INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG428BRZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	18	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.1 mA	1	8	CMOS	GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP18,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G18		1		2.65 mm	.03 A	7.5 mm	Not Qualified		75 dB				e3	BREAK-BEFORE-MAKE		260	150 ns	100 ohm	150 ns	10 ohm	11.55 mm
ADG444ABRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	60 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE		260	110 ns	70 ohm	60 ns	1 ohm	9.9 mm
ADG609BRZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	1	4	BICMOS	GULL WING	-5.5 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	9.9 mm
ADG609BRZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	1	4	BICMOS	GULL WING		-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		85 dB		OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE		e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	9.9 mm
ADG620BRMZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e3	MAKE-BEFORE-BREAK		260	65 ns	6.5 ohm	330 ns	.7 ohm	3 mm
ADG702BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	20 ns	5 ohm	13 ns		3 mm
ADG702BRTZ-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2.9 mm
ADG712BRU-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY		e0	BREAK-BEFORE-MAKE	30	240	20 ns	8 ohm	12 ns	.1 ohm	5 mm
ADG731BSU	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32	CMOS	GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	FLATPACK, THIN PROFILE, FINE PITCH	QFP48,.35SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G48		3	2.75 V	1.2 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY	-2.25 V	e0	BREAK-BEFORE-MAKE		240	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm
ADG739BRUZ-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS	GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm		4.4 mm	Not Qualified		75 dB	2.7 V			e3		30	260	70 ns	11 ohm	25 ns	.4 ohm	5 mm
DG2037DS-T1	Vishay Intertechnology	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE	TSSOP8,.1	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	SEPARATE OUTPUT		5.5 V				Not Qualified	NO		1.8 V			e0	BREAK-BEFORE-MAKE			35 ns	6 ohm	31 ns	.3 ohm
DG212BDY-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-22 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	22 V	1.75 mm		3.9 mm	Not Qualified	NO	90 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE			300 ns	85 ohm	200 ns	2 ohm	9.9 mm
DG403BDJ-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1		5.08 mm		7.62 mm	Not Qualified	NO/NC	72 dB				e3	BREAK-BEFORE-MAKE	30	260	150 ns	45 ohm	100 ns	3 ohm	20.13 mm
DG408DJ	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	2 mA	1	8	CMOS	THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T16		1	20 V	5.08 mm	.02 A	7.62 mm	Not Qualified		75 dB	5 V		-5 V		BREAK-BEFORE-MAKE			150 ns	100 ohm	150 ns	15 ohm	20.13 mm
DG408DJ+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	2 mA	1	8	CMOS	THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16		1	20 V	4.572 mm	.02 A	7.62 mm	Not Qualified		75 dB	5 V		-5 V	e3	BREAK-BEFORE-MAKE	30	260	225 ns	100 ohm	300 ns	1.5 ohm	19.175 mm
DG412FEUE-T	Maxim Integrated	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	20 V	1.1 mm		4.4 mm	Not Qualified		65 dB	4.5 V		-4.5 V	e0				175 ns	35 ohm	145 ns	.2 ohm	5 mm
DG412FEUE+T	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.1 mm		4.4 mm	Not Qualified		65 dB	4.5 V		-4.5 V	e3		30	260	175 ns	35 ohm	145 ns	.2 ohm	5 mm
DG419LDY-T1-E3	Vishay Intertechnology	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	BICMOS	GULL WING	-6 V	-5 V	5 V	+-3/+-6/3/12	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1	6 V	1.75 mm		3.9 mm	Not Qualified		71 dB	3 V	VIDEO APPLICATION	-3 V	e3	BREAK-BEFORE-MAKE			44 ns	18.5 ohm	33 ns		4.9 mm
DG448DV-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	20 V	1.1 mm		1.65 mm	Not Qualified	NO	72 dB	4.5 V	ALSO OPERATES WITH 7V TO 36V SINGLE SUPPLY	-4.5 V	e3	BREAK-BEFORE-MAKE			140 ns	25 ohm	110 ns		3.05 mm
