INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
NLAS4717FCT1G	Onsemi	SPDT	INDUSTRIAL	10	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		BALL			3 V	2/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA10,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-PBGA-B10	SEPARATE OUTPUT	1	5.5 V	.65 mm		1.465 mm	Not Qualified	NC	75 dB	1.8 V				e1	BREAK-BEFORE-MAKE	40	260	30 ns	4.5 ohm	40 ns	.1 ohm	1.965 mm
PI3LVD1012BE	Pericom Semiconductor	AUDIO/VIDEO SWITCH	INDUSTRIAL	80	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	10			GULL WING			3.3 V		SMALL OUTLINE, SHRINK PITCH			.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G80			3.63 V	2 mm		3.9 mm	Not Qualified		42 dB	2.97 V								15 ns		9 ns	.2 ohm	20.5 mm
PI3PCIE3412AZLEX	Diodes Incorporated	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	40	HVQCCN	RECTANGULAR	YES	UNSPECIFIED	1 mA	2	4			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.12X25,16		.4 mm	85 Cel	-40 Cel		QUAD	R-XQCC-N40	SEPARATE OUTPUT		3.6 V	.8 mm		3 mm		NO	20 dB	3 V						NOT SPECIFIED	NOT SPECIFIED	25 ns		25 ns		6 mm	1.6 V
SN74LV4052APWE4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	2	CMOS	50 kHz	GULL WING			2.5 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	35 ns	225 ohm	35 ns	1.5 ohm	5 mm	5.5 V
SN74LV4052APWG4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	1	2	CMOS	50 kHz	GULL WING			2.5 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	35 ns	225 ohm	35 ns	1.5 ohm	5 mm	5.5 V
SN74LV4066APWT	Texas Instruments	SPST	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA	4	4	CMOS	50 kHz	GULL WING			2.3 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO	40 dB	2 V		2 V		e4	MAKE-BEFORE-BREAK	30	260	25 ns	180 ohm	25 ns	6 ohm	5 mm	5.5 V
SN74LVC1G66DCKTG4	Texas Instruments	SPDT	INDUSTRIAL	5	LSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1			GULL WING			1.8 V		SMALL OUTLINE, LOW PROFILE	TSSOP5,.08		.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5		1	5.5 V	1.1 mm	.1 A	1.25 mm	Not Qualified	NC	58 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	12 ns	30 ohm	10 ns	12 ohm	2 mm
SN74LVC2G53DCURE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	2	CMOS		GULL WING			2.3 V	3.3	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	Multiplexers or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8			5.5 V	.9 mm	.1 A	2 mm	Not Qualified		50 dB	1.65 V						NOT SPECIFIED	NOT SPECIFIED	7.2 ns	20 ohm	7.9 ns	5 ohm	2.3 mm
TPS2041CDBVT	Texas Instruments	SPST	INDUSTRIAL		LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.00009 mA					GULL WING					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	COMMON OUTPUT	2		1.2 mm		1.6 mm								e4	MAKE-BEFORE-BREAK	30	260					2.9 mm
TS12A44513DR	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0002 mA	4	4	CMOS	530 kHz	GULL WING			3 V	3/12	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	12 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	94 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	175 ns	40 ohm	120 ns	3.5 ohm	8.65 mm
TS3A24157DGSR	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	2		50 kHz	GULL WING			1.8 V	1.8/3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	1.95 V	1.1 mm	.1 A	3 mm	Not Qualified		73 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	80 ns	1 ohm	40 ns	.15 ohm	3 mm	3.6 V
TS3A24157DGSRG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1			GULL WING			1.8 V	1.8/3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10		1	1.95 V	1.1 mm	.1 A	3 mm	Not Qualified		73 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	80 ns	1 ohm	40 ns	.15 ohm	3 mm
TS3A4741DCNR	Texas Instruments	SPST	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.00075 mA	2	2	CMOS	125 kHz	GULL WING			1.8 V	1.8/3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	3.6 V	1.45 mm		1.6 mm	Not Qualified	NO	61 dB	1.6 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	20 ns	2 ohm	12 ns	.09 ohm	2.9 mm	3.6 V
TS3A4751RUCR	Texas Instruments	SPST	INDUSTRIAL	14	VQCCN	SQUARE	YES	PLASTIC/EPOXY	.01 mA	4	4	CMOS	125 kHz	NO LEAD			1.8 V	1.8/3	CHIP CARRIER, VERY THIN PROFILE	LCC14,.08SQ,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N14	SEPARATE OUTPUT	1	3.6 V	.4 mm		2 mm	Not Qualified	NO	61 dB	1.6 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	20 ns	2 ohm	12 ns	.09 ohm	2 mm	3.6 V
TS3L301DGGR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	8		900 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	SEPARATE OUTPUT	1	3.6 V	1.2 mm	.128 A	6.1 mm	Not Qualified		39 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	11.5 ns	8 ohm	8.5 ns	1.2 ohm	12.5 mm	5.5 V
TS3L301DGGRE4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	8		900 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	SEPARATE OUTPUT	1	3.6 V	1.2 mm	.128 A	6.1 mm	Not Qualified		39 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	11.5 ns	8 ohm	8.5 ns	.2 ohm	12.5 mm	5.5 V
TS3L301DGGRG4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.6 mA	1	8		900 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	SEPARATE OUTPUT	1	3.6 V	1.2 mm	.128 A	6.1 mm	Not Qualified		39 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	11.5 ns	8 ohm	8.5 ns	.2 ohm	12.5 mm	5.5 V
TS3USB31RSER	Texas Instruments	DPDT	INDUSTRIAL	8	VQCCN	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	2		1220 kHz	NO LEAD			3.3 V		CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N8	SEPARATE OUTPUT	1	4.3 V	.6 mm		1.5 mm	Not Qualified	NC	30 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	30 ns	10 ohm	25 ns	.35 ohm	1.5 mm	4.3 V
TS5A22364DGSR	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.005 mA	2	2		18.3 kHz	GULL WING			2.5 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	70 dB	2.3 V		-3.2 V		e4	BREAK-BEFORE-MAKE	30	260	120 ns	1.3 ohm	70 ns	.3 ohm	3 mm	5.5 V
