INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG619BRTZ-500RL7	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.45 mm	.05 A	1.6 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e4	BREAK-BEFORE-MAKE		260	120 ns	6.5 ohm	75 ns	.7 ohm	2.9 mm
ADG704BRM-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.03 A	3 mm	Not Qualified		60 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE		240	24 ns	8 ohm	16 ns	.1 ohm	3 mm
FSA3200UMX	Onsemi	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2					NO LEAD				3/4	CHIP CARRIER	LCC16,.07X.1,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260	600 ns	6.5 ohm
HEF4067BP	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	24	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.6 mA	1	16	CMOS			THROUGH-HOLE			5 V	5/15	IN-LINE	DIP24,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN SILVER	DUAL	R-PDIP-T24			15 V	5.1 mm	.025 A	15.24 mm	Not Qualified		50 dB	3 V				e2		30	260	340 ns	2500 ohm	435 ns	25 ohm	31.7 mm
MAX14759ETA+T	Analog Devices	SPST	INDUSTRIAL	8	HVSON	SQUARE	YES	PLASTIC/EPOXY		1	1	BICMOS			NO LEAD			5 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N8		1	5.5 V	.8 mm		3 mm			77 dB	3 V				e3		30	260	300000 ns	1 ohm	1000000 ns	.0024 ohm	3 mm
MAX398EEE-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS			GULL WING	-8 V	-5 V	5 V	+-3/+-8/3/15	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	8 V	1.75 mm	.03 A	3.9 mm	Not Qualified		75 dB	3 V	ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY		-3 V	e0	BREAK-BEFORE-MAKE			150 ns	100 ohm	150 ns	6 ohm	4.89 mm
MAX398EEE+T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS			GULL WING	-8 V	-5 V	5 V	+-3/+-8/3/15	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	8 V	1.75 mm	.03 A	3.9 mm	Not Qualified		75 dB	3 V			-3 V	e3	BREAK-BEFORE-MAKE	30	260	250 ns	100 ohm	200 ns	6 ohm	4.89 mm
MAX4659EUA	Maxim Integrated	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-20 V	-15 V	15 V	9/40/+-4.5/+-20	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	20 V	1.1 mm		3 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE		245	150 ns	25 ohm	150 ns	.4 ohm	3 mm
MAX4659EUA+	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS			GULL WING	-20 V	-15 V	15 V	9/40/+-4.5/+-20	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	20 V	1.1 mm		3 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	25 ohm	150 ns	.4 ohm	3 mm
MM74HC4053N	National Semiconductor	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.08 mA	3	1	CMOS			THROUGH-HOLE		-6 V	6 V	2/6,GND/-6	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16				5.08 mm	.025 A	7.62 mm	Not Qualified		44 dB					e0	BREAK-BEFORE-MAKE			41 ns	100 ohm	32 ns	5 ohm	19.304 mm
CBTL04083ABS,558	NXP Semiconductors	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	42	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY	5 mA	4	2				NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC42,.14X.35,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		QUAD	R-PQCC-N42		2					Not Qualified									30	260
SY58023UMG	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	130 mA	1	2				NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N16	SEPARATE OUTPUT	2	3.6 V	.9 mm		3 mm	Not Qualified			2.375 V	3.3V NOMINAL ALSO AVAILABLE			e4		40	260					3 mm
TS5A3159DCKT	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1			100 kHz	GULL WING			1.8 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		63 dB	1.65 V	2-CHANNEL MUX/DEMUX	0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	95 ns	3.2 ohm	70 ns	.7 ohm	2 mm	5.5 V
XHD3SS3212RKSTQ1	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	1		AEC-Q100		NO LEAD					CHIP CARRIER, VERY THIN PROFILE			.5 mm	105 Cel	-40 Cel		QUAD	R-PQCC-N20				1 mm		2.5 mm																4.5 mm
ADG1313YRUZ	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified		80 dB	13.5 V			-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns	200 ohm	60 ns	5 ohm	5 mm
ADG509FBRN	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	2	4	CMOS			GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e0	BREAK-BEFORE-MAKE	30	240	300 ns	390 ohm	150 ns	8.1 ohm	9.9 mm