DG451EQ-T1-E3	Vishay Intertechnology	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-16.5 V	-5 V	5 V	+-5/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified	NC		2.4 V	ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY		e3	BREAK-BEFORE-MAKE			256 ns	11 ohm	113 ns	.13 ohm	5 mm
DG508AEWE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS	GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	18 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	1500 ns	350 ohm	1000 ns	10.2 ohm	10.3 mm
DG508AEWE-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS	GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	18 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	4.5 V		-4.5 V	e0	BREAK-BEFORE-MAKE	20	240	1500 ns	450 ohm	1000 ns	27 ohm	10.3 mm
DG509ADY	Vishay Intertechnology	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2.4 mA	1	4	CMOS	GULL WING	-17 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16	COMMON OUTPUT		17 V	1.75 mm	.02 A	3.77 mm	Not Qualified	NO	68 dB				e0	BREAK-BEFORE-MAKE			1500 ns	450 ohm	1000 ns	27 ohm	9.9 mm	2.4 V
DG509ADY+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	4	CMOS	GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	18 V	1.75 mm	.02 A	3.9 mm	Not Qualified		68 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	1500 ns	450 ohm	1000 ns	27 ohm	9.9 mm
DS25CP104ATSQX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	40	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	190 mA	1			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N40	SEPARATE OUTPUT	3		.8 mm		6 mm	Not Qualified						e3	MAKE-BEFORE-BREAK	30	260	20000 ns				6 mm
FMS6501AMTC28X	Onsemi	AUDIO/VIDEO SWITCH	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY					GULL WING			5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2					Not Qualified						e4		30	260
FPF1203LUCX	Onsemi	SPST	INDUSTRIAL	4	VFBGA	SQUARE	YES	PLASTIC/EPOXY		1	1		BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B4		1	5.5 V	.539 mm		.76 mm				1.2 V			e1		30	260		65 ohm			.76 mm
FSA1208BQX	Onsemi	SPST	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	NO LEAD			2.3 V	2.5/4	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.1X.18,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N20	SEPARATE OUTPUT	1		.8 mm		2.5 mm	Not Qualified	NC					e4	BREAK-BEFORE-MAKE	30	260					4.5 mm
FSA2457UMX	Onsemi	DPDT	INDUSTRIAL	16	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	1		NO LEAD			3.3 V	3/3.3	CHIP CARRIER, VERY THIN PROFILE	LCC16,.07X.1,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N16	SEPARATE OUTPUT	1	3.6 V	.55 mm		1.8 mm	Not Qualified		45 dB	2.7 V			e4	BREAK-BEFORE-MAKE	30	260	7 ns	7 ohm	4 ns	.3 ohm	2.6 mm
FSA550BUCX	Onsemi	4PST	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	4		BALL				GND/3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12	SEPARATE OUTPUT	1	3 V	.625 mm		1.16 mm	Not Qualified	NC	90 dB	1.6 V			e1		30	260	120 ns	.8 ohm			1.56 mm
FSA553UCX	Onsemi	SPST	INDUSTRIAL	9	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	2		BALL					GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA9,3X3,16		.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B9	SEPARATE OUTPUT	1	3 V	.619 mm		1.21 mm		NC	82 dB	0 V			e1		30	260		.8 ohm		.01 ohm	1.38 mm
FSA642UMX	Onsemi	3PDT	INDUSTRIAL	24	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	3		NO LEAD			2.775 V	2.65/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC24,.1X.14,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel		QUAD	R-PQCC-N24	SEPARATE OUTPUT	1	4.3 V	.55 mm		2.5 mm	Not Qualified		35 dB	2.65 V				BREAK-BEFORE-MAKE	30	260	37 ns	14 ohm	27 ns	.65 ohm	3.4 mm
FSUSB11MTCX	Onsemi	SPDT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			2.7 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified		70 dB	1.65 V			e4	BREAK-BEFORE-MAKE	30	260	60 ns	4.5 ohm	20 ns	.07 ohm	5 mm
