NXP Semiconductors Line Drivers & Receivers 610

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC145406D-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V	5,+-5/+-12	-12 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified	4 Amp	INVERTED	3		NO	e4			10.3 mm	7.5 V	425 ns
MC145406D-S	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified		INVERTED	3		NO		40	250	10.3 mm		425 ns
TDA8579T/N1,118	NXP Semiconductors	LINE RECEIVER		GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1				GENERAL PURPOSE		DIFFERENTIAL	8.5 V				SMALL OUTLINE					5 V	1.27 mm						NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			2			e4			4.9 mm		0 ns
ISP1504CBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1		YES	e3/e4			5 mm		17 ns
ISP1106DH,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			1.65 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES	e4	40	260	5 mm		15 ns
MC145406D/G,518	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm				3		NO				10.3 mm		425 ns
MC1488F	NXP Semiconductors	LINE DRIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	15 V	4	BIPOLAR		175 ns	EIA-232-C; V.24	34 mA	GATED	9 V	-15 V			IN-LINE		-8.91 V			8.91 V	2.54 mm	75 Cel	-9 V	TOTEM-POLE	0 Cel	1		DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED			NO				19.535 mm		0 ns
ISP1302HN,557	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES				4 mm		15 ns
ISP1301BS,151	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES				4 mm		15 ns
ISP1110VH	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		18 ns	GENERAL PURPOSE	8 mA	DIFFERENTIAL	5 V	4.5 V	1.8,2.8,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LGA16,5X5,30/20	2.7 V	Line Driver or Receivers		4 V	.5 mm	85 Cel	2.8 V		-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified	2 Amp		1	ALSO REQUIRES 1.65V TO 2.85V SUPPLY	YES				3 mm		15 ns
5962-7802001MFA	NXP Semiconductors	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4		MIL-STD-883		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				FLATPACK					4.5 V		125 Cel			-55 Cel		TIN LEAD	DUAL	R-GDFP-F16				Not Qualified			4			e0					38 ns
NTB0102DP-Q100	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100	17.2 ns	GENERAL PURPOSE			1.5 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16	1.65 V			1.2 V	.65 mm	125 Cel	1.8 V		-40 Cel	2		DUAL	S-PDSO-G8	1	1.1 mm	3 mm				2		NO				3 mm		17.2 ns
PCA9542AD,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			.3 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE					2.3 V	1.27 mm	85 Cel			-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			2		NO	e4	30	260	8.65 mm		.3 ns
TDA8579T	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	2	BIPOLAR			GENERAL PURPOSE	14 mA	DIFFERENTIAL	8.5 V		8.5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1			e4			4.9 mm		0 ns
PCA9518D,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		389 ns	I2C			3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e4	30	260	12.8 mm		389 ns
ISP1504ABS,151	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1		YES	e3/e4			5 mm		17 ns
ISP1301BS,157	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24	1	1 mm	4 mm	Not Qualified			1		YES			260	4 mm		15 ns
ISP1504ABS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1		YES	e3/e4	NOT SPECIFIED	NOT SPECIFIED	5 mm		17 ns
ISP1102BS-T	NXP Semiconductors		INDUSTRIAL	NO LEAD	14	QCCN	SQUARE	PLASTIC/EPOXY	YES							8 mA				1.8/3.3,5		CHIP CARRIER	LCC14,.1SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N14				Not Qualified	2 Amp				YES					2.5 V	15 ns
MC145406N,129	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	CMOS		500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	IN-LINE		4.5 V			4.5 V	2.54 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDIP-T16		4.2 mm	7.62 mm				3		NO				19.025 mm		425 ns
PCA9542AD	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			.3 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE					2.3 V	1.27 mm	85 Cel			-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			2		NO	e4	30	260	8.65 mm		.3 ns
ISP1103DH	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			145 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.1 mm	4.4 mm	Not Qualified			1		YES				5 mm		10 ns
ISP1505CBS,551	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES	e3/e4			4 mm		17 ns
