NXP Semiconductors Line Drivers & Receivers 610

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ISP1109BS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	1.8/3.3,3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified	2 Amp		1	TWO SINGLE ENDED RECEIVERS	YES	e3/e4			5 mm	3.3 V	15 ns
AM26LS33MF	NXP Semiconductors	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR		GENERAL PURPOSE	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED	4						19.535 mm		25 ns
AM26LS32BID	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	BIPOLAR		V.10; V.11; EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		26 ns
NTB0102GU	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	10	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		17.2 ns	GENERAL PURPOSE			1.5 V				CHIP CARRIER, VERY THIN PROFILE					1.2 V	.4 mm	125 Cel			-40 Cel	2		QUAD	R-PQCC-N10	1	.5 mm	1.4 mm	Not Qualified			2	IT ALSO OPERATE AT 1.65 TO 5.5 V	NO				1.8 mm		17.2 ns
ISP1508BET	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	TFBGA	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.6 V				GRID ARRAY, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B36		1.15 mm	3.5 mm	Not Qualified			1		NO		NOT SPECIFIED	NOT SPECIFIED	3.5 mm		17 ns
NTB0102GU,115	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	10	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		17.2 ns	GENERAL PURPOSE			1.5 V		1.2/3.6,1.8/5		CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16		Other Interface ICs		1.2 V	.4 mm	125 Cel			-40 Cel	2	MATTE TIN	QUAD	R-PQCC-N10	1	.5 mm	1.4 mm	Not Qualified			2	IT ALSO OPERATE AT 1.65 TO 5.5 V	NO	e3		260	1.8 mm		17.2 ns
ISP1106DH	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	3.3,5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	1.65 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	2 Amp		3	TWO SINGLE ENDED RECEIVERS	YES	e4		260	5 mm	2.5 V	15 ns
ISP1104W	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	VBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,30/20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		BOTTOM	S-PBCC-B16	1	.8 mm	3 mm	Not Qualified	2 Amp		3	TWO SINGLE ENDED RECEIVERS WITH HYSTERESIS AND ONE DIFFERENTIAL RECEIVER	YES		40	260	3 mm		15 ns
ISP1504CBS,151	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1		YES	e3/e4			5 mm		17 ns
AM26LS33MN	NXP Semiconductors	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		TRUE	4						19.025 mm		25 ns
ISP1102W-G	NXP Semiconductors		INDUSTRIAL	NO LEAD	16	QCCN	SQUARE	PLASTIC/EPOXY	YES						8 mA				1.8/3.3,5		CHIP CARRIER	LCC16,.12SQ,30/20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16				Not Qualified	2 Amp				YES					2.5 V	15 ns
NTB0102DP	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		17.2 ns	GENERAL PURPOSE			1.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					1.2 V	.65 mm	125 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			2	IT ALSO OPERATE AT 1.65 TO 5.5 V	NO	e4			3 mm		17.2 ns
AM26LS30CA	NXP Semiconductors	LINE DRIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4	TTL	200 ns	EIA-422		STANDARD	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel			0 Cel	4		QUAD	S-PQCC-J20		4.57 mm	8.9662 mm	Not Qualified					YES				8.9662 mm
ISP1508AET	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	TFBGA	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.6 V				GRID ARRAY, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B36		1.15 mm	3.5 mm	Not Qualified			1		NO		NOT SPECIFIED	NOT SPECIFIED	3.5 mm		17 ns
ISP1506A	NXP Semiconductors
NTB0101GV	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.65 V			1.2 V	.95 mm	125 Cel	1.8 V		-40 Cel	1		DUAL	R-PDSO-G6		1.1 mm	1.5 mm	Not Qualified			1		NO				2.9 mm		14.2 ns
ISP1107XX	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HVBCC	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		15 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			4 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	IT CONTAINS TWO SINGLE ENDED RECEIVER AND ONE DIFFERENTIAL RECEIVER	YES				3 mm		15 ns
MC145406N	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28	.6 mA	SCHMITT TRIGGER	5 V	13.2 V	5,+-5/+-12	-12 V	IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified	4 Amp	INVERTED	3		NO	e4			19.025 mm		425 ns
AM26LS31MF	NXP Semiconductors	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	20 ns	EIA-422; FED STD 1020	80 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.535 mm
AM26LS30MN	NXP Semiconductors	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR	200 ns	EIA-422; EIA-423	30 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-PDIP-T16		4.06 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.09 mm
ISP1702A	NXP Semiconductors
NTB0101GS	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V			SMALL OUTLINE, VERY THIN PROFILE		1.65 V			1.2 V	.35 mm	125 Cel	1.8 V		-40 Cel	1	TIN	DUAL	S-PDSO-N6	1	.35 mm	1 mm	Not Qualified			1		NO	e3			1 mm		14.2 ns