TS5A22364YZPR	Texas Instruments	SPDT	INDUSTRIAL	10	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY	.005 mA	2	2		18.3 kHz	BALL			2.5 V	2.5/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA10,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B10	SEPARATE OUTPUT	1	5.5 V	.5 mm		1.37 mm	Not Qualified	NO/NC	70 dB	2.3 V		-3.2 V		e1	BREAK-BEFORE-MAKE	30	260	120 ns	1.3 ohm	70 ns	.3 ohm	1.87 mm	5.5 V
TS5A4594DCKR	Texas Instruments	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1		450 kHz	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	COMMON OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NO	82 dB	2 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	35 ns	16 ohm	30 ns		2 mm	5.5 V
74VHC4053MTCX	Fairchild Semiconductor	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	2	CMOS		GULL WING	-6 V	-4.5 V	4.5 V	2/6,GND/-6	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	6 V	1.2 mm	.025 A	4.4 mm	Not Qualified		44 dB	2 V			0 V	e3	BREAK-BEFORE-MAKE		260	46 ns	120 ohm	37 ns	5 ohm	5 mm
AD8174ARZ-R7	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	13 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14		1		1.75 mm		3.9 mm	Not Qualified							e3		30	260	17 ns				8.65 mm
ADG201HSKR	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE		-13.5 V	e0	BREAK-BEFORE-MAKE		240	50 ns	75 ohm	50 ns	1.5 ohm	9.9 mm
ADG201HSKR-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE		-13.5 V	e0	BREAK-BEFORE-MAKE		240	50 ns	75 ohm	50 ns	1.5 ohm	9.9 mm
ADG212AKRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NO	80 dB					e3	BREAK-BEFORE-MAKE	30	260	600 ns	115 ohm	450 ns		9.9 mm
ADG333ABRS	Analog Devices	SPDT	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.35 mA	4	1	BICMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1		2 mm		5.3 mm	Not Qualified		72 dB					e0	BREAK-BEFORE-MAKE		240	175 ns	45 ohm	145 ns	4 ohm	7.2 mm
ADG333ABRS-REEL	Analog Devices	SPDT	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.35 mA	4	1	BICMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1		2 mm		5.3 mm	Not Qualified		72 dB					e0	BREAK-BEFORE-MAKE		240	175 ns	45 ohm	145 ns	4 ohm	7.2 mm
ADG413BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		9.9 mm
ADG426BNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.5 mA	1	16	BICMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T28			16.5 V	6.35 mm	.02 A	15.24 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE			150 ns	80 ohm	150 ns	4 ohm	37.4 mm
ADG433BN	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		16.5 V	5.33 mm		7.62 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE			165 ns	24 ohm	130 ns	.85 ohm	20.13 mm
ADG444BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	60 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	110 ns	70 ohm	60 ns	1 ohm	9.9 mm
ADG452BN	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-20 V	-5 V	5 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		20 V	5.33 mm		7.62 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-4.5 V	e0	BREAK-BEFORE-MAKE			220 ns	12 ohm	140 ns	.3 ohm	20.07 mm
ADG506AKP-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel		QUAD	S-PQCC-J28			16.5 V	4.51 mm		11.506 mm			68 dB	10.8 V			-10.8 V						450 ohm		5 ohm	11.506 mm
ADG506AKR	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G28		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE	30	240	300 ns	450 ohm	300 ns	22.5 ohm	17.9 mm
ADG507AKR-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G28		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE	30	240	300 ns	450 ohm	300 ns	22.5 ohm	17.9 mm
ADG509FBRWZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING	-16.5 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	390 ohm	150 ns	8.1 ohm	10.3 mm
ADG529AKRW	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	18	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP18,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G18		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	5 ohm	11.55 mm
ADG608BRUZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	1	8	BICMOS		GULL WING		-5 V	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.2 mm		4.4 mm	Not Qualified		85 dB		OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE			e3		30	260	75 ns	30 ohm	75 ns	2 ohm	5 mm
ADG609BRU-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.02 A	4.4 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE		-4.5 V	e0	BREAK-BEFORE-MAKE	30	240	75 ns	30 ohm	75 ns	2 ohm	5 mm
ADG609BRUZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS		GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.02 A	4.4 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	5 mm
ADG609BRUZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	1	4	BICMOS		GULL WING		-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.2 mm	.02 A	4.4 mm	Not Qualified		85 dB		OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE			e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	5 mm
ADG701BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	20 ns	5 ohm	13 ns		3 mm
ADG707BRUZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	2.75 V	1.2 mm	.03 A	4.4 mm	Not Qualified		80 dB	2.25 V	CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES		-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	50 ns	4.5 ohm	26 ns	.3 ohm	9.7 mm
ADG713BRUZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	12 ns	.1 ohm	5 mm
ADG723BRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG725BSU	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	FLATPACK, THIN PROFILE, FINE PITCH	QFP48,.35SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G48		3	2.75 V	1.2 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE		240	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm
ADG725BSU-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	FLATPACK, THIN PROFILE, FINE PITCH	QFP48,.35SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G48		3	2.75 V	1.2 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE		240	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.