INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
NX3DV642GU,115	NXP Semiconductors	3PDT	INDUSTRIAL	24	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2				NO LEAD				3/4	CHIP CARRIER	LCC24,.1X.14,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		QUAD	R-PQCC-N24	SEPARATE OUTPUT	1					Not Qualified								BREAK-BEFORE-MAKE	30	260		14 ohm
PI3V312QE	Diodes Incorporated	VIDEO MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.8 mA	4	2	CMOS		GULL WING			3.3 V	2.5/3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	3.6 V	1.75 mm	.12 A	3.9 mm	Not Qualified		60 dB	3 V				e3				9 ns	8 ohm	9 ns		4.9 mm
PI3V512QE	Diodes Incorporated	AUDIO/VIDEO SWITCH	INDUSTRIAL	24	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.8 mA	1	5	CMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G24		1	3.6 V	1.75 mm	.12 A	3.9 mm	Not Qualified		70 dB	3 V				e3					8 ohm		.9 ohm	8.65 mm
SN74LV4052ATPWREP	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	1	2	CMOS	50 kHz	GULL WING			3 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	25 ns	190 ohm	25 ns	30 ohm	5 mm	5.5 V
SN74LV4053ADGVR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	3	3	CMOS	50 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	3.6 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	225 ohm	28 ns	2 ohm	4.4 mm	5.5 V
SN74LV4053APW	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA	3	3	CMOS	50 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	225 ohm	28 ns	2 ohm	5 mm	5.5 V
SN74LV4066ARGYR	Texas Instruments	SPST	INDUSTRIAL	14	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.035 mA	4	4	CMOS	50 kHz	NO LEAD			2.3 V	2.5/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14/18,.14SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N14	SEPARATE OUTPUT	2	5.5 V	1 mm		3.5 mm	Not Qualified	NO	40 dB	2 V		2 V		e4	MAKE-BEFORE-BREAK	30	260	25 ns	180 ohm	25 ns	6 ohm	3.5 mm	5.5 V
TS3DV421DGVR	Texas Instruments	AUDIO/VIDEO SWITCH	INDUSTRIAL	48	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.45 mA	1	8			GULL WING			1.8 V	1.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.25,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	SEPARATE OUTPUT	1	2.1 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	50 dB	1.5 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	9 ns	20 ohm	5 ns		9.7 mm	3.6 V
TS3DV520ERHURG4	Texas Instruments	AUDIO/VIDEO SWITCH	INDUSTRIAL	56	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	10	CMOS		NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.19X.43,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N56	SEPARATE OUTPUT	2	3.6 V	.8 mm		5 mm	Not Qualified	NO	39 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	15 ns	6 ohm	9 ns	.4 ohm	11 mm
TS3L110DBQRG4	Texas Instruments	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	4	1		500 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	SEPARATE OUTPUT	2	3.6 V	1.75 mm	.128 A	3.9 mm	Not Qualified	NO	28 dB	3 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	7 ns	8 ohm	5 ns	.9 ohm	4.9 mm
TS3L110RGYRG4	Texas Instruments	SPDT	INDUSTRIAL	16	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	4	1			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16/20,.14X.16,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	SEPARATE OUTPUT	2	3.6 V	1 mm	.128 A	3.5 mm	Not Qualified	NO	28 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	7 ns	8 ohm	5 ns	.9 ohm	4 mm
TS3USB3200RSVR	Texas Instruments	DPDT	INDUSTRIAL	16	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.07 mA	1	2		5500 kHz	NO LEAD			3.3 V		CHIP CARRIER, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	SEPARATE OUTPUT	1	4.3 V	.55 mm		1.8 mm			37 dB	2.7 V		0 V		e4		30	260	400 ns		400 ns	.4 ohm	2.6 mm	3.6 V
TS5A23160DGSRE4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified		64 dB	1.65 V				e4	MAKE-BEFORE-BREAK	30	260	14.5 ns	2.5 ohm	21.5 ns	.15 ohm	3 mm
TS5A23160DGSRG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	1		100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	14.5 ns	2.5 ohm	21.5 ns	.15 ohm	3 mm	5.5 V
TS5A3167DBVR	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1		200 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	19 ns	3.4 ohm	17.5 ns		2.9 mm	5.5 V
TS5A3167DCKR	Texas Instruments	SPST	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1		200 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	19 ns	3.4 ohm	17.5 ns		2 mm	5.5 V
TS5A63157DBVR	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.00075 mA	1	1		371 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified		60 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	24 ns	45 ohm	12 ns	.1 ohm	2.9 mm	5.5 V
AD8184ARZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	5.7 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14		1		1.75 mm		3.9 mm	Not Qualified		115 dB					e3		30	260					8.65 mm
ADG201HSKRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	50 ns	75 ohm	50 ns	1.5 ohm	9.9 mm
ADG201HSKRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm		3.9 mm	Not Qualified		72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE		-13.5 V	e3		30	260	50 ns	50 ohm	50 ns	3 ohm	9.9 mm
