48 Line Drivers & Receivers 790

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX9268GCM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		ISO 10605	280 mA	STANDARD	3.3 V		3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9218ETM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	VQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	CHIP CARRIER, VERY THIN PROFILE	LCC48,.24SQ,16		Line Driver or Receivers		3 V	.4 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified			1			e3	30	260	6 mm		0 ns
MAX9248GCM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		GENERAL PURPOSE	120 mA	STANDARD	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9218ECM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX9258AGCM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX9281GTM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE		PLASTIC/EPOXY	YES			CMOS	AEC-Q100			195 mA				1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9249GCM/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE		PLASTIC/EPOXY	YES	1.9 V	1	CMOS	AEC-Q100		ISO 10605	220 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V		1.8	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		Line Driver or Receivers		1.7 V	.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
MAX9278GGM/VY+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100		I2C	.3 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20				3 V	.5 mm	105 Cel		3-STATE	-40 Cel			QUAD	S-XQCC-N48		.8 mm	7 mm			TRUE	1		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm
MAX9218ECM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX9248ECM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	120 mA	STANDARD	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9250GCM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE		PLASTIC/EPOXY	YES			CMOS				89 mA		3.3 V		3.3	FLATPACK	QFP48,.35SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9217ECM+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE		STANDARD	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9250ECM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	120 mA	STANDARD	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX2832ETM+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	BICMOS			IEEE 802.11		DIFFERENTIAL	2.8 V			CHIP CARRIER					2.7 V	.5 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1	.8 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
MAX2831ETM+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	BICMOS			IEEE 802.11		DIFFERENTIAL	2.8 V			CHIP CARRIER					2.7 V	.5 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1	.8 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
74LVX161284MEAX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13	CMOS		44 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	85 Cel	3.3 V		-40 Cel	14	MATTE TIN	DUAL	R-PDSO-G48	1	2.74 mm	7.495 mm	Not Qualified		TRUE	13		NO	e3			15.875 mm		44 ns
74VHC161284MEA	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1	CMOS		30 ns	IEEE-1284	70 mA	SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH	SSOP48,.4			.0001 Amp	4.5 V	.635 mm	85 Cel			-40 Cel	19		DUAL	R-PDSO-G48		2.74 mm	7.5 mm		84 Amp		19		NO				15.875 mm		30 ns
74LVX161284MTD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13	CMOS		44 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel	3.15 V		-40 Cel	14	MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			13	CONTAINS EIGHT BIDIRECTIONAL DATA BUFFERS	NO	e3			12.5 mm		44 ns
74VHC161284MTDX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	13	CMOS		30 ns	IEEE 1284		SCHMITT TRIGGER	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.5 mm	85 Cel			-40 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			13		NO	e4	30	260	12.5 mm		30 ns
74LVX161284MTDX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13	CMOS		44 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel	3.15 V		-40 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			13	CONTAINS EIGHT BIDIRECTIONAL DATA BUFFERS	NO	e4	30	260	12.5 mm		44 ns
74VHC161284MEAX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	13	CMOS		30 ns	IEEE 1284		SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					4.5 V	.635 mm	85 Cel			-40 Cel	14	MATTE TIN	DUAL	R-PDSO-G48	1	2.74 mm	7.495 mm	Not Qualified			13		NO	e3			15.875 mm		30 ns
74LVX161284MEA	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13	CMOS		44 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	85 Cel	3.3 V		-40 Cel	14	MATTE TIN	DUAL	R-PDSO-G48	1	2.74 mm	7.495 mm	Not Qualified		TRUE	13		NO	e3			15.875 mm		44 ns
74VHC161284MTD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1	CMOS		30 ns	IEEE 1284	70 mA	SCHMITT TRIGGER	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20			.0001 Amp	4.5 V	.5 mm	85 Cel			-40 Cel	19		DUAL	R-PDSO-G48		1.2 mm	6.1 mm		84 Amp		19		NO				12.5 mm		30 ns
FIN1217MTDX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	3				EIA-644; TIA-644	66 mA	STANDARD	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified					YES	e4	30	260	12.5 mm