ADG936BRUZ-R	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		36 dB	1.65 V				e3			260	14 ns		13 ns		6.5 mm
DG211BDY-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-22 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	22 V	1.75 mm		3.9 mm	Not Qualified	NC	90 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	85 ohm	200 ns	2 ohm	9.9 mm
DG406DN-T1-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS			J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.5062 mm	Not Qualified		69 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	5 ohm	11.5062 mm
DG406DYZ	Renesas Electronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	16	CMOS			GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		3		2.65 mm		7.5 mm					ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY AND 12V ANALOG INPUT VOLTAGE			e3		30	260	200 ns	100 ohm	150 ns		17.9 mm
ISL43144IVZ	Renesas Electronics	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-6 V	-5 V	5 V	+-2/+-6/2/12	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	6 V	1.2 mm		4.4 mm	Not Qualified	NO	71 dB	2 V	ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY		-2 V	e3	BREAK-BEFORE-MAKE	30	260	65 ns	25 ohm	50 ns	.5 ohm	5 mm
ISL84467IRTZ-T	Renesas Electronics	SPDT	INDUSTRIAL	16	VQCCN	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS			NO LEAD			1.8 V	1.8/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16	SEPARATE OUTPUT	2	4.5 V	.8 mm		3 mm	Not Qualified		65 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260		.9 ohm			3 mm
NLAS4717MR2G	Onsemi	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING			3 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	75 dB	1.8 V				e3	BREAK-BEFORE-MAKE	40	260	30 ns	4.5 ohm	40 ns	.1 ohm	3 mm
SN74HC4066DRE4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	4	1	CMOS		30 kHz	GULL WING			4.5 V	2/6	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	6 V	1.75 mm		3.905 mm	Not Qualified	NO	42 dB	2 V				e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	36 ns	85 ohm	40 ns		8.65 mm
SN74LVC2G66DCTRE4	Texas Instruments	SPST	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.015 mA	2	2	CMOS		300 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.3 mm		2.8 mm	Not Qualified	NO	42 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	5.6 ns	30 ohm	6.9 ns	5 ohm	2.95 mm	5.5 V
TS3A5018DBQRE4	Texas Instruments	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1				GULL WING			2.5 V	2.5/3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	2	3.6 V	1.75 mm		3.9 mm	Not Qualified	NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10.5 ns	20 ohm	9 ns	.4 ohm	4.9 mm
TS3A5018DBQRG4	Texas Instruments	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	4	4			300 kHz	GULL WING			2.5 V	2.5/3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	2	3.6 V	1.75 mm	.1 A	3.9 mm	Not Qualified	NO/NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10.5 ns	22 ohm	9 ns	.4 ohm	4.9 mm
TS3A5018PWRE4	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	4	4			300 kHz	GULL WING			2.5 V	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	.1 A	4.4 mm	Not Qualified	NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10.5 ns	22 ohm	9 ns	.4 ohm	5 mm
TS3DV520ERUAR	Texas Instruments	AUDIO/VIDEO SWITCH	INDUSTRIAL	42	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	10				NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	R-PQCC-N42	SEPARATE OUTPUT	1	3.6 V	.8 mm		3.5 mm	Not Qualified	NO	39 dB	3 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	15 ns	6 ohm	9 ns	.4 ohm	9 mm	5.5 V
TS3L501ERUAR	Texas Instruments	SPDT	INDUSTRIAL	42	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	8	11			600 kHz	NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N42	SEPARATE OUTPUT	2	3.6 V	.8 mm	.128 A	3.5 mm	Not Qualified		37 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	.5 ns	8 ohm	.9 ns	1.5 ohm	9 mm	5.5 V
TS5A3357DCUR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1			334 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	.9 mm		2 mm	Not Qualified		81 dB	1.65 V		0 V		e3	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	34 ns	50 ohm	14.5 ns	.3 ohm	2.3 mm	5.5 V
