qualified	NO	68 dB			-15 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	500 ns	1500 ohm		500 ns		10.3 mm		15 V
DG408DY-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16			20 V	1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB	5 V			-5 V	e0	BREAK-BEFORE-MAKE	20	240	225 ns	100 ohm		300 ns	1.5 ohm	9.9 mm
DG408DY+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm		150 ns	1.5 ohm	9.9 mm
FSA2257MUX	Onsemi	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified		70 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	50 ns	4.5 ohm		20 ns	.7 ohm	3 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.