NXP Semiconductors Line Drivers & Receivers 610

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ISP1105W,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES		NOT SPECIFIED	NOT SPECIFIED	3 mm		15 ns
AM26LS32BCN	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		V.10; V.11; EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		TRUE	4						19.025 mm		26 ns
5962-7802001M2X	NXP Semiconductors	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V		125 Cel			-55 Cel			QUAD	S-CQCC-N20				Not Qualified			4								38 ns
PCA9515D,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BICMOS	170 ns				3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified						e4	30	260	4.9 mm		170 ns
NTB0101GW	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.65 V			1.2 V	.65 mm	125 Cel	1.8 V		-40 Cel	1	PURE TIN	DUAL	R-PDSO-G6	1	1.1 mm	1.25 mm	Not Qualified			1		NO				2 mm		14.2 ns
ISP1505CBS,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES	e3/e4			4 mm		17 ns
NTB0101GN	NXP Semiconductors	LINE TRANSCEIVER
ISP1505CBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	4 mm		17 ns
ISP1504C1ET	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	TFBGA	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.6 V				GRID ARRAY, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B36		1.15 mm	3.5 mm	Not Qualified			1		NO		NOT SPECIFIED	NOT SPECIFIED	3.5 mm		17 ns
ISP1105W-T	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16	1	.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES				3 mm		15 ns
AM26LS33IN	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		TRUE	4						19.025 mm		25 ns
ISP1102BS-G	NXP Semiconductors		INDUSTRIAL	NO LEAD	14	QCCN	SQUARE	PLASTIC/EPOXY	YES						8 mA				1.8/3.3,5		CHIP CARRIER	LCC14,.1SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N14				Not Qualified	2 Amp				YES					2.5 V	15 ns
AM26LS30ID-T	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	200 ns	EIA-422; EIA-423		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES				9.9 mm
ISP1504CBS,157	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1		YES	e3/e4			5 mm		17 ns
ISP1505C	NXP Semiconductors
ISP1302UK,023	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BALL	25	VFBGA	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH		1.4 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBGA-B25		.64 mm	2.45 mm	Not Qualified			1		YES				2.45 mm		15 ns
AM26LS30CN	NXP Semiconductors	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR	200 ns	EIA-422; EIA-423		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		4.06 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.09 mm
ISP1504C1	NXP Semiconductors
ISP1105W-G	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm		15 ns
AM26LS31IN	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR	20 ns	EIA-422; FED STD 1020		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.025 mm
ISP1102BS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N14	1	1 mm	2.5 mm	Not Qualified			1		YES	e4	40	260	2.5 mm	1.3 V	15 ns
ISP1506BBS,551	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		NO	e3/e4			4 mm		17 ns
ISP1504A	NXP Semiconductors
ISP1301BS,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES				4 mm		15 ns
ISP1105BS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	3 V	Line Driver or Receivers	.000001 Amp	1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N16	1	1 mm	3 mm	Not Qualified	2 Amp		3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm	2.5 V	15 ns
AM26LS30ID	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	200 ns	EIA-422; EIA-423		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES				9.9 mm
ISP1505ABS,557	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES	e3/e4			4 mm		17 ns
ISP1512AUK	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BALL	25	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	4.5 V	1		614 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.6 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH					3 V	.4 mm	85 Cel			-40 Cel	1		BOTTOM	R-PBGA-B25		.6 mm	2.21 mm	Not Qualified			1		NO				2.24 mm		20 ns
NTB0101GV,125	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V	1.2/3.6,1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	1.65 V	Other Interface ICs		1.2 V	.95 mm	125 Cel	1.8 V		-40 Cel	1		DUAL	R-PDSO-G6		1.1 mm	1.5 mm	Not Qualified			1		NO				2.9 mm		14.2 ns
ISP1507CBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY					4 mm		17 ns
ISP1505ABS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES	e3/e4			4 mm		17 ns
AM26LS32CD-T	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		25 ns
ISP1102BS,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE	8 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N14		1 mm	2.5 mm	Not Qualified	2 Amp		1		YES	e4			2.5 mm	2.5 V	15 ns
ISP1109BS,151	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1	TWO SINGLE ENDED RECEIVERS	YES	e3/e4			5 mm		15 ns
PCA9518D	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	389 ns	I2C			3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	5	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e4	30	260	12.8 mm		389 ns
ISP1302HN,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES				4 mm		15 ns
MC145583DW	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS		EIA-232-E; V.28; EIA-562	6 mA	SCHMITT TRIGGER	5 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers	.000001 Amp		1.27 mm	85 Cel		3-STATE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP	NO	e0			17.9 mm	10 V	1000 ns
NTB0101GF	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V			SMALL OUTLINE, VERY THIN PROFILE		1.65 V			1.2 V	.35 mm	125 Cel	1.8 V		-40 Cel	1	TIN	DUAL	S-PDSO-N6	1	.5 mm	1 mm	Not Qualified			1		NO	e3			1 mm		14.2 ns
ISP1506BBS,557	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		NO	e3/e4	NOT SPECIFIED	NOT SPECIFIED	4 mm		17 ns
TDA8579	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	18 V	2	BIPOLAR		GENERAL PURPOSE	14 mA	DIFFERENTIAL	8.5 V		8.5		IN-LINE	DIP8,.3		Line Driver or Receivers		5 V	2.54 mm	85 Cel			-40 Cel			DUAL	R-PDIP-T8		4.2 mm	7.62 mm	Not Qualified			2						9.5 mm		0 ns
P82B96TD/S900	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	BIPOLAR		GENERAL PURPOSE	4 mA	STANDARD	5 V		2/15		SMALL OUTLINE	SOP8,.25		Other Interface ICs		2 V	1.27 mm	125 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			2		NO	e4	30	260	4.9 mm		0 ns
ISP1106DH,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	3.3,5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	1.65 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	2 Amp		3	TWO SINGLE ENDED RECEIVERS	YES	e4		260	5 mm	2.5 V	15 ns
ISP1504A1ET	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	TFBGA	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.6 V				GRID ARRAY, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B36		1.15 mm	3.5 mm	Not Qualified			1		NO				3.5 mm		17 ns
AM26LS32BMN	NXP Semiconductors	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR		V.10; V.11; EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		TRUE	4						19.025 mm		26 ns
AM26LS33CD	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		25 ns
MC145406D,623	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm				3		NO				10.3 mm		425 ns
ISP1109BS,157	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	1.8/3.3,3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified	2 Amp		1	TWO SINGLE ENDED RECEIVERS	YES	e3/e4			5 mm	3.3 V	15 ns
ISP1506BBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		11 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		NO	e3/e4	NOT SPECIFIED	NOT SPECIFIED	4 mm		17 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.