ADG211AKRZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING		-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NC	80 dB					e3	BREAK-BEFORE-MAKE	30	260	600 ns	115 ohm	450 ns		9.9 mm
ADG711BRU	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE	30	240	20 ns	8 ohm	12 ns	.1 ohm	5 mm
FSA1156L6X	Onsemi	SPST	INDUSTRIAL	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS			NO LEAD			2.7 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD	DUAL	R-PDSO-N6		1	5.5 V	.55 mm		1 mm	Not Qualified	NO		1.65 V				e4		30	260	40 ns	2.1 ohm		.6 ohm	1.45 mm
FSA5157L6X	Onsemi	SPDT	INDUSTRIAL	6	HVSON	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS			NO LEAD			2.3 V	1.8/4	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-XDSO-N6	SEPARATE OUTPUT	1	4.3 V	.55 mm		1 mm	Not Qualified		75 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	65 ns	.8 ohm	40 ns	.12 ohm	1.45 mm
PCA9546AD,112	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	100 mA	1	4				GULL WING			2.5 V		SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm		3.9 mm				2.3 V	ALSO OPERATES WITH 4.5 TO 5.5V SUPPLY					30	260	.3 ns	55 ohm	.3 ns		9.9 mm
SN74HC4066D	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	4	4	CMOS		30 kHz	GULL WING			4.5 V	2/6	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	6 V	1.75 mm		3.905 mm	Not Qualified	NO	42 dB	2 V				e4	MAKE-BEFORE-BREAK	30	260	36 ns	150 ohm	40 ns		8.65 mm
TS3A5018PWRG4	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1				GULL WING			2.5 V	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	48 dB	2.3 V				e4	BREAK-BEFORE-MAKE	30	260	10.5 ns	20 ohm	9 ns	.4 ohm	5 mm
TS5A3159ADCKT	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1			100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	1.95 V	1.1 mm		1.25 mm	Not Qualified		64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	75 ns	2.5 ohm	50 ns	.15 ohm	2 mm	5.5 V
74LVC1G3157DCKRG4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA	1	1	CMOS		340 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	57 dB	1.65 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	14 ns	30 ohm	7.5 ns	.1 ohm	2 mm
ADG506AKP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS			J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.51 mm	.02 A	11.506 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE	30	225	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
ADG622BRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS			GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
DG442DY-T	Maxim Integrated	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO	60 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			250 ns	85 ohm	120 ns	4 ohm	9.9 mm
DG442DY+T	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO	60 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	250 ns	85 ohm	170 ns	4 ohm	9.9 mm
SN74LV4052ADRE4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	1	2	CMOS			GULL WING			2.5 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16			5.5 V	1.75 mm	.05 A	3.9 mm	Not Qualified		45 dB	2 V						NOT SPECIFIED	NOT SPECIFIED	35 ns	180 ohm	35 ns	1.5 ohm	9.9 mm
TPS2065CDBVR-2	Texas Instruments	SPST	INDUSTRIAL		LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0002 mA						GULL WING					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	COMMON OUTPUT	2		1.45 mm		1.6 mm						0 V		e4	MAKE-BEFORE-BREAK	30	260					2.9 mm	5.5 V
TS3A27518EIPWRQ1	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0012 mA	1	6			240 kHz	GULL WING			3.3 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	SEPARATE OUTPUT	3	3.6 V	1.2 mm	.05 A	4.4 mm	Not Qualified	NO	60 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	56.7 ns	16.3 ohm	35.2 ns	5.5 ohm	7.8 mm	3.6 V
AD8108ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	8	BIPOLAR			GULL WING	-5.5 V	-5 V	5 V	5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm		12 mm	Not Qualified		93 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns				12 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.