NXP Semiconductors Line Drivers & Receivers 610

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
935024380623	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified			3		NO		NOT SPECIFIED	NOT SPECIFIED	10.3 mm		425 ns
74AUP1G38	NXP Semiconductors	LINE DRIVER
74AUP1G34	NXP Semiconductors	LINE DRIVER
PDI1284P11DGG,112	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm				13	6 ADDITIONAL BUFFER/DRIVER	NO	e4	30	260	12.5 mm		20 ns
74AUP2G34	NXP Semiconductors	LINE DRIVER
PDI1284P11DGG	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER	NO	e4	30	260	12.5 mm		20 ns
74AUP1G58	NXP Semiconductors	LINE DRIVER
74AUP2G08	NXP Semiconductors	LINE DRIVER
PDIUSBP11DB-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified			1		YES				6.2 mm		20 ns
74HCT1284DB	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	31 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.7 V	.65 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified			4		NO				7.2 mm		10 ns
PDIUSBP11D-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified			1		YES				8.65 mm		20 ns
935279416512	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm				3		NO				10.3 mm		425 ns
74AUP1G132	NXP Semiconductors	LINE DRIVER
NE5180N	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		EIA-232-C; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	100 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T28		5.08 mm	15.24 mm	Not Qualified		TRUE	8						36.51 mm		500 ns
74LVC1284PW-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			4		NO	e4			6.5 mm		9 ns
PTN3332DH,112	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified	8 Amp		4			e4		260	5 mm		6 ns
PDIUSBP11AD	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	300 ns	GENERAL PURPOSE	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified			1		YES				8.65 mm		18 ns
935275801118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		.3 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE					2.3 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm				2		NO				8.65 mm		.3 ns
935269825118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER		3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES		NOT SPECIFIED	NOT SPECIFIED	3 mm		15 ns
PTN3342D	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			4			e4			9.9 mm		6 ns
NTS0102GF	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V			SMALL OUTLINE, VERY THIN PROFILE		2.3 V			1.65 V	.35 mm	125 Cel	2.5 V		-40 Cel	2	Tin (Sn)	DUAL	R-PDSO-N8	1	.5 mm	1 mm	Not Qualified			2		NO	e3	30	260	1.35 mm		8.8 ns
74AUP2T1326GF	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	NO LEAD	10	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		6.7 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.65 V				SMALL OUTLINE, VERY THIN PROFILE					1.1 V	.35 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1	.5 mm	1 mm	Not Qualified					NO	e4			1.7 mm
74HCT1284D	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	31 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.7 V	1.27 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified			4		NO				12.8 mm		10 ns
PDIUSBP11PWDH	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		300 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G14		1.1 mm	4.4 mm	Not Qualified			1		YES				5 mm		20 ns
74AUP1G14	NXP Semiconductors	LINE DRIVER
PDI1394P11BD-S	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3			IEEE 1394		DIFFERENTIAL	3.3 V				FLATPACK, LOW PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	2		QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified			2		YES				10 mm		0 ns
74AUP2G240	NXP Semiconductors	LINE DRIVER
TDA9982A/15	NXP Semiconductors	LINE DRIVER		GULL WING	80	HQFP	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				FLATPACK, HEAT SINK/SLUG													QUAD	R-PQFP-G80								ALSO OPERATE 3.3 VOLT SUPPLY
NE5181N	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		EIA-232-C; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	100 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T28		5.08 mm	15.24 mm	Not Qualified		TRUE	8						36.51 mm		100 ns
935024380602	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified			3		NO		NOT SPECIFIED	NOT SPECIFIED	10.3 mm		425 ns
TDA9982B/15	NXP Semiconductors	LINE DRIVER		GULL WING	80	HQFP	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				FLATPACK, HEAT SINK/SLUG													QUAD	R-PQFP-G80								ALSO OPERATE 3.3 VOLT SUPPLY
74AUP1G3208	NXP Semiconductors	LINE DRIVER
74AUP1G04	NXP Semiconductors	LINE DRIVER
935269825115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER		3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES		NOT SPECIFIED	NOT SPECIFIED	3 mm		15 ns
74AUP2G132	NXP Semiconductors	LINE DRIVER
PTN3342DH	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified			4			e4		260	5 mm		6 ns
74AUP1GU04	NXP Semiconductors	LINE DRIVER
PDIUSBP11PWDH-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		300 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G14		1.1 mm	4.4 mm	Not Qualified			1		YES				5 mm		20 ns
74AUP2G79	NXP Semiconductors	LINE DRIVER
TDA9979C	NXP Semiconductors	LINE RECEIVER		GULL WING	144	QFP	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				FLATPACK													QUAD	R-PQFP-G144								ALSO OPERATE 3.3 VOLT SUPPLY
935275802112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		.3 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.3 V	.65 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.1 mm	4.4 mm				2		NO				5 mm		.3 ns
PTN3341D,112	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified					YES	e4			9.9 mm	.25 V	0 ns
7802301EA	NXP Semiconductors	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1		15 ns	EIA-422; FED STD 1020		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm						YES				19.43 mm
NTS0102GU8,125	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V	1.8/3.3,2.5/5		CHIP CARRIER, VERY THIN PROFILE	LCC8,.05X.06,16	2.3 V	Other Interface ICs		1.65 V	.4 mm	125 Cel	2.5 V		-40 Cel	2		QUAD	R-PQCC-N8	1	.5 mm	1.2 mm	Not Qualified			2		NO		30	260	1.4 mm		8.8 ns
PDI1284P11DGG,118	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm				13	6 ADDITIONAL BUFFER/DRIVER	NO	e4	30	260	12.5 mm		20 ns
PTN3331D-T	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified					YES	e4			9.9 mm
10216N	NXP Semiconductors		OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			ECL10K			27 mA				-5.2	-5.2 V	IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	85 Cel			-30 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16				Not Qualified						e0
935271407118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		DIFFERENTIAL		5.5 V			CHIP CARRIER, HEAT SINK/SLUG		4 V			1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS WITH HYSTERESIS AND ONE DIFFERENTIAL RECEIVER	YES		40	260	3 mm		15 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.