NXP Semiconductors Line Drivers & Receivers 610

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Maximum Receive Delay
PTN3342DH,112	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified		4			e4		260	5 mm	6 ns
PTN3331PW	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2.5 ns	EIA-644; TIA-644			3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified				YES	e4			5 mm
NTS0102GU	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	10	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V			CHIP CARRIER, VERY THIN PROFILE		2.3 V		1.65 V	.4 mm	125 Cel	2.5 V		-40 Cel	2		QUAD	R-PQCC-N10		.5 mm	1.4 mm	Not Qualified		2		NO				1.8 mm	8.8 ns
935271104112	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE				3 V	1.27 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified				YES	e4			9.9 mm
PDIUSBP11PW	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G14		1.1 mm	4.4 mm	Not Qualified		1		YES				5 mm	20 ns
74AUP1G386	NXP Semiconductors	LINE DRIVER
74AUP1G158	NXP Semiconductors	LINE DRIVER
TDA9973C	NXP Semiconductors	LINE RECEIVER		GULL WING	144	QFP	RECTANGULAR	PLASTIC/EPOXY	YES									1.8 V				FLATPACK												QUAD	R-PQFP-G144							ALSO OPERATE 3.3 VOLT SUPPLY
74AUP2G06	NXP Semiconductors	LINE DRIVER
74AUP2G86	NXP Semiconductors	LINE DRIVER
74AUP2G0604	NXP Semiconductors	LINE DRIVER
74LVC1284DB,118	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH				3 V	.65 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified		4		NO	e4			7.2 mm	9 ns
74HCT1284N	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		31 ns	IEEE 1284		SCHMITT TRIGGER	5 V				IN-LINE				4.7 V	2.54 mm	70 Cel			0 Cel	7	TIN/NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T20		4.2 mm	7.62 mm	Not Qualified		4		NO	e3/e4			26.73 mm	10 ns
74AUP1G0832	NXP Semiconductors	LINE DRIVER
74AUP2G32	NXP Semiconductors	LINE DRIVER
935293619125	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			14.2 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.5 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.65 V		1.2 V	.95 mm	125 Cel	1.8 V		-40 Cel	1		DUAL	R-PDSO-G6		1.1 mm	1.5 mm			1		NO				2.9 mm	14.2 ns
935024370602	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	CMOS		500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	IN-LINE		4.5 V		4.5 V	2.54 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified		3		NO		NOT SPECIFIED	NOT SPECIFIED	19.025 mm	425 ns
935223090112	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V		3 V	.635 mm	70 Cel	5 V		0 Cel	14		DUAL	R-PDSO-G48		2.8 mm	7.5 mm	Not Qualified		13	6 ADDITIONAL BUFFER/DRIVER LINES PERIPHERAL AND 5 ADDITIONAL CONTROL LINES FROM CABLE	NO		NOT SPECIFIED	NOT SPECIFIED	15.875 mm	20 ns
NE5180A-T	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR			EIA-232-C; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	100 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER				4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified	TRUE	8						11.5062 mm	500 ns
PDIUSBP11AD-T	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE				3 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		1		YES				8.65 mm	18 ns
935223090118	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V		3 V	.635 mm	70 Cel	5 V		0 Cel	14		DUAL	R-PDSO-G48		2.8 mm	7.5 mm	Not Qualified		13	6 ADDITIONAL BUFFER/DRIVER LINES PERIPHERAL AND 5 ADDITIONAL CONTROL LINES FROM CABLE	NO		NOT SPECIFIED	NOT SPECIFIED	15.875 mm	20 ns
PDIUSBP11APWDH-T	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.1 mm	4.4 mm	Not Qualified		1		YES				5 mm	19 ns
935286883115	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	NO LEAD	10	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			6.7 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.65 V				SMALL OUTLINE, VERY THIN PROFILE				1.1 V	.35 mm	85 Cel			-40 Cel	1		DUAL	S-PDSO-N10		.5 mm	1 mm					NO				1.7 mm
74LVC1284DB-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH				3 V	.65 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified		4		NO	e4			7.2 mm	9 ns
PDI1284P11DL,118	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V		3 V	.635 mm	70 Cel	5 V		0 Cel	14	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	2.8 mm	7.5 mm	Not Qualified		13	6 ADDITIONAL BUFFER/DRIVER LINES PERIPHERAL AND 5 ADDITIONAL CONTROL LINES FROM CABLE	NO	e4	30	260	15.875 mm	20 ns
