NXP Semiconductors Line Drivers & Receivers 610

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
PDI1284P11DL,112	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V		0 Cel	14	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	2.8 mm	7.5 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER LINES PERIPHERAL AND 5 ADDITIONAL CONTROL LINES FROM CABLE	NO	e4	30	260	15.875 mm		20 ns
935269824118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER		3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			1.65 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES	e4			5 mm		15 ns
74AUP2G14	NXP Semiconductors	LINE DRIVER
PTN3341D	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified					YES	e4			9.9 mm	.25 V	0 ns
PTN3331DH,118	NXP Semiconductors		INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES				2.5 ns				3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00002 Amp		.635 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16				Not Qualified					YES					.247 V
935271104118	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified					YES	e4			9.9 mm
935271101118	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified					YES	e4			9.9 mm
S8T28F	NXP Semiconductors	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	1	BIPOLAR	17 ns	GENERAL PURPOSE	110 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	4		NO				19.431 mm		17 ns
PDIUSBP11APW	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	300 ns	GENERAL PURPOSE	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.1 mm	4.4 mm	Not Qualified			1		YES				5 mm		18 ns
PTN3332D,112	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e4			9.9 mm		6 ns
PTN3332D	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e4			9.9 mm		6 ns
PTN36221AHX	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1		.5 ns	GENERAL PURPOSE		DIFFERENTIAL	1.8 V				CHIP CARRIER, VERY THIN PROFILE	LCC12,.06SQ,16			.000045 Amp	1.71 V	.4 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		QUAD	S-PQCC-N12		.4 mm	1.6 mm			COMPLEMENTARY	1		YES				1.6 mm	.8 V	.5 ns
NE5170D	NXP Semiconductors	LINE DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13 V	1	BIPOLAR		EIA-232-C; V.10; X.26; EIA-423-A	35 mA	STANDARD	10 V	-13 V			SMALL OUTLINE		-9 V			9 V	1.27 mm	70 Cel	-10 V	3-STATE	0 Cel	8		DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified		INVERTED			NO				15.4 mm		0 ns
74AUP2G241	NXP Semiconductors	LINE DRIVER
PDIUSBP11ADB	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	300 ns	GENERAL PURPOSE	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified			1		YES				6.2 mm		18 ns
74AUP1Z04	NXP Semiconductors	LINE DRIVER
PDIUSBP11APW-T	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.1 mm	4.4 mm	Not Qualified			1		YES				5 mm		18 ns
935275883118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.7 V	10	CMOS	150 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.3 V	.65 mm	85 Cel			-40 Cel	10		DUAL	R-PDSO-G16		1.1 mm	4.4 mm				10	SUPPLY VOLTAGE 3.3 V ALSO POSSIBLE	NO				5 mm		150 ns
TDA9983B/8	NXP Semiconductors	LINE DRIVER		GULL WING	80	HQFP	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				FLATPACK, HEAT SINK/SLUG													QUAD	R-PQFP-G80								ALSO OPERATE 3.3 VOLT SUPPLY
74AUP1G885	NXP Semiconductors	LINE DRIVER
PTN3331D	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e4			9.9 mm	.247 V	0 ns
74AUP1T57	NXP Semiconductors	LINE DRIVER
TDA9975A	NXP Semiconductors	LINE RECEIVER		BALL	256	BGA	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				GRID ARRAY													BOTTOM	R-PBGA-B256								ALSO OPERATE 3.3 VOLT SUPPLY
NE5170N	NXP Semiconductors	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	13 V	1	BIPOLAR		EIA-232-C; V.10; X.26; EIA-423-A	35 mA	STANDARD	12 V			-12 V	IN-LINE					9 V	2.54 mm	70 Cel		3-STATE	0 Cel	8		DUAL	R-PDIP-T20		4.2 mm	7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO				26.73 mm
PTN3331D,112	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e4			9.9 mm	.247 V	0 ns
NTS0102GU8	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V			CHIP CARRIER, VERY THIN PROFILE		2.3 V			1.65 V	.4 mm	125 Cel	2.5 V		-40 Cel	2		QUAD	R-PQCC-N8	1	.5 mm	1.2 mm				2		NO				1.4 mm		8.8 ns
PDI1284P11DGG,698	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm				13	6 ADDITIONAL BUFFER/DRIVER	NO	e4	30	260	12.5 mm		20 ns
74AUP2G07	NXP Semiconductors	LINE DRIVER
74AUP1G11	NXP Semiconductors	LINE DRIVER
PTN3342DH,118	NXP Semiconductors		INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS			18 mA		3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16				Not Qualified											6 ns
TDA9979A	NXP Semiconductors	LINE RECEIVER		GULL WING	144	QFP	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				FLATPACK													QUAD	R-PQFP-G144								ALSO OPERATE 3.3 VOLT SUPPLY
TDA9970A	NXP Semiconductors	LINE RECEIVER		BALL	256	BGA	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				GRID ARRAY													BOTTOM	R-PBGA-B256								ALSO OPERATE 3.3 VOLT SUPPLY
TDA9982B/8	NXP Semiconductors	LINE DRIVER		GULL WING	80	HQFP	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				FLATPACK, HEAT SINK/SLUG													QUAD	R-PQFP-G80								ALSO OPERATE 3.3 VOLT SUPPLY
935271105112	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified					YES	e4			5 mm
74AUP2G00	NXP Semiconductors	LINE DRIVER
TDA9982A/8	NXP Semiconductors	LINE DRIVER		GULL WING	80	HQFP	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				FLATPACK, HEAT SINK/SLUG													QUAD	R-PQFP-G80								ALSO OPERATE 3.3 VOLT SUPPLY
935269117115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER		3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm		15 ns
PTN3332DH	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified	8 Amp		4			e4		260	5 mm		6 ns
PTN3332D,118	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	8 Amp		4						9.9 mm		6 ns
PTN3341D,118	NXP Semiconductors		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				2.9 ns				3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16				Not Qualified					YES					.25 V
74AUP1G332	NXP Semiconductors	LINE DRIVER
74AUP2G17	NXP Semiconductors	LINE DRIVER
935223080112	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER	NO	e4			12.5 mm		20 ns
74AUP1G157	NXP Semiconductors	LINE DRIVER
TDA9983B/15	NXP Semiconductors	LINE DRIVER		GULL WING	80	HQFP	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				FLATPACK, HEAT SINK/SLUG													QUAD	R-PQFP-G80								ALSO OPERATE 3.3 VOLT SUPPLY
74AUP1G80	NXP Semiconductors	LINE DRIVER
74LVC1284PW,118	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			4		NO	e4			6.5 mm		9 ns
PDI1284P11DGG,512	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			13	6 ADDITIONAL BUFFER/DRIVER	NO	e4	30	260	12.5 mm		20 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.