48 Line Drivers & Receivers 790

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	No. of Bits	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS100BR410SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4	CMOS				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V	2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.28SQ,20	2.375 V	Line Driver or Receivers	.00001 Amp	2.375 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	4		YES	e3	30	260	7 mm		0 ns
DS90UR905QSQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1						I2C		DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified			1		YES				7 mm
DS89C387TMEA/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				CMOS			11 ns				5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers	.000001 Amp		.635 mm	85 Cel		3-STATE	-40 Cel	12	MATTE TIN	DUAL	R-PDSO-G48	2A			Not Qualified					YES	e3	30	260		2 V	0 ns
DS90UB924TRHSTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm
DS90C241QVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100			ISO 10605		STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
DS90C363MTD/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS				EIA-644; TIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	12.5 mm		0 ns
DS90C185SQX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		5					93.96 ns		85 mA		1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	1.71 V	Line Driver or Receivers			.4 mm	70 Cel	1.8 V	DIFFERENTIAL	-10 Cel		MATTE TIN	QUAD	S-PQCC-N48	1	.8 mm	6 mm	Not Qualified		COMPLEMENTARY	5		YES	e3	30	260	6 mm		0 ns
DS90UA102TRHSTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100			ISO 10605	96 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.28SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm		0 ns
TRSF23243IDGGR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel			-40 Cel	6		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified	1.6 Amp		10		NO		NOT SPECIFIED	NOT SPECIFIED	12.5 mm	10 V	0 ns
DS89C386TMEA/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	12		CMOS				EIA-422-B; TIA-422-B	69 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers		4.5 V	.635 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	2A	2.74 mm	7.5 mm	Not Qualified	6 Amp		12			e3	30	260	15.875 mm		30 ns
LMH0070SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5						GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
SN75LVDS84CDGGR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1						GENERAL PURPOSE			3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.5 mm	70 Cel			0 Cel			DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified									12.5 mm
DS90CR562MTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		CMOS				EIA-644; TIA-644	80 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers			.5 mm	70 Cel			-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4			e0		235	12.5 mm		0 ns
SN75C23243DGGR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3						EIA-232-F; TIA-232-F	2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	1.6 Amp	TRUE	10	ALSO OPERATE WITH SUPPLY VOLTAGE OF 5V	YES	e4	NOT SPECIFIED	260	12.5 mm	10 V	0 ns
DS15MB200TSQX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS			2.5 ns	GENERAL PURPOSE	275 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Other Interface ICs		3 V	.5 mm	85 Cel			-40 Cel	2		QUAD	S-PQCC-N48		.8 mm	7 mm	Not Qualified			2		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm		2.5 ns
LMH0070SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	5						GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm						NO	e3	30	260	7 mm		0 ns
SN74AVCA406DGGRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		18	7.7 ns	GENERAL PURPOSE	.02 mA	STANDARD	1.8 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	1.4 V	Other Interface ICs		1.4 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	13	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	.08 Amp	TRUE	14		NO	e4	NOT SPECIFIED	260	12.5 mm		7.7 ns
SN752232DLR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	6		BIPOLAR			500 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-9/+-12	-9 V	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.635 mm	70 Cel	9 V		0 Cel	6		DUAL	R-PDSO-G48		2.79 mm	7.49 mm	Not Qualified	10 Amp		10		NO		NOT SPECIFIED	NOT SPECIFIED	15.875 mm	12 V	250 ns
SN75C23243DL	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers	.000001 Amp	3 V	.635 mm	70 Cel			0 Cel	6	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified	1.6 Amp		10	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	15.875 mm	10 V	0 ns
LMH0050SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	5						GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm						NO	e3	30	260	7 mm		0 ns
LMH0070SQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5						GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
DS90CF363MTD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3		CMOS				EIA-644; TIA-644	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns
LMH0040SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5						GENERAL PURPOSE	85 mA	STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	5	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm			COMPLEMENTARY			NO	e3	30	260	7 mm	2.7 V	0 ns
LMH0050SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	5						GENERAL PURPOSE	85 mA	DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			COMPLEMENTARY			NO	e3	30	260	7 mm	2.7 V	0 ns