FSUSB23L10X	Onsemi	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	VQCCN	RECTANGULAR	YES	UNSPECIFIED		2	2		NO LEAD			3.3 V		CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBCC-N16			3.6 V	.55 mm		1.6 mm			30 dB	3 V							13 ns	10 ohm	11 ns	.3 ohm	2.1 mm
ISL54214IRTZ-T	Renesas Electronics	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	12	HQCCN	SQUARE	YES	UNSPECIFIED		2	3	CMOS	NO LEAD			3 V	3/3.3	CHIP CARRIER, HEAT SINK/SLUG	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N12		1	3.6 V			3 mm	Not Qualified		96 dB	2.7 V			e3	BREAK-BEFORE-MAKE				2.8 ohm		.04 ohm	3 mm
ISL54214IRUZ-T	Renesas Electronics	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	12	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS	NO LEAD			3 V		CHIP CARRIER, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	R-PQCC-N12		1	4.6 V	.55 mm		1.4 mm			96 dB	2.7 V			e4		30	260		2.8 ohm		.04 ohm	2.2 mm
MAX319ESA	Maxim Integrated	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.005 mA	1	1	CMOS	GULL WING		-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified		68 dB				e0	BREAK-BEFORE-MAKE	20	240	175 ns	35 ohm	175 ns	2 ohm	4.9 mm
MAX319ESA+	Analog Devices	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.005 mA	1	1	CMOS	GULL WING		-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified		68 dB				e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	175 ns	2 ohm	4.9 mm
MAX320EUA-T	Maxim Integrated	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING	-8 V	-5 V	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	8 V	1.11 mm		3 mm	Not Qualified		72 dB	2.7 V		-2.7 V	e0				150 ns	35 ohm	100 ns	.3 ohm	3 mm
MAX320EUA+T	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING	-8 V	-5 V	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	8 V	1.11 mm		3 mm	Not Qualified		72 dB	2.7 V		-2.7 V	e3		30	260	150 ns	35 ohm	100 ns	.3 ohm	3 mm
MAX4740HETE+	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	BICMOS	NO LEAD			3.3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	1 mm		3 mm	Not Qualified		64 dB	1.6 V			e3		30	260	70 ns	.9 ohm	55 ns	.06 ohm	3 mm
MAX9675ECQ+	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY		1		BICMOS	GULL WING				3/5/+-5	FLATPACK	TQFP100,.63SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3					Not Qualified						e3
MAX9675ECQ+T	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY		1		BICMOS	GULL WING				3/5/+-5	FLATPACK	TQFP100,.63SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		QUAD	S-PQFP-G100	SEPARATE OUTPUT						Not Qualified
MM74HC4053MTCX	Fairchild Semiconductor	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	2	CMOS	GULL WING	-6 V	-4.5 V	4.5 V	2/6,GND/-6	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	6 V	1.2 mm	.025 A	4.4 mm	Not Qualified		42 dB	2 V		0 V	e3	BREAK-BEFORE-MAKE			355 ns	230 ohm	290 ns	20 ohm	5 mm
MT8816AE1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	40	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	16	CMOS	THROUGH-HOLE		-7 V	5 V	5/12,GND/-7	IN-LINE	DIP40,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T40	SEPARATE OUTPUT		13.2 V	6.35 mm		15.24 mm	Not Qualified		95 dB	4.5 V	8 X 16 ARRAY		e3				100 ns	185 ohm		5 ohm	51.75 mm
MT8816AP	Microsemi	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND		-7 V	5 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J44			13.2 V	4.57 mm		16.585 mm	Not Qualified		95 dB	4.5 V	8 X 16 ARRAY		e0					185 ohm		5 ohm	16.585 mm
MT8816APR1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND		-7 V	5 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J44			13.2 V	4.57 mm		16.585 mm	Not Qualified		95 dB	4.5 V	8 X 16 ARRAY		e3					185 ohm		5 ohm	16.585 mm
NLAS8252MUTAG	Onsemi	DP3T	INDUSTRIAL	12	QCCN	RECTANGULAR	YES	PLASTIC/EPOXY		2			NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC12,.07X.08,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N12	SEPARATE OUTPUT	1					Not Qualified						e4	BREAK-BEFORE-MAKE		260	30 ns	6 ohm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.