48 Line Drivers & Receivers 790

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX9278GTM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm
MAX9277GTM+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS			195 mA			1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9248ECM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100	GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9277GTM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100		195 mA			1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9282GTM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm			TRUE	1		YES	e3	30	260	7 mm
MAX9217ETM+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified					YES	e3	30	260	6 mm		0 ns
MAX9268GCM/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100	ISO 10605	280 mA	STANDARD	3.3 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9281GTM/V+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100		195 mA			1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9281GTM+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS			195 mA			1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9250ETM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified			1		YES	e3	30	260	6 mm		0 ns
MAX9218ETM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified			1			e3	30	260	6 mm		0 ns
MAX9247GCM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE		STANDARD	3.3 V		FLATPACK, LOW PROFILE, FINE PITCH				3 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified				ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm
MAX9236EUM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	98 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4			e0			12.5 mm		0 ns
MAX9250GCM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	89 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9248GCM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS			120 mA		3.3 V	3.3	FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9248GCM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9282GTM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm
MAX9268GCM/V+TGG5	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		ISO 10605	280 mA	DIFFERENTIAL	3.3 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		.00001 Amp	3 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm		2 Amp	COMPLEMENTARY	1		NO	e3	30	260	7 mm	.25 V
MAX9258AGCM/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS	AEC-Q100				3.3 V	3.3	FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9242GUM	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-644; TIA-644		STANDARD	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns
MAX9218ECM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100	GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX9249GCM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.9 V	1	CMOS	AEC-Q100	ISO 10605	220 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.8	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Line Driver or Receivers		1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
MAX9247ECM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100	GENERAL PURPOSE	75 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified				ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9272AGTM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1	CMOS		ISO 10605		DIFFERENTIAL	1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm				1		NO	e3	30	260	7 mm
MAX9248ECM/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100		120 mA		3.3 V	3.3	FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9254EUM	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-644; TIA-644		STANDARD	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns
MAX9257AGCM/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS	AEC-Q100				3.3 V	3.3	FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9250ECM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		GENERAL PURPOSE	89 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQFP-G48	1	1.6 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
MAX9257AGCM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	AEC-Q100	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX9272AGTM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1	CMOS		ISO 10605		DIFFERENTIAL	1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm				1		NO	e3	30	260	7 mm
MAX9282GTM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100	I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm			TRUE	1		YES	e3	30	260	7 mm
MAX9217ECM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100	GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9272AGTM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1	CMOS		ISO 10605		DIFFERENTIAL	1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm				1		NO	e3	30	260	7 mm
MAX9248ECM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9250ECM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100	GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9277GTM+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS			195 mA			1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9217ETM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified					YES	e3	30	260	6 mm		0 ns
MAX9247ECM+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	75 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9213ETM+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-644; TIA-644		STANDARD	3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	85 Cel		-40 Cel	3	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm
MAX9247GCM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	75 mA	STANDARD	3.3 V		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		.00002 Amp	3 V	.5 mm	105 Cel	DIFFERENTIAL	-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm			COMPLEMENTARY			YES	e3	30	260	7 mm	.25 V
MAX9247ECM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			75 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9278GTM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100	I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm			TRUE	1		YES	e3	30	260	7 mm
MAX9281GTM+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS			195 mA			1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9282GTM/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100	I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm
MAX9277GTM/V+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100		195 mA			1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9244GUM	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-644; TIA-644		STANDARD	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns
MAX9278GGM/VY+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100	I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel			QUAD	S-XQCC-N48		.8 mm	7 mm			TRUE	1		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm
MAX9246GUM	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-644; TIA-644		STANDARD	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.