74AUP1T97	NXP Semiconductors	LINE DRIVER
74AUP1G98	NXP Semiconductors	LINE DRIVER
74AUP1G08	NXP Semiconductors	LINE DRIVER
935271100112	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified				YES	e4			5 mm
NE5180A	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR			EIA-232-C; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	100 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER				4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified	TRUE	8						11.5062 mm	500 ns
TDA9970C	NXP Semiconductors	LINE RECEIVER		BALL	256	BGA	RECTANGULAR	PLASTIC/EPOXY	YES									1.8 V				GRID ARRAY												BOTTOM	R-PBGA-B256							ALSO OPERATE 3.3 VOLT SUPPLY
74HCT1284PW	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		31 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.7 V	.65 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G20		1.1 mm	4.4 mm	Not Qualified		4		NO				6.5 mm	10 ns
74AUP2G157	NXP Semiconductors	LINE DRIVER
74AUP2G02	NXP Semiconductors	LINE DRIVER
935258940112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE				3 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		1		YES		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	18 ns
935269117118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER		3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified		3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm	15 ns
74AUP2G125	NXP Semiconductors	LINE DRIVER
935286883132	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	NO LEAD	10	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			6.7 ns	GENERAL PURPOSE		SCHMITT TRIGGER	1.65 V				SMALL OUTLINE, VERY THIN PROFILE				1.1 V	.35 mm	85 Cel			-40 Cel	1		DUAL	S-PDSO-N10		.5 mm	1 mm					NO				1.7 mm
NTS0102GU,115	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	10	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V	1.8/3.3,2.5/5		CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.07,16	2.3 V	Other Interface ICs	1.65 V	.4 mm	125 Cel	2.5 V		-40 Cel	2	MATTE TIN	QUAD	R-PQCC-N10	1	.5 mm	1.4 mm	Not Qualified		2		NO	e3		260	1.8 mm	8.8 ns
935275882118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.7 V	10	CMOS		150 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE				2.3 V	1.27 mm	85 Cel			-40 Cel	10		DUAL	R-PDSO-G16		1.75 mm	3.9 mm			10	SUPPLY VOLTAGE 3.3 V ALSO POSSIBLE	NO				9.9 mm	150 ns
PTN3342PW	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified		4			e4			5 mm	3 ns
NTBA104GU12,115	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	12	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			17.2 ns				1.5 V		1.2/3.6,1.8/5		CHIP CARRIER, VERY THIN PROFILE	LCC12,.07X.08,16		Other Interface ICs	1.2 V	.4 mm	125 Cel			-40 Cel	4		QUAD	R-PQCC-N12	1	.5 mm	1.7 mm	Not Qualified		4	ALSO OPERATES IN SUPPLY VOLTAGE OF 1.65 TO 5.5 VOLT			30	260	2 mm	17.2 ns
ISP1504ABS	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified		1		YES		NOT SPECIFIED	NOT SPECIFIED	5 mm	17 ns
5962-7802002MEA	NXP Semiconductors	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		MIL-STD-883		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE				4.5 V		125 Cel			-55 Cel		TIN LEAD	DUAL	R-GDIP-T16				Not Qualified		4			e0				38 ns
ISP1106W-T	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V		1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16	NOT APPLICABLE	.8 mm	3 mm	Not Qualified		3	TWO SINGLE ENDED RECEIVERS	YES		40	260	3 mm	15 ns
ISP1504CBS,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			11 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	85 Cel			-40 Cel	1	TIN/NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified		1		YES	e3/e4			5 mm	17 ns
MC1489AD-T	NXP Semiconductors	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.005 V	4	BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE				4.995 V	1.27 mm	75 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified	INVERTED	1						8.65 mm	85 ns
5962-7802001MEX	NXP Semiconductors	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4				GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE				4.5 V		125 Cel			-55 Cel			DUAL	R-GDIP-T16				Not Qualified		4							38 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.