SN74LVC161284DGG	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			40 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.7 V			3 V	.5 mm	70 Cel	5 V		0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			8	CONTAINS 5 DRIVERS, 4 RECEIVERS AND EIGHT BI-DIRECTIONAL LINES	NO	e4	30	260	12.5 mm		40 ns
LMH0071SQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6						GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified			6		NO	e0	30	235	7 mm
LMH0071SQE	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6						GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified			6		NO	e0	30	235	7 mm
LMH0051SQE	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6						GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified			6		NO	e0	30	235	7 mm
LMH0040SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5						GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
TRSF23243CDGGR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	1.6 Amp	INVERTED	10		NO	e4	NOT SPECIFIED	260	12.5 mm	10 V	0 ns
DS90CR215MTDX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				EIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	12.5 mm		0 ns
LMH0340SQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5						GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
TRSF23243CDL	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers	.000001 Amp	3 V	.635 mm	70 Cel			0 Cel	6		DUAL	R-PDSO-G48		2.79 mm	7.49 mm	Not Qualified	1.6 Amp		10		NO		NOT SPECIFIED	NOT SPECIFIED	15.875 mm	10 V	0 ns
DS90UR241IVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1		CMOS	AEC-Q100				90 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm	2 V	0 ns
SN752232DGG	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	6		BIPOLAR			500 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-9/+-12	-9 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.5 mm	70 Cel	9 V		0 Cel	6		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified	10 Amp		10		NO		NOT SPECIFIED	NOT SPECIFIED	12.5 mm	12 V	250 ns
SN74AVCA406ZQCR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		18	7.7 ns	GENERAL PURPOSE	.02 mA	STANDARD	1.8 V	3.6 V	3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20	1.4 V	Other Interface ICs		1.4 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	13	TIN SILVER COPPER	BOTTOM	R-PBGA-B48	1	1 mm	4 mm	Not Qualified	.08 Amp	TRUE	14		NO	e1	30	260	4 mm		7.7 ns
SN75C23243DGG	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel			0 Cel	6		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified	1.6 Amp		10	ALSO OPERATES AT 5V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	12.5 mm	10 V	0 ns
DS90C365AMT	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS				EIA-644; TIA-644	60 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	3	TIN LEAD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified					YES	e0	20	235	12.5 mm		0 ns
DS90CR212MTD	Texas Instruments	LINE RECEIVER		GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3							80 mA	DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20				4.5 V	.5 mm	70 Cel			-10 Cel			DUAL	R-PDSO-G48		1.1 mm	6.1 mm				3		NO				12.5 mm
DS90UB638TRGZTQ1	Texas Instruments	LINE RECEIVER		NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	1			AEC-Q100			GENERAL PURPOSE	205 mA	DIFFERENTIAL	1.1 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20			.00019 Amp	1.045 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm		2 Amp		1		NO	e4		260	7 mm
DS90UB638TRGZRQ1	Texas Instruments	LINE RECEIVER		NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	1			AEC-Q100			GENERAL PURPOSE	205 mA	DIFFERENTIAL	1.1 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20			.00019 Amp	1.045 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm		2 Amp		1		NO	e4		260	7 mm
MAX9247GCM+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				GENERAL PURPOSE	75 mA	STANDARD	3.3 V		3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified				ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9240AGTM/V+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES				BICMOS	AEC-Q100								1.8,1.8/3.3		CHIP CARRIER	LCC48,.28SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9240AGTM+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES				BICMOS									1.8,1.8/3.3		CHIP CARRIER	LCC48,.28SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9211ETM	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3		CMOS				EIA-644; TIA-644	90 mA	STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	3	TIN LEAD	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified					YES	e0			7 mm		0 ns
MAX9217ECM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				GENERAL PURPOSE		STANDARD	3.3 V		3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9210ETM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	VQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	4		CMOS				EIA-644; TIA-644		DIFFERENTIAL	3.3 V				CHIP CARRIER, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified			4			e3	30	260	7 mm		0 ns
MAX9278GTM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS				I2C	.3 mA	DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20				3 V	.5 mm	105 Cel		3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm			TRUE	1		YES	e3	30	260	7 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.