INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
HEF4066BT	NXP Semiconductors	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			5 V	5/15	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	15 V	1.75 mm		3.9 mm	Not Qualified	NO	50 dB	3 V				e4		30	260	80 ns	365 ohm	160 ns	25 ohm	8.65 mm
HMC8038LP4CETR	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	105 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	5.4 V	1 mm		4 mm				3 V				e3		30	260					4 mm
MPC506AU/1K	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	1	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	COMMON OUTPUT	2		2.65 mm	.02 A	7.5 mm	Not Qualified	NO	68 dB			-15 V		e4	BREAK-BEFORE-MAKE	30	260	500 ns	1800 ohm	500 ns		17.9 mm	15 V
DG407DYZ-T	Renesas Electronics	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		3		2.65 mm		7.5 mm					ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY AND 12V ANALOG INPUT VOLTAGE			e3		30	260	200 ns	100 ohm	150 ns		17.9 mm
MAX14662ETI+	Analog Devices	SPST	INDUSTRIAL	28	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1	CMOS		NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N28		1	5.5 V	.8 mm		4 mm			40 dB	1.6 V				e3		30	260	60000 ns	1 ohm		.02 ohm	4 mm
ADG408BRZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	15 ohm	9.9 mm
SN74LV4053APWR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	3	3	CMOS	50 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	225 ohm	28 ns	2 ohm	5 mm	5.5 V
TS5A3159DCKRG4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified		63 dB	1.65 V	2-CHANNEL MUX/DEMUX			e4	BREAK-BEFORE-MAKE	30	260	95 ns	3.2 ohm	70 ns	.7 ohm	2 mm
TS5A3166DBVRG4	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0008 mA	1	1		200 kHz	GULL WING			1.8 V	1.8/5.5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	64 dB	1.65 V		-.5 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	19 ns	3.4 ohm	17.5 ns		2.9 mm	7 V
ADG452BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	9.9 mm
ADG738BRUZ-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.01 A	4.4 mm	Not Qualified		75 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	70 ns	11 ohm	25 ns	.4 ohm	5 mm
DG403DY-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-22 V	-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	22 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	72 dB					e3	BREAK-BEFORE-MAKE	30	260	150 ns	45 ohm	100 ns	3 ohm	9.9 mm
ADG884BRMZ-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	60 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	56 ns	.5 ohm	19 ns	.02 ohm	3 mm
AP2822AKATR-G1	Diodes Incorporated	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.6 mm				2.7 V				e3			260		.11 ohm			2.92 mm
TS5A23159DGSTE4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.0005 mA	2	2		105 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm	.1 A	3 mm	Not Qualified	NO/NC	64 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	55 ns	3.5 ohm	12 ns	.15 ohm	3 mm	5.5 V
ADG601BRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e4	BREAK-BEFORE-MAKE		260	120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
TS5A23159RSER	Texas Instruments	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	2	2		105 kHz	NO LEAD			1.8 V	1.8/5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N10	SEPARATE OUTPUT	1	5.5 V	.6 mm	.1 A	1.5 mm	Not Qualified	NO/NC	64 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	55 ns	3.5 ohm	12 ns	.15 ohm	2 mm	5.5 V
PI5A3157CEX	Diodes Incorporated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.3 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	57 dB	1.65 V				e3	BREAK-BEFORE-MAKE			13 ns	24 ohm	7 ns	.3 ohm	2 mm
SN74HC4066PWR	Texas Instruments	SPST	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	4	4	CMOS	30 kHz	GULL WING			4.5 V	2/6	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	6 V	1.2 mm		4.4 mm	Not Qualified	NO	42 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	36 ns	150 ohm	40 ns		5 mm
FSUSB74MPX	Onsemi	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N16		1	4.4 V	.8 mm		3 mm			40 dB	2.5 V				e4		30	260	400000 ns	9 ohm	80 ns	.5 ohm	3 mm
TS5A23166DCURE4	Texas Instruments	SPST	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8	SEPARATE OUTPUT		5.5 V	.9 mm		2 mm	Not Qualified	NO/NC	62 dB	1.65 V					BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	18 ns	3.9 ohm	15.5 ns	.04 ohm	2.3 mm
TS5A3166DCKRG4	Texas Instruments	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0008 mA	1	1		200 kHz	GULL WING			1.8 V	1.8/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NO	62 dB	1.65 V		-.5 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	18 ns	3.9 ohm	15.5 ns		2 mm	7 V
FSA221L10X	Onsemi	DPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	2			NO LEAD			3.3 V	3/4.2,5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	3.6 V	.55 mm		1.6 mm	Not Qualified		37 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	10000 ns	5 ohm	10000 ns	.4 ohm	2.1 mm
MAX4564EUA	Maxim Integrated	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-6 V	-5 V	5 V	+-5,3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	6 V	1.1 mm		3 mm	Not Qualified	NC	77 dB	2 V			-2 V	e0	BREAK-BEFORE-MAKE	20	240	60 ns	60 ohm	40 ns	.75 ohm	3 mm
