INDUSTRIAL Other Function Interface ICs 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	No. of Bits	Maximum Supply Current	Output Latch/Register	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Maximum Delay	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
FXLA0104QFX-F106	Onsemi	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	12	VQCCN	RECTANGULAR	UNSPECIFIED	YES	3.6 V	1						3.3 V				CHIP CARRIER, VERY THIN PROFILE	LCC12,.07X.08,16			1.1 V	.4 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-XQCC-N12	1	.55 mm	1.7 mm			e4	30	260	2 mm
GTL2002DC,125	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1							3.6 V			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3 V		0 V	.5 mm	85 Cel	3.3 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1 mm	2 mm	Not Qualified		e4	30	260	2.3 mm
GTL2005PW/DG,118	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4						3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified		e4			5 mm
ADUM7640CRQZ-RL7	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V		3 V	.64 mm	105 Cel	3.3 V		-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	1	1.75 mm	3.91 mm			e3	30	260	8.66 mm
HCTL-2032-SC	Broadcom	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	32	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS				5 V		5		SMALL OUTLINE	SOP32,.4		Other Interface ICs	4.5 V	1.27 mm	100 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G32	3	2.54 mm	7.5184 mm	Not Qualified		e3		260	20.7772 mm
LTC4301LIDD#PBF	Analog Devices	BUS BUFFERS	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1						3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				2.7 V	.5 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified		e3	30	260	3 mm
PCA9517AD,112	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS				1.2 V	5.5 V	3/5		SMALL OUTLINE	SOP8,.25	2.7 V	Line Driver or Receivers	.9 V	1.27 mm	85 Cel	3.3 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		e4	30	260	4.9 mm
PCA9570GMH	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	8	QCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				2.2 V				CHIP CARRIER				1.1 V		85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N8	1	.5 mm	1.2 mm			e4	30	260	1.4 mm
ADUM6403ARWZ-RL	Analog Devices	DIGITAL ISOLATOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						3.3 V				SMALL OUTLINE	SOP16,.25			3 V	1.27 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified		e3	30	260	10.3 mm
ADUM7442CRQZ	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS				3.3 V				SMALL OUTLINE				3 V	.65 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.91 mm	Not Qualified		e3		260	4.9 mm
DS80PCI402SQE/NOPB	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	2.625 V	1	8	BICMOS				2.5 V		2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC54,.2X.4,20		Line Driver or Receivers	2.375 V	.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD	R-XQCC-N54	2	.8 mm	5.5 mm	Not Qualified	ALSO OPERATES AT 3.3V SUPPLY	e3	30	260	10 mm
GTL2005PW/G,118	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4						3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G14		1.1 mm	4.4 mm						5 mm
MAX13047EEVB+T	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	10	VQCCN	RECTANGULAR	UNSPECIFIED	YES	3.6 V	2		BICMOS				1.8 V	5.5 V			CHIP CARRIER, VERY THIN PROFILE		1.65 V		1.1 V	.4 mm	85 Cel	3.3 V		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N10	1	.55 mm	1.4 mm			e4	30	260	1.8 mm
MAX3392EEUD	Maxim Integrated	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS				3.3 V		1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Other Interface ICs	1.65 V	.65 mm	85 Cel			-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified	USED FOR SPI, MICROWIRE AND I2C LEVEL TRANSLATION	e0			5 mm
ADUM2402CRIZ	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS				3 V				SMALL OUTLINE	SOP16,.4			2.7 V	1.27 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	3	2.64 mm	7.5 mm			e3	30	260	12.75 mm
ADUM6404CRWZ	Analog Devices	DIGITAL ISOLATOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						3.3 V				SMALL OUTLINE	SOP16,.25			3 V	1.27 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified		e3	30	260	10.3 mm
PCA9306YZTR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	5 V	2			2		LATCH	3 V	5.5 V		1.3 ns	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	1.8 V	Other Interface ICs	0 V	.5 mm	85 Cel		OPEN-DRAIN	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-XBGA-B8	1	.625 mm	.9 mm	Not Qualified		e1	NOT SPECIFIED	260	1.9 mm
