48 Line Drivers & Receivers 790

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	No. of Bits	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN74LVCE161284DLR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13				19	30 ns	IEEE-1284	45 mA	STANDARD	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V	3-STATE	0 Cel	14	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified	84 Amp		13		NO	e4	NOT SPECIFIED	260	15.875 mm		18 ns
DS89C387TMEA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	12		CMOS			11 ns	EIA-422-B; TIA-422-B		STANDARD	5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers	.000001 Amp	4.5 V	.635 mm	85 Cel		3-STATE	-40 Cel	12	TIN LEAD	DUAL	R-PDSO-G48	1	2.74 mm	7.5 mm	Not Qualified					YES	e0	20	235	15.88 mm	2 V	0 ns
DS90CF363BMTX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS				EIA-644; TIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	12.5 mm		0 ns
TRSF23243CDGG	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel			0 Cel	6		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified	1.6 Amp		10		NO		NOT SPECIFIED	NOT SPECIFIED	12.5 mm	10 V	0 ns
SN65LVDS308ZQCT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS				GENERAL PURPOSE	37 mA	DIFFERENTIAL	1.8 V		1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm	4 mm	Not Qualified			2		NO	e1	30	260	4 mm		0 ns
DS110RT410SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm	2 V	0 ns
SN65LVDS308ZQCR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS				GENERAL PURPOSE	37 mA	DIFFERENTIAL	1.8 V	1.95 V	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm	4 mm	Not Qualified		TRUE	2		NO	e1	30	260	4 mm		0 ns
SN74LVCZ161284ADL	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	5					22 ns	IEEE 1284		STANDARD	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel			0 Cel	6		DUAL	R-PDSO-G48		2.79 mm	7.5 mm	Not Qualified			5		NO				15.875 mm		10 ns
DS90UH925QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			AEC-Q100			ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	24	Matte Tin (Sn)	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	NOT SPECIFIED	260	7 mm		0 ns
SN65LVDS307ZQCR	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS				GENERAL PURPOSE	25.8 mA	STANDARD	1.8 V	1.95 V	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	4 mm		0 ns
DS90C241IVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100			GENERAL PURPOSE		STANDARD	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified					YES	e0			7 mm
DS90CR217MTDX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				EIA-644; TIA-644	57 mA	STANDARD	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	3	TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified					YES	e0	20	235	12.5 mm		0 ns
SN65LVDS310ZQCR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS					25 mA	DIFFERENTIAL	1.8 V	1.95 V	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V		-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm	4 mm	Not Qualified	390 Amp	TRUE	27		NO	e1	30	260	4 mm		2.5 ns
SN65C23243DGGRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel			-40 Cel	6	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	1.6 Amp		10	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	12.5 mm	10 V	0 ns
DS90UB924TRHSRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm
LMH0341SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6						GENERAL PURPOSE	127 mA	STANDARD	2.5 V	3.465 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified			6		NO	e3	30	260	7 mm	2.7 V	0 ns
LMH0050SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	5						GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm						NO	e3	30	260	7 mm		0 ns
DS90CR216AMTDX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS	AEC-Q100			EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	3		NO	e3	30	260	12.5 mm		0 ns
TRSF23243CDLR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	.635 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified	1.6 Amp	INVERTED	10		NO	e4	NOT SPECIFIED	260	15.875 mm	10 V	0 ns
DS15MB200TSQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS			2.5 ns	GENERAL PURPOSE	275 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Other Interface ICs	.0002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	2		YES	e3	30	260	7 mm		2.5 ns
DS90CF364AMTDX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS				EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		TRUE	3		NO	e0	20	235	12.5 mm		0 ns
DS90CR213MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4						EIA-644; TIA-644		STANDARD	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.5 mm	70 Cel			-10 Cel	4		DUAL	R-PDSO-G48		1.1 mm	6.1 mm						YES				12.5 mm
SN75LVDS86CDGG	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1						GENERAL PURPOSE			3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.5 mm	70 Cel			0 Cel			DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified									12.5 mm
DS90UB914ATRHSJQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100			ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				2		YES	e3	30	260	7 mm		0 ns