MAX4564EUA+	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-6 V	-5 V	5 V	+-5,3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	6 V	1.1 mm		3 mm	Not Qualified	NC	77 dB	2 V			-2 V	e3	BREAK-BEFORE-MAKE	30	260	60 ns	60 ohm	40 ns	.75 ohm	3 mm
TS5A3159ADBVR	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1		100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	1.95 V	1.45 mm		1.6 mm	Not Qualified		64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	75 ns	2.5 ohm	50 ns	.15 ohm	2.9 mm	5.5 V
ADG452BRUZ	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.2 mm		4.4 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	5 mm
MPC506AU/1KG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	16	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2		2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB					e4	BREAK-BEFORE-MAKE	30	260	500 ns	1500 ohm	500 ns		17.9 mm
ADG442BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO	60 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	110 ns	70 ohm	60 ns	1 ohm	9.9 mm
ADG412BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		9.9 mm
CD4066BCM	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			5 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G14			15 V	1.753 mm		3.899 mm				3 V								125 ns	1050 ohm	125 ns	10 ohm	8.6235 mm
HEF4051BT,652	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	8	CMOS		GULL WING		0 V	15 V	5/15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16		1	15 V	1.75 mm	.01 A	3.9 mm	Not Qualified		50 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	80 ns	175 ohm	230 ns	5 ohm	9.9 mm
TPS2052CDGN	Texas Instruments	SPST	INDUSTRIAL	8	HTSSOP	SQUARE	YES	PLASTIC/EPOXY	.12 mA	1	1			GULL WING			5 V		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	COMMON OUTPUT	2	5.5 V	1.1 mm		3 mm				4.5 V				e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	2400000 ns	.095 ohm	3250000 ns		3 mm
ADG452BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	220 ns	12 ohm	140 ns	.3 ohm	9.9 mm
HEF4066BT,653	NXP Semiconductors	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		0 V	15 V	5/15	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NO	50 dB					e4		30	260	30 ns	175 ohm	140 ns	5 ohm	8.65 mm
MAX4567EEE	Maxim Integrated	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	6 V	1.73 mm		3.9 mm	Not Qualified		83 dB	2.7 V	SPDT		-2.7 V	e0	BREAK-BEFORE-MAKE	20	240	150 ns	60 ohm	100 ns	1 ohm	4.89 mm
MAX4567EEE+	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.73 mm		3.9 mm	Not Qualified		83 dB	2.7 V	SPDT		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	60 ohm	100 ns	1 ohm	4.89 mm
TS3A4751PWRG4	Texas Instruments	SPST	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	4	4	CMOS	125 kHz	GULL WING			1.8 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	3.6 V	1.2 mm		4.4 mm	Not Qualified	NO	61 dB	1.6 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	20 ns	2 ohm	12 ns	.09 ohm	5 mm	3.6 V
TS5A4624DCKR	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	1		90 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		63 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	70 ns	3.3 ohm	15 ns	.15 ohm	2 mm	6.5 V
ADG714BRUZ-REEL7	Analog Devices	SPST	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	25 mA	8	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G24	SEPARATE OUTPUT	1	2.75 V	1.2 mm		4.4 mm	Not Qualified	NO	60 dB	2.25 V	ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY	0 V	-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	32 ns	4.5 ohm	18 ns	.4 ohm	7.8 mm	2.5 V
TS5A3159AYZPR	Texas Instruments	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.0001 mA	1	1		100 kHz	BALL			1.8 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-XBGA-B6	SEPARATE OUTPUT	1	1.95 V	.5 mm		.9 mm	Not Qualified		64 dB	1.65 V		0 V		e1	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	75 ns	2.5 ohm	50 ns	.15 ohm	1.4 mm	5.5 V
DG409DY	Vishay Intertechnology	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	2	4	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16			20 V	1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB	5 V			-5 V	e0	BREAK-BEFORE-MAKE			150 ns	100 ohm	150 ns	15 ohm	9.9 mm
DG409DY+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	2	4	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	1.5 ohm	9.9 mm
ADG419BR-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	16.5 V	1.09 mm		3 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		3 mm
ADG721BRMZ-REEL7	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	24 ns	10 ohm	11 ns	.3 ohm	3 mm
MAX4999ETJ+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED	.005 mA	1	8	CMOS		NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32		1	3.6 V	.8 mm	.06 A	5 mm	Not Qualified		27 dB	3 V				e3		30	260		12 ohm		.8 ohm	5 mm
PCA9546ABS,118	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	100 mA	1	4			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1	3.6 V	1 mm		4 mm				2.3 V	ALSO OPERATES WITH 4.5 TO 5.5V SUPPLY			e4		30	260	.3 ns	55 ohm	.3 ns		4 mm
TS3USB30EDGSR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	2		900 kHz	GULL WING			3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	4.3 V	1.1 mm		3 mm	Not Qualified	NC	40 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	30 ns	10 ohm	25 ns	.35 ohm	3 mm	4.3 V

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.