48 Line Drivers & Receivers 790

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	No. of Bits	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90C185SQ/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		5				93.96 ns		85 mA		1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	1.71 V	Line Driver or Receivers			.4 mm	70 Cel	1.8 V	DIFFERENTIAL	-10 Cel		MATTE TIN	QUAD	S-PQCC-N48	1	.8 mm	6 mm	Not Qualified		COMPLEMENTARY	5		YES	e3	30	260	6 mm		0 ns
SN65MLVD048RGZT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			6 ns	EIA-899; TIA-899	94 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	7 mm		6 ns
SN65LVDS86AQDGG	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	125 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	3		NO	e4	30	260	12.5 mm		7 ns
SN65C23243DLR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6					EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	.635 mm	85 Cel	3.3 V		-40 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified	1.6 Amp	INVERTED	10	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	15.875 mm	10 V	0 ns
LMH0041SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.6 V	1						127 mA	STANDARD	2.5 V	3.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.1 V			2.4 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified			6		NO	e3	30	260	7 mm		0 ns
DS15MB200TSQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			2.5 ns	GENERAL PURPOSE	275 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Other Interface ICs		3 V	.5 mm	85 Cel			-40 Cel	2	TIN LEAD	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified			2		YES	e0		260	7 mm		2.5 ns
SN65MLVD129DGGG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			3 ns	EIA-899; TIA-899		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			2		YES	e4	30	260	12.5 mm		3 ns
DS90C185SQE/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		5				93.96 ns		85 mA		1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	1.71 V	Line Driver or Receivers			.4 mm	70 Cel	1.8 V	DIFFERENTIAL	-10 Cel		MATTE TIN	QUAD	S-PQCC-N48	1	.8 mm	6 mm	Not Qualified		COMPLEMENTARY	5		YES	e3	30	260	6 mm		0 ns
SN75LVDS85DGG	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				EIA-644	100 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	12.5 mm		0 ns
LMH0071SQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm				5		YES	e3	30	260	7 mm		0 ns
DS90C241QVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100			ISO 10605		STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
DS90CF364AMTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS				EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		TRUE	3		NO	e0	20	235	12.5 mm		0 ns
LMH0040SQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
LMH0050SQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
DS90CF363BMT	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				EIA-644; TIA-644	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	4	TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified					YES	e0	20	235	12.5 mm		0 ns
DS90CR217MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				EIA-644; TIA-644	57 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	21	TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified				SEATED HGT-NOM	YES	e0	20	235	12.5 mm		0 ns
DS90CF564MTD/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	CMOS				EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	4.75 V	Line Driver or Receivers			.5 mm	70 Cel	5 V		-10 Cel		MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		NO	e3	30	260	12.5 mm		0 ns
DS90CR216MTDX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS				EIA-644; TIA-644	105 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		TRUE	3		NO	e0	20	235	12.5 mm	2.7 V	0 ns
SN65LVDM320DGGRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3				8.7 ns	EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	85 Cel			-40 Cel	8		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified			3		YES		NOT SPECIFIED	NOT SPECIFIED	12.5 mm		9.8 ns
TRSF23243IDGGG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6					EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel			-40 Cel	6		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified	1.6 Amp		10		NO		NOT SPECIFIED	NOT SPECIFIED	12.5 mm	10 V	0 ns
SN75LVDS85CDGGR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1					GENERAL PURPOSE			3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.5 mm	70 Cel			0 Cel			DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified									12.5 mm
SN75LVDS84DGGG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					EIA-644; TIA-644	100 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE			YES	e4	30	260	12.5 mm		0 ns
SN65LVDS84AQDGGREP	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS				EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	125 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified					YES	e4			12.5 mm
SN752232DL	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	6	BIPOLAR			500 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-9/+-12	-9 V	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.635 mm	70 Cel	9 V		0 Cel	6		DUAL	R-PDSO-G48		2.79 mm	7.49 mm	Not Qualified	10 Amp		10		NO		NOT SPECIFIED	NOT SPECIFIED	15.875 mm	12 V	250 ns
DS90UR904QSQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1		AEC-Q100			I2C	96 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm		0 ns
SN74LVCE161284VR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13				30 ns	IEEE-1284		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.4 mm	70 Cel			0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	4.4 mm	Not Qualified			13		NO	e4	30	260	9.7 mm		18 ns
SN65LVDS95DGGG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
SN74LV161284DLG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	13				30 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.5 V	.635 mm	85 Cel			-40 Cel	13	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified			17		NO	e4	30	260	15.875 mm		30 ns
SN65C23243DLRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6					EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers	.000001 Amp	3 V	.635 mm	85 Cel			-40 Cel	6	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified	1.6 Amp		10	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	15.875 mm	10 V	0 ns
SN74LVC161284DLR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		19	40 ns	IEEE 1284	45 mA	SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V	3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.79 mm	7.5 mm	Not Qualified	84 Amp	TRUE	8	CONTAINS 5 DRIVERS, 4 RECEIVERS AND EIGHT BI-DIRECTIONAL LINES	NO	e4	30	260	15.875 mm		40 ns
LMH0050SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
TRSF23243IDLR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6					EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers	.000001 Amp	3 V	.635 mm	85 Cel			-40 Cel	6		DUAL	R-PDSO-G48		2.79 mm	7.49 mm	Not Qualified	1.6 Amp		10		NO		NOT SPECIFIED	NOT SPECIFIED	15.875 mm	10 V	0 ns
DS90CR564MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS				EIA-644		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		4.5 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	DUAL	R-PDSO-G48		1.1 mm	6.1 mm	Not Qualified			3			e0			12.5 mm		0 ns
DS90UB921TRHSTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100			GENERAL PURPOSE		STANDARD	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel	1	Matte Tin (Sn)	QUAD	S-PQCC-N48	3	.8 mm	7 mm						YES	e3	30	260	7 mm
SN65LVDS84AQDGGR	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS				EIA-644; TIA-644	39 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
LMH0051SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm				5		YES	e3	30	260	7 mm		0 ns
DS90CF562MTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	CMOS				EIA-644; TIA-644	80 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers			.5 mm	70 Cel			-10 Cel		Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			4			e0	30	235	12.5 mm		0 ns
SN75LVDS84ADGGG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS				EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		INVERTED			YES	e4	30	260	12.5 mm		0 ns
TRSF23243CDGGRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6					EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel			0 Cel	6	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	1.6 Amp		10		NO	e4	30	260	12.5 mm	10 V	0 ns
DS15BR401TVS	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				2 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			4		YES	e0		260	7 mm		2 ns
DS90C365AMT/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS				EIA-644; TIA-644	60 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	12.5 mm		0 ns
LMH0340SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
SN65C23243DGGRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6					EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel			-40 Cel	6	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	1.6 Amp		10	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	12.5 mm	10 V	0 ns
SN752232DLRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	6	BIPOLAR			500 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-9/+-12	-9 V	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.635 mm	70 Cel	9 V		0 Cel	6		DUAL	R-PDSO-G48		2.79 mm	7.49 mm	Not Qualified	10 Amp		10		NO		NOT SPECIFIED	NOT SPECIFIED	15.875 mm	12 V	250 ns
SN65LVDS96IDGGR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.5 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified			1						12.5 mm
DS90CF366MTDX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS				EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified			3			e0	20	235	12.5 mm		0 ns
LMH0041SQE	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified			6		NO	e0	30	235	7 mm
DS90C241IVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100			ISO 10605		STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.