ADUM1410ARWZ-RL	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS				3 V				SMALL OUTLINE	SOP16,.4			2.7 V	1.27 mm	105 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified		e3	30	260	10.3 mm
MAX3000EEUP	Maxim Integrated	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS					5.5 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	1.65 V	Other Interface ICs	1.2 V	.65 mm	85 Cel			-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified		e0	20	240	6.5 mm
MAX3000EEUP+	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8		BICMOS					5.5 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	1.65 V	Other Interface ICs	1.2 V	.65 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified		e3	30	260	6.5 mm
PCA9509D,118	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS				5 V		1/4.5,3.3/5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	3 V	1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		e4	30	260	4.9 mm
ADUM7641ARQZ-RL7	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V		3 V	.64 mm	105 Cel	3.3 V		-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	1	1.75 mm	3.91 mm			e3	30	260	8.66 mm
GTL2014PWZ	NXP Semiconductors	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1						3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25			3 V	.65 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm					260	5 mm
LTC4303IMS8#PBF	Analog Devices	BUS BUFFERS	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1						3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				2.7 V	.65 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		e3	30	260	3 mm
PCA9517DRG4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS				3 V		3/5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	2.7 V	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	IT CAN ALSO OPERATE 0.9 TO 5.5	e4	30	260	4.9 mm
SN74GTL2010PWR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	10	.005 mA		3.3 V	2.64 V	2.5,3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	2.36 V	Other Interface ICs	3 V	.65 mm	85 Cel	2.5 V	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	1.2 mm	4.4 mm	Not Qualified		e4	30	260	7.8 mm
SN74GTL2010PWRE4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				3.3 V	2.64 V	2.5,3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	2.36 V	Other Interface ICs	3 V	.65 mm	85 Cel	2.5 V		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	1.2 mm	4.4 mm	Not Qualified		e4	30	260	7.8 mm
ADUM7440CRQZ	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS				3.3 V				SMALL OUTLINE				3 V	.65 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.91 mm	Not Qualified		e3		260	4.9 mm
HCTL-2022	Broadcom	INTERFACE CIRCUIT	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS				5 V		5		IN-LINE	DIP20,.3		Other Interface ICs	4.5 V	2.54 mm	100 Cel			-40 Cel	MATTE TIN	DUAL	R-PDIP-T20	1	4.318 mm	7.62 mm	Not Qualified		e3		260	25.908 mm
PCA9515ADT	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS				3 V	3.6 V	2.5/3.3		SMALL OUTLINE	SOP8,.25	2.3 V	Line Driver or Receivers	2.3 V	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		e4	30	260	4.9 mm
ADUM3471ARSZ	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1						3.3 V				SMALL OUTLINE, SHRINK PITCH				3 V	.65 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified		e3		260	7.2 mm
MAX3371EXT-T	Maxim Integrated	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS					5.5 V	1.8/5,3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	1.6 V	Other Interface ICs	2.5 V	.65 mm	85 Cel			-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1	1.1 mm	1.25 mm	Not Qualified		e0			2 mm
MAX3371EXT+T	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS					5.5 V	1.8/5,3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	1.6 V	Other Interface ICs	2.5 V	.65 mm	85 Cel			-40 Cel	NICKEL GOLD PALLADIUM	DUAL	R-PDSO-G6	1	1.1 mm	1.25 mm	Not Qualified			30	260	2 mm
ST2378ETTR	STMicroelectronics	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						1.8 V		2/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Other Interface ICs	1.71 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	3	1.2 mm	4.4 mm	Not Qualified		e4	40	260	6.5 mm
ADUM7640CRQZ	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V		3 V	.64 mm	105 Cel	3.3 V		-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	1	1.75 mm	3.91 mm			e3	30	260	8.66 mm