ADG211AKRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NC	80 dB					e3	BREAK-BEFORE-MAKE	30	260	600 ns	115 ohm	450 ns		9.9 mm
ADG408BR	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e0	BREAK-BEFORE-MAKE		240	150 ns	100 ohm	150 ns	15 ohm	9.9 mm
ADG413BRUZ	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		5 mm
ADG413BRUZ-500RL7	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		5 mm
ADG413BRUZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		5 mm
ADG413BRUZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NO/NC	68 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	145 ns		5 mm
ADG431BRZ	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	165 ns	24 ohm	130 ns	.85 ohm	9.9 mm
ADG433BNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	5.33 mm		7.62 mm	Not Qualified		68 dB	13.5 V	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e3				165 ns	24 ohm	130 ns	.85 ohm	20.13 mm
ADG506AKPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.51 mm		11.5062 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3			260	300 ns	450 ohm	300 ns	22.5 ohm	11.506 mm
ADG508FBRUZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm	.02 A	4.4 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	390 ohm	150 ns	8.1 ohm	5 mm
ADG509FBRUZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING	-16.5 V	-15 V	15 V	+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm	.02 A	4.4 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	390 ohm	150 ns	8.1 ohm	5 mm
ADG622BRMZ-REEL7	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG623BRMZ	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG623BRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG623BRMZ-REEL7	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG701BRTZ-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE	40	260	20 ns	5 ohm	13 ns		2.9 mm
ADG721ACPZ-REEL7	Analog Devices	SPST	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N8	SEPARATE OUTPUT	1	5.5 V	.8 mm		2 mm	Not Qualified	NO	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG725BCPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	HVQCCN	SQUARE	YES	UNSPECIFIED		1	16	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N48		3	2.75 V	1 mm		7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e3			260	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm
ADG726BSUZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY	.02 mA	1	16	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G48		3	2.75 V	1.2 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERTES WITH 1.8V TO 5.5V SINGLE SUPPLY		-2.25 V	e3	BREAK-BEFORE-MAKE		260	37 ns	5.5 ohm	26 ns	.3 ohm	7 mm
ADG728BRU-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexers or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	5.5 V	1.1 mm	.01 A	4.4 mm	Not Qualified		55 dB	2.7 V				e0	BREAK-BEFORE-MAKE	30	240	200 ns	11 ohm	180 ns	.4 ohm	5 mm
ADG772BCPZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED	.001 mA	2	1	CMOS		NO LEAD			3.3 V	3/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.05X.06,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10		1	3.6 V	.6 mm	.035 A	1.3 mm	Not Qualified		73 dB	2.7 V				e4	BREAK-BEFORE-MAKE	30	260	13.5 ns	8.8 ohm	10 ns	.04 ohm	1.6 mm
ADG787BRMZ-500RL7	Analog Devices	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	63 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	30 ns	5.75 ohm	7 ns	.07 ohm	3 mm
ADG787BRMZ-REEL	Analog Devices	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	63 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	30 ns	5.75 ohm	6 ns	.07 ohm	3 mm
ADG824BCPZ-REEL	Analog Devices	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			1.8 V	1.8/2.5/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.05X.06,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	3.6 V	.6 mm		1.3 mm	Not Qualified		71 dB	1.65 V				e3	BREAK-BEFORE-MAKE		260	19.3 ns	2.5 ohm	10.2 ns	.01 ohm	1.6 mm
ADG824BCPZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			1.8 V	1.8/2.5/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC10,.05X.06,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	3.6 V	.6 mm		1.3 mm	Not Qualified		71 dB	1.65 V				e4	BREAK-BEFORE-MAKE		260	19.3 ns	2.5 ohm	10.2 ns	.01 ohm	1.6 mm
ADV3202ASWZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	176	HLFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32			GULL WING	-2.75 V	-2.5 V	2.5 V	2.5	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP176,1.0SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G176	SEPARATE OUTPUT	3	2.75 V	1.6 mm		24 mm	Not Qualified		80 dB	2.25 V			-2.25 V	e3			260					24 mm
ADV3222ARZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	9 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1					Not Qualified							e3		30	260
ADV3222ARZ-R7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	9 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1					Not Qualified							e3		30	260

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.