NXP Semiconductors Line Drivers & Receivers 610

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ISP1110VH,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		18 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V	4.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			4 V	.5 mm	85 Cel	2.8 V		-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified			1	ALSO REQUIRES 1.65V TO 2.85V SUPPLY	YES				3 mm		15 ns
PCA9542AD,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		.3 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE					2.3 V	1.27 mm	85 Cel			-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			2		NO	e4	30	260	8.65 mm		.3 ns
ISP1107W-G	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HVBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES				3 mm		15 ns
ISP1507EBS,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY	NO				4 mm		17 ns
ISP1102W	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,30/20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		QUAD	S-PQCC-N16	1	.8 mm	3 mm	Not Qualified			1		YES		40	260	3 mm		15 ns
AM26LS32BIN	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		4	BIPOLAR		V.10; V.11; EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		TRUE	4						19.025 mm		26 ns
ISP1505ABS,551	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES	e3/e4			4 mm		17 ns
ISP1106DH-T	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			1.65 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES	e4			5 mm		15 ns
P82B96TD/S410	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	BIPOLAR		GENERAL PURPOSE	2.5 mA	STANDARD	5 V		2/15		SMALL OUTLINE	SOP8,.25		Other Interface ICs		2 V	1.27 mm	125 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			2		NO	e4	30	260	4.9 mm		0 ns
ISP1507EBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4 mm		17 ns
TDA8579N	NXP Semiconductors	LINE RECEIVER		THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	18 V	1			GENERAL PURPOSE		DIFFERENTIAL	8.5 V				IN-LINE					5 V	2.54 mm							DUAL	R-PDIP-T8		4.2 mm	7.62 mm	Not Qualified			2						9.5 mm		0 ns
PCA9508D-T	NXP Semiconductors		INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS							3/5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8				Not Qualified
MC145406N,602	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28	.6 mA	SCHMITT TRIGGER	5 V	13.2 V	5,+-5/+-12	-12 V	IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified	4 Amp	INVERTED	3		NO	e4			19.025 mm		425 ns
PCA9516AD,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.7 V	10	CMOS	150 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE					2.3 V	1.27 mm	85 Cel			-40 Cel	10	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			10	SUPPLY VOLTAGE 3.3 V ALSO POSSIBLE	NO	e4		260	9.9 mm		150 ns
PCA9516APW	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.7 V	10	CMOS	150 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.3 V	.65 mm	85 Cel			-40 Cel	10	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified			10	SUPPLY VOLTAGE 3.3 V ALSO POSSIBLE	NO	e4	30	260	5 mm		150 ns
ISP1102AW	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	18 ns	GENERAL PURPOSE	8 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,30/20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified	2 Amp		1		YES				3 mm	2.5 V	15 ns
ISP1107DH	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			1.65 V	.65 mm	85 Cel	3.3 V		-40 Cel	1		DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES				5 mm		15 ns
ISP1506ABS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		NO	e3/e4	NOT SPECIFIED	NOT SPECIFIED	4 mm		17 ns
ISP1506ABS,557	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		NO	e3/e4	NOT SPECIFIED	NOT SPECIFIED	4 mm		17 ns
PCA9515AD/G,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	2.7 V	2	CMOS	130 ns	GENERAL PURPOSE		STANDARD	2.5 V		2.5/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP8,.25		Line Driver or Receivers		2.3 V	.65 mm	85 Cel			-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			2		NO	e4			3 mm		130 ns
ISP1504ABS,157	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1		YES	e3/e4			5 mm		17 ns
ISP1505ABS,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES	e3/e4			4 mm		17 ns
AM26LS31ID-T	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	20 ns	EIA-422; FED STD 1020		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES				9.9 mm
ISP1302UK	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BALL	25	VFBGA	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH		1.4 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBGA-B25		.64 mm	2.45 mm	Not Qualified			1		YES				2.45 mm		15 ns
ISP1703B	NXP Semiconductors
ISP1106W,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm		15 ns
ISP1102W-T	NXP Semiconductors		INDUSTRIAL	NO LEAD	16	QCCN	SQUARE	PLASTIC/EPOXY	YES						8 mA				1.8/3.3,5		CHIP CARRIER	LCC16,.12SQ,30/20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16				Not Qualified	2 Amp				YES					2.5 V	15 ns
5962-7802002MEX	NXP Semiconductors	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V		125 Cel			-55 Cel			DUAL	R-GDIP-T16				Not Qualified			4								38 ns
MC145583VF	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1000 ns	EIA-232-E; V.28; EIA-562	6 mA	SCHMITT TRIGGER	5 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel		3-STATE	-40 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G28		2 mm	5.25 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP	NO	e0			10.15 mm	10 V	1000 ns
NTB0102GD	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		17.2 ns	GENERAL PURPOSE			1.5 V				SMALL OUTLINE, VERY THIN PROFILE					1.2 V	.5 mm	125 Cel			-40 Cel	2		DUAL	R-PDSO-N8	1	.5 mm	2 mm	Not Qualified			2	IT ALSO OPERATE AT 1.65 TO 5.5 V	NO		30	260	3 mm		17.2 ns
ISP1504C	NXP Semiconductors
ISP1106W	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	18 ns	GENERAL PURPOSE	8 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3,5		CHIP CARRIER, HEAT SINK/SLUG	LCC16,.12SQ,20	3 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16	1	.8 mm	3 mm	Not Qualified	2 Amp		3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm		15 ns
ISP1504C1ET,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	TFBGA	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.6 V				GRID ARRAY, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B36		1.15 mm	3.5 mm	Not Qualified			1		NO				3.5 mm		17 ns
MC145406D,602	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm				3		NO				10.3 mm		425 ns
MC145406D/G,512	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm				3		NO				10.3 mm		425 ns
ISP1507ABS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1						5 mm		17 ns
ISP1107W	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HVBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES				3 mm		15 ns
ISP1301BS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24	1	1 mm	4 mm	Not Qualified			1		YES			260	4 mm		15 ns
AM26LS30CD-T	NXP Semiconductors	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	200 ns	EIA-422; EIA-423		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES				9.9 mm
ISP1504A1ET,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	TFBGA	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.6 V				GRID ARRAY, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B36		1.15 mm	3.5 mm	Not Qualified			1		NO				3.5 mm		17 ns
AM26LS33ID-T	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		25 ns
ISP1507ABS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	5 mm		17 ns
ISP1105W	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	18 ns	GENERAL PURPOSE	8 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3,5		CHIP CARRIER, HEAT SINK/SLUG	LCC16,.12SQ,20	3 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16	1	.8 mm	3 mm	Not Qualified	2 Amp		3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm		15 ns
AM26LS32BCD	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		V.10; V.11; EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		26 ns
NTB0101GN,132	NXP Semiconductors	LINE TRANSCEIVER
ISP1103D	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		145 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified			1		YES				8.65 mm		10 ns
TDA8574	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	12 V	2	BIPOLAR		GENERAL PURPOSE		STANDARD	9 V		9		IN-LINE	DIP16,.3		Line Driver or Receivers		6 V	2.54 mm	85 Cel			-40 Cel	2		DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified					NO				19.025 mm		0 ns
ISP1505A	NXP Semiconductors

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.