ADUM7642ARQZ-RL7	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V		3 V	.64 mm	105 Cel	3.3 V		-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	1	1.75 mm	3.91 mm			e3	30	260	8.66 mm
ADUM5242ARZ	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						5 V				SMALL OUTLINE				4.5 V	1.27 mm	105 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		e3	30	260	4.9 mm
ADUM6403ARWZ	Analog Devices	DIGITAL ISOLATOR	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						3.3 V				SMALL OUTLINE	SOP16,.25			3 V	1.27 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified		e3	30	260	10.3 mm
HI-8429PCIF	Holt Integrated Circuits	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.47 V	1		CMOS				3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3.13 V	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn)	QUAD	S-PQCC-N40	3	1 mm	6 mm			e3	40	260	6 mm
MAX3001EAUP+T	Analog Devices		INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES				BICMOS						1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Other Interface ICs		.635 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1			Not Qualified		e3	30	260
MAX3378EEBC-T	Maxim Integrated	INTERFACE CIRCUIT	INDUSTRIAL	BALL	12	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS				3.3 V	5.5 V	1.8/5		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,20	1.65 V	Other Interface ICs	1.2 V	.5 mm	85 Cel	3.3 V		-40 Cel	TIN LEAD	BOTTOM	R-PBGA-B12	1	.67 mm	1.54 mm	Not Qualified	USED FOR SPI, MICROWIRE AND I2C LEVEL TRANSLATION	e0			2.02 mm
PCA9515ADGKTG4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS				3 V	3.6 V	2.5/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	DIP8,.3	2.3 V	Line Driver or Receivers	2.3 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		e4	30	260	3 mm
ADUM7440CRQZ-RL7	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS				3.3 V				SMALL OUTLINE				3 V	.65 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.91 mm	Not Qualified		e3		260	4.9 mm
ADUM7641ARQZ	Analog Devices	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V		3 V	.64 mm	105 Cel	3.3 V		-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	1	1.75 mm	3.91 mm			e3	30	260	8.66 mm
FXLP34FHX	Onsemi	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				1.2 V		1/3.6		SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14		Other Interface ICs	1 V	.35 mm	85 Cel			-40 Cel	NICKEL PALLADIUM	DUAL	S-PDSO-N6	1	.55 mm	1 mm	Not Qualified		e4	30	260	1 mm
HI-8435PQIF	Holt Integrated Circuits	INTERFACE CIRCUIT	INDUSTRIAL			QFP				3.6 V	1		CMOS				3.3 V								3 V	.8 mm	85 Cel			-40 Cel	MATTE TIN			3	2.45 mm	10 mm			e3	40	260	10 mm
MAX3393EEUD	Maxim Integrated	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS				3.3 V		1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Other Interface ICs	1.65 V	.65 mm	85 Cel			-40 Cel	TIN LEAD	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified	USED FOR SPI, MICROWIRE AND I2C LEVEL TRANSLATION	e0			5 mm
TXS0101DBVR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1	.0144 mA		1.8 V		1.8/3.3,2.5/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Other Interface ICs	1.65 V	.95 mm	85 Cel		3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm	Not Qualified	ALSO OPERATES WITH 2.3 TO 5.5 VOLT	e4	30	260	2.9 mm

Other Function Interface ICs

Other function interface ICs are electronic components that provide specific functions for interfacing different devices in electronic systems. They are designed to facilitate the exchange of data and signals between various components of the system.

Other function interface ICs can be classified into several types based on their specific functions and applications. Some of the most common types of interface ICs include:

1. Voltage level translators - These ICs are used to convert voltage levels between different devices in electronic systems, ensuring that signals are compatible and can be correctly interpreted.

2. Real-time clock (RTC) ICs - These ICs are used to keep track of time and date in electronic systems, and they typically include a battery backup to ensure that the clock remains accurate even if the main power supply is lost.

3. Touchscreen controllers - These ICs are used to interface with touchscreens and enable touch-based input in electronic systems.

Other function interface ICs can also include USB controllers, Ethernet controllers, and Bluetooth controllers, among other components. They are typically characterized by their data rate, power consumption, and specific functions.