NXP Semiconductors Line Drivers & Receivers 610

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
NTB0101GW-Q100	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100	14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	1.65 V		1.2 V	.65 mm	125 Cel	1.8 V		-40 Cel	1		DUAL	R-PDSO-G6		1.1 mm	1.25 mm				1	ALSO OPERATES WITH 1.65 TO 5.5 VOLT	NO				2 mm		14.2 ns
MC1489D-T	NXP Semiconductors	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.005 V	4	BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V			SMALL OUTLINE				4.995 V	1.27 mm	75 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED	1						8.65 mm		85 ns
MC1489F	NXP Semiconductors	LINE RECEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.005 V	4	BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V			IN-LINE				4.995 V	2.54 mm	75 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	1						19.535 mm		85 ns
ISP1507DBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY					4 mm		17 ns
ISP1507FBS,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY	NO				4 mm		17 ns
TDA8579T/N1SU	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	2				GENERAL PURPOSE		DIFFERENTIAL	8.5 V			SMALL OUTLINE				5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm				1			e4	30	260	4.9 mm
P82B96DP-T	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	15 V	2	BIPOLAR			GENERAL PURPOSE	2.5 mA	STANDARD	5 V		2/15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Other Interface ICs	2 V	.65 mm	85 Cel			-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			2		NO	e4			3 mm
PCA9516AD,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.7 V	10	CMOS		150 ns	GENERAL PURPOSE		STANDARD	2.5 V			SMALL OUTLINE				2.3 V	1.27 mm	85 Cel			-40 Cel	10	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			10	SUPPLY VOLTAGE 3.3 V ALSO POSSIBLE	NO	e4	30	260	9.9 mm		150 ns
AM26LS32MF	NXP Semiconductors	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR			EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			IN-LINE				4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED	4						19.535 mm		25 ns
AM26LS32MN	NXP Semiconductors	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V			IN-LINE				4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		TRUE	4						19.025 mm		25 ns
AM26LS30CD	NXP Semiconductors	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		200 ns	EIA-422; EIA-423		STANDARD	5 V			SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES				9.9 mm
P82B96PN	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	2	BIPOLAR			GENERAL PURPOSE	2.5 mA	STANDARD	5 V		2/15	IN-LINE	DIP8,.3		Other Interface ICs	2 V	2.54 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		4.2 mm	7.62 mm	Not Qualified			2		NO	e4			9.5 mm		0 ns
AM26LS31CD-T	NXP Semiconductors	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		20 ns	EIA-422; FED STD 1020		STANDARD	5 V			SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES				9.9 mm
ISP1104W,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	VBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V		CHIP CARRIER, VERY THIN PROFILE		4 V		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS WITH HYSTERESIS AND ONE DIFFERENTIAL RECEIVER	YES				3 mm		15 ns
ISP1105BS,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N16		1 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES				3 mm		15 ns
TDA8574T	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR			GENERAL PURPOSE		STANDARD	9 V		9	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	6 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified					NO	e4			10.3 mm		0 ns
ISP1104W,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	VBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V		CHIP CARRIER, VERY THIN PROFILE		4 V		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS WITH HYSTERESIS AND ONE DIFFERENTIAL RECEIVER	YES				3 mm		15 ns
TDA8574T/N1,518	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2				GENERAL PURPOSE		STANDARD	9 V			SMALL OUTLINE				6 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					NO	e4			10.3 mm
AM26LS30IN	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		200 ns	EIA-422; EIA-423		STANDARD	5 V			IN-LINE				4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDIP-T16		4.06 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.09 mm
ISP1102AW,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4 V		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified			1		YES				3 mm		15 ns
AM26LS31MN	NXP Semiconductors	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR		20 ns	EIA-422; FED STD 1020		STANDARD	5 V			IN-LINE				4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.025 mm
NTB0101GM,115	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V	1.2/3.6,1.8/5	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	1.65 V	Other Interface ICs	1.2 V	.5 mm	125 Cel	1.8 V		-40 Cel	1	TIN	DUAL	R-PDSO-N6	1	.5 mm	1 mm	Not Qualified			1		NO	e3	30	260	1.45 mm		14.2 ns
ISP1106W-G	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG		3 V		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm		15 ns
ISP1102BS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE	8 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1SQ,20	4 V	Line Driver or Receivers	1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N14		1 mm	2.5 mm	Not Qualified	2 Amp		1		YES	e4			2.5 mm	2.5 V	15 ns
ISP1301BS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES				4 mm		15 ns
ISP1107W-T	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HVBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES				3 mm		15 ns
ISP1302HN,551	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 V		3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES				4 mm		15 ns
5962-7802001MFX	NXP Semiconductors	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4				GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V			FLATPACK				4.5 V		125 Cel			-55 Cel			DUAL	R-GDFP-F16				Not Qualified			4								38 ns
ISP1505CBS,557	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V		3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES	e3/e4			4 mm		17 ns
TDA8579T/N1,112	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	2				GENERAL PURPOSE		DIFFERENTIAL	8.5 V			SMALL OUTLINE				5 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm				1						4.9 mm
ISP1109BS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1	TWO SINGLE ENDED RECEIVERS	YES	e3/e4			5 mm		15 ns
AM26LS33CD-T	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		25 ns
ISP1506ABS,551	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1			11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		NO	e3/e4			4 mm		17 ns
TDA8574T/N1,512	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2				GENERAL PURPOSE		STANDARD	9 V			SMALL OUTLINE				6 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					NO	e4			10.3 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.