NXP Semiconductors Line Drivers & Receivers 610

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
935280436118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		389 ns	I2C			3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	5		DUAL	R-PDSO-G20		1.1 mm	4.4 mm			5		NO				6.5 mm		389 ns
NTS0102TL	NXP Semiconductors	LINE TRANSCEIVER
935268635118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	BICMOS		170 ns				3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel			DUAL	S-PDSO-G8		1.1 mm	3 mm					NO				3 mm		170 ns
NTS0102GT	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V			SMALL OUTLINE, VERY THIN PROFILE		2.3 V			1.65 V	.5 mm	125 Cel	2.5 V		-40 Cel	2	Tin (Sn)	DUAL	R-PDSO-N8	1	.5 mm	1 mm	Not Qualified		2		NO	e3	30	260	1.95 mm		8.8 ns
935271101112	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified				YES	e4			9.9 mm
74AUP1G32	NXP Semiconductors	LINE DRIVER
74AUP1G240	NXP Semiconductors	LINE DRIVER
NTS0102TL-Q100H	NXP Semiconductors	LINE TRANSCEIVER											AEC-Q100																								1									NOT SPECIFIED	260
935272403112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		389 ns	I2C			3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	5		DUAL	R-PDSO-G20		1.1 mm	4.4 mm			5		NO				6.5 mm		389 ns
74AUP1G57	NXP Semiconductors	LINE DRIVER
74AUP1G18	NXP Semiconductors	LINE DRIVER
PTN36221AHXHP	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	VQCCN	SQUARE	PLASTIC/EPOXY	YES		1											CHIP CARRIER, VERY THIN PROFILE						.4 mm							QUAD	S-PQCC-N12	1	.4 mm	1.6 mm								260	1.6 mm
PDI1284P11DGG,518	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified		13	6 ADDITIONAL BUFFER/DRIVER	NO	e4			12.5 mm		20 ns
935024380518	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm			3		NO				10.3 mm		425 ns
74AUP1G09	NXP Semiconductors	LINE DRIVER
NTBA104GU16	NXP Semiconductors	LINE TRANSCEIVER																																			1
935277715118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	BIPOLAR			GENERAL PURPOSE		STANDARD	5 V				SMALL OUTLINE					2 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.75 mm	3.9 mm			2		NO				4.9 mm
PTN3332DH,118	NXP Semiconductors		INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES							18 mA		3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16				Not Qualified	8 Amp									6 ns
PTN3341DH	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.2 mm	4.4 mm	Not Qualified				YES	e4		260	5 mm	.25 V	0 ns
TDA9977A	NXP Semiconductors	LINE RECEIVER		GULL WING	144	QFP	RECTANGULAR	PLASTIC/EPOXY	YES									1