NTB0101GS,132	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V	1.2/3.6,1.8/5		SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	1.65 V	Other Interface ICs		1.2 V	.35 mm	125 Cel	1.8 V		-40 Cel	1	TIN	DUAL	S-PDSO-N6	1	.35 mm	1 mm	Not Qualified			1		NO	e3	30	260	1 mm		14.2 ns
PCA9518D-T	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	389 ns	I2C			3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	5	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20		2.65 mm	7.5 mm				5		NO	e4			12.8 mm		389 ns
ISP1102W,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE	8 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,30/20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified	2 Amp		1		YES				3 mm	2.5 V	15 ns
ISP1512AUK,023	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BALL	25	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	4.5 V	1		614 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.6 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH					3 V	.4 mm	85 Cel			-40 Cel	1		BOTTOM	R-PBGA-B25		.6 mm	2.21 mm	Not Qualified			1		NO				2.24 mm		20 ns
PCA9508DP-T	NXP Semiconductors		INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS							3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8				Not Qualified
ISP1506BBS,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		NO	e3/e4			4 mm		17 ns
AM26LS32ID-T	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		25 ns
AM26LS31ID	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	20 ns	EIA-422; FED STD 1020		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES				9.9 mm
NTB0102GF	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		17.2 ns	GENERAL PURPOSE			1.5 V				SMALL OUTLINE, VERY THIN PROFILE					1.2 V	.35 mm	125 Cel			-40 Cel	2	TIN	DUAL	R-PDSO-N8	1	.5 mm	1 mm	Not Qualified			2	IT ALSO OPERATE AT 1.65 TO 5.5 V	NO	e3	30	260	1.35 mm		17.2 ns
ISP1703A	NXP Semiconductors
MC145406D,518	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V	5,+-5/+-12	-12 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	4 Amp	INVERTED	3		NO	e4			10.3 mm	7.5 V	425 ns
MC145406D,129	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm				3		NO				10.3 mm		425 ns
MC145405SD	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	1000 ns	EIA-232-E; V.28		SCHMITT TRIGGER	5 V	26.4 V			SMALL OUTLINE, SHRINK PITCH		9 V			4.5 V	.65 mm	85 Cel	24 V		-40 Cel	5		DUAL	R-PDSO-G20		1.99 mm	5.29 mm	Not Qualified			3		NO				7.2 mm		610 ns
ISP1508	NXP Semiconductors
TJA1082TT	NXP Semiconductors	LINE TRANSCEIVER		GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			GENERAL PURPOSE		STANDARD	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm					1	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified			1		NO	e4			5 mm		0 ns
MC1489AF	NXP Semiconductors	LINE RECEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.005 V	4	BIPOLAR		EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.995 V	2.54 mm	75 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	1						19.535 mm		85 ns
ISP1103DB	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		145 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified			1		YES				6.2 mm		10 ns
MC145407DW	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	1000 ns	EIA-232-E; V.28	3 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE	SOP20,.4			.000001 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	3		DUAL	R-PDSO-G20		2.65 mm	7.5 mm		1.6 Amp	INVERTED	3		NO				12.8 mm		1000 ns
NTB0101GF,132	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V	1.2/3.6,1.8/5		SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	1.65 V	Other Interface ICs		1.2 V	.35 mm	125 Cel	1.8 V		-40 Cel	1	TIN	DUAL	S-PDSO-N6	1	.5 mm	1 mm	Not Qualified			1		NO	e3	30	260	1 mm		14.2 ns
NTB0101GM	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V			SMALL OUTLINE, VERY THIN PROFILE		1.65 V			1.2 V	.5 mm	125 Cel	1.8 V		-40 Cel	1	TIN	DUAL	R-PDSO-N6	1	.5 mm	1 mm	Not Qualified			1		NO	e3			1.45 mm		14.2 ns
ISP1507CBS,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY					4 mm		17 ns
AM26LS33ID	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		25 ns
MC1488D-T	NXP Semiconductors	LINE DRIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4	BIPOLAR	175 ns	EIA-232-C; V.24	34 mA	GATED	9 V	-15 V			SMALL OUTLINE		-8.91 V			8.91 V	1.27 mm	75 Cel	-9 V	TOTEM-POLE	0 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED			NO				8.65 mm		0 ns
ISP1506ABS,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		NO	e3/e4			4 mm		17 ns
AM26LS33CN	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		TRUE	4						19.025 mm		25 ns
ISP1105W,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm		15 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.