LMH0050SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5						GENERAL PURPOSE		STANDARD	2.5 V	3.465 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
SN65LVDS96DGGRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS				EIA-644; TIA-644	82 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified	.02 Amp	TRUE	3		NO	e4	30	260	12.5 mm		0 ns
DS90CR218AMTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				EIA-644; TIA-644	115 mA	DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified			3		NO	e0	20	235	12.5 mm		0 ns
SN65C23243DGGR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	1.6 Amp		10	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	12.5 mm	10 V	0 ns
DS90C241IVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100			ISO 10605		STANDARD	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
SN74LV161284DL	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	13				19	30 ns	IEEE 1284	70 mA	SCHMITT TRIGGER	5 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		4.5 V			4.5 V	.635 mm	85 Cel	5 V	3-STATE	-40 Cel	13	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified	.014 Amp		17		NO	e4	30	260	15.875 mm		30 ns
SN75C23243DGGRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel			0 Cel	6	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	1.6 Amp		10	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	12.5 mm	10 V	0 ns
V62/04643-01XE	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS				EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
DS90UB904QSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100			GENERAL PURPOSE	96 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8,1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE	1			e3	30	260	7 mm		0 ns
DS90UB904QSQX	Texas Instruments	LINE RECEIVER		NO LEAD	48		SQUARE	UNSPECIFIED	YES														CHIP CARRIER													QUAD	S-XQCC-N48				Not Qualified
DS90CR211MTD	Texas Instruments	LINE DRIVER		GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3							53 mA	STANDARD	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20				4.5 V	.5 mm	70 Cel		3-STATE	-10 Cel	3		DUAL	R-PDSO-G48		1.1 mm	6.1 mm		2 Amp				YES				12.5 mm	.25 V
DS90C363AMTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS				EIA-644; TIA-644	52 mA	STANDARD	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	4	TIN LEAD	DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns
SN65MLVD128DGGG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			3 ns	EIA-899; TIA-899		STANDARD	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			1		YES	e4	30	260	12.5 mm		3 ns
DS90CF561MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS				EIA-644; TIA-644	48 mA	STANDARD	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers			.5 mm	70 Cel			-10 Cel	4	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified					YES	e0	30	235	12.5 mm		0 ns
SN75C23243DLG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6						EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers	.000001 Amp	3 V	.635 mm	70 Cel			0 Cel	6	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified	1.6 Amp		10	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	15.875 mm	10 V	0 ns
DS90C124IVSX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100			GENERAL PURPOSE	75 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS90UA102TRHSJQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100			ISO 10605	96 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.28SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm		0 ns
SN74AVCA406DGGRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			7.7 ns	GENERAL PURPOSE		STANDARD	1.8 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Other Interface ICs		1.4 V	.5 mm	85 Cel			-40 Cel	13	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			14		NO	e4	30	260	12.5 mm		7.7 ns
SN75C23243CDGGR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3						EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	70 Cel			0 Cel	6		DUAL	R-PDSO-G48		1.2 mm	6.1 mm				10		NO				12.5 mm
DS100BR410SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4	CMOS				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V	2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.28SQ,20	2.375 V	Line Driver or Receivers	.00001 Amp	2.375 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	4		YES	e3	30	260	7 mm		0 ns
DS90UR905QSQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1						I2C		DIFFERENTIAL	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified			1		YES				7 mm
DS89C387TMEA/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				CMOS			11 ns				5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers	.000001 Amp		.635 mm	85 Cel		3-STATE	-40 Cel	12	MATTE TIN	DUAL	R-PDSO-G48	2A			Not Qualified					YES	e3	30	260		2 V	0 ns
DS90UB924TRHSTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm
DS90C241QVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100			ISO 10605		STANDARD	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.