FIN1218MTDX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	3				EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G48		1.2 mm	6.1 mm				3		NO				12.5 mm
74LVC161284ATTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS		9 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel			-40 Cel	8		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified			8		NO				12.5 mm		9 ns
74LVC161284TTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS		9 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel			-40 Cel	8	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G48	3	1.2 mm	6.1 mm	Not Qualified			8		NO	e3	30	260	12.5 mm		9 ns
74LVCZ161284ATTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS		9 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel			-40 Cel	12	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified			13		NO	e4			12.5 mm		9 ns
5962F0153403V9A	STMicroelectronics	LINE DRIVER	MILITARY	NO LEAD	48	DIE	RECTANGULAR	300k Rad(Si)	UNSPECIFIED	YES	3.6 V	1		MIL-PRF-38535 Class V	1.5 ns	GENERAL PURPOSE	65 mA	STANDARD				UNCASED CHIP					3 V		125 Cel			-55 Cel	21		UPPER	R-XUUC-N48				Qualified					YES					.25 V
5962F0153503VYC	STMicroelectronics	LINE RECEIVER		FLAT	48	DFP	RECTANGULAR	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	3				EIA-644; TIA-644	65 mA		3.3 V			FLATPACK	FL48,.4,25				3 V	.635 mm	125 Cel			-55 Cel			DUAL	R-CDFP-F48		2.72 mm	9.65 mm	Qualified	2 Amp		3		YES		NOT SPECIFIED	NOT SPECIFIED	15.75 mm
5962F0153503VYX	STMicroelectronics	LINE RECEIVER	MILITARY	FLAT	48	HDFP	RECTANGULAR	300k Rad(Si)	UNSPECIFIED	YES	3.6 V	3		MIL-PRF-38535 Class V		GENERAL PURPOSE	65 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V			FLATPACK, HEAT SINK/SLUG	FL48,.38,24			.00001 Amp	3 V	.635 mm	125 Cel		N/S	-55 Cel			DUAL	R-XDFP-F48		2.72 mm	9.65 mm	Qualified	2000 Amp		3						15.745 mm	26.75 V
5962F0153403V9X	STMicroelectronics	LINE DRIVER	MILITARY	NO LEAD	48	DIE	RECTANGULAR	300k Rad(Si)	UNSPECIFIED	YES	3.6 V	1		MIL-PRF-38535 Class V	1.5 ns	GENERAL PURPOSE	65 mA	STANDARD				UNCASED CHIP					3 V		125 Cel			-55 Cel	21		UPPER	R-XUUC-N48				Qualified					YES					.25 V
5962F0153403VYC	STMicroelectronics	LINE DRIVER		FLAT	48	DFP	RECTANGULAR	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	3		MIL-PRF-38535 Class V		EIA-644; TIA-644	65 mA		3.3 V			FLATPACK	FL48,.4,25				3 V	.635 mm	125 Cel			-55 Cel	3		DUAL	R-CDFP-F48		2.72 mm	9.65 mm	Qualified		TRUE			YES				15.75 mm	.25 V
5962F0153403VYX	STMicroelectronics	LINE DRIVER	MILITARY	FLAT	48	HDFP	RECTANGULAR	300k Rad(Si)	UNSPECIFIED	YES	3.6 V	3		MIL-PRF-38535 Class V	1.5 ns	GENERAL PURPOSE	65 mA	STANDARD				FLATPACK, HEAT SINK/SLUG	FL48,.38,24			.00001 Amp	3 V	.635 mm	125 Cel		DIFFERENTIAL	-55 Cel	3		DUAL	R-XDFP-F48		2.72 mm	9.65 mm	Qualified					YES				15.745 mm	.25 V
PDI1284P11DL	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V		0 Cel	14	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	2.8 mm	7.5 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER LINES PERIPHERAL AND 5 ADDITIONAL CONTROL LINES FROM CABLE	NO	e4	30	260	15.875 mm		20 ns
935223080698	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER	NO		NOT SPECIFIED	NOT SPECIFIED	12.5 mm		20 ns
PDI1284P11DL-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.8 mm	7.5 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER LINES PERIPHERAL AND 5 ADDITIONAL CONTROL LINES FROM CABLE	NO	e4			15.875 mm		20 ns
PDI1284P11DGG-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER	NO				12.5 mm		20 ns
PDI1284P11DL,112	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V		0 Cel	14	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	2.8 mm	7.5 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER LINES PERIPHERAL AND 5 ADDITIONAL CONTROL LINES FROM CABLE	NO	e4	30	260	15.875 mm		20 ns
PDI1284P11DGG,698	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm				13	6 ADDITIONAL BUFFER/DRIVER	NO	e4	30	260	12.5 mm		20 ns
935223080112	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER	NO	e4			12.5 mm		20 ns
PDI1284P11DGG,512	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER	NO	e4	30	260	12.5 mm		20 ns
PDI1284P11DGG,518	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER	NO	e4			12.5 mm		20 ns
935223080118	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER	NO		NOT SPECIFIED	NOT SPECIFIED	12.5 mm		20 ns
PDI1284P11DGG,112	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm				13	6 ADDITIONAL BUFFER/DRIVER	NO	e4	30	260	12.5 mm		20 ns
PDI1284P11DGG	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER	NO	e4	30	260	12.5 mm		20 ns
PDI1284P11DGG,118	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm				13	6 ADDITIONAL BUFFER/DRIVER	NO	e4	30	260	12.5 mm		20 ns
935223090112	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V		0 Cel	14		DUAL	R-PDSO-G48		2.8 mm	7.5 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER LINES PERIPHERAL AND 5 ADDITIONAL CONTROL LINES FROM CABLE	NO		NOT SPECIFIED	NOT SPECIFIED	15.875 mm		20 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.