NTB0101GS1	NXP Semiconductors	LINE TRANSCEIVER
MC145406SDR2	NXP Semiconductors		INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES							.6 mA				5,+-5/+-12		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers	.000001 Amp		.635 mm	85 Cel			-40 Cel	3		DUAL	R-PDSO-G16				Not Qualified	4 Amp				NO						425 ns
NTB0102GD-Q100	NXP Semiconductors	LINE TRANSCEIVER											AEC-Q100																								1
PCA9518D,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		389 ns	I2C			3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			1			e4	30	260	12.8 mm		389 ns
ISP1504A1	NXP Semiconductors
TDA8579T/N1SJ	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	2				GENERAL PURPOSE		DIFFERENTIAL	8.5 V				SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm				1			e4	30	260	4.9 mm
NTB0102GT	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			17.2 ns	GENERAL PURPOSE			1.5 V				SMALL OUTLINE, VERY THIN PROFILE					1.2 V	.5 mm	125 Cel			-40 Cel	2	TIN	DUAL	R-PDSO-N8	1	.5 mm	1 mm	Not Qualified			2	IT ALSO OPERATE AT 1.65 TO 5.5 V	NO	e3	30	260	1.95 mm		17.2 ns
AM26LS32ID	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		25 ns
ISP1102AW,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4 V			1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified			1		YES				3 mm		15 ns
ISP1507DBS,518	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY					4 mm		17 ns
ISP1507FBS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1	IT ALSO NEED 1.65 TO 1.95 I/O SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4 mm		17 ns
AM26LS30CA-T	NXP Semiconductors	LINE DRIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4	TTL		200 ns	EIA-422		STANDARD	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel			0 Cel	4		QUAD	S-PQCC-J20		4.57 mm	8.9662 mm	Not Qualified					YES				8.9662 mm
AM26LS30MF	NXP Semiconductors	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR		200 ns	EIA-422; EIA-423	30 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.535 mm
ISP1110VH,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V	4.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			4 V	.5 mm	85 Cel	2.8 V		-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified			1	ALSO REQUIRES 1.65V TO 2.85V SUPPLY	YES				3 mm		15 ns
NTB0102GD,125	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			17.2 ns	GENERAL PURPOSE			1.5 V		1.2/3.6,1.8/5		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.12,20		Other Interface ICs		1.2 V	.5 mm	125 Cel			-40 Cel	2		DUAL	R-PDSO-N8	1	.5 mm	2 mm	Not Qualified			2	IT ALSO OPERATE AT 1.65 TO 5.5 V	NO		30	260	3 mm		17.2 ns
ISP1501BE	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			15 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQFP-G48		1.6 mm	7 mm	Not Qualified			1		YES				7 mm	3.05 V	15 ns
ISP1506C	NXP Semiconductors
MC145406D	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V	5,+-5/+-12	-12 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	4 Amp	INVERTED	3		NO	e4			10.3 mm	7.5 V	425 ns
ISP1106W,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16	NOT APPLICABLE	.8 mm	3 mm	Not Qualified			3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm		15 ns
PCA9515D,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BICMOS		170 ns				3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified						e4	30	260	4.9 mm		170 ns
MC145406D,512	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V	5,+-5/+-12	-12 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	4 Amp	INVERTED	3		NO	e4			10.3 mm	7.5 V	425 ns
ISP1507BBS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified			1						5 mm		17 ns
AM26LS32IN	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		TRUE	4						19.025 mm		25 ns
PCA9516AD	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.7 V	10	CMOS		150 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE					2.3 V	1.27 mm	85 Cel			-40 Cel	10	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			10	SUPPLY VOLTAGE 3.3 V ALSO POSSIBLE	NO	e4	30	260	9.9 mm		150 ns
ISP1102W,115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE	8 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,30/20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		QUAD	S-PQCC-N16		.8 mm	3 mm	Not Qualified	2 Amp		1		YES				3 mm	2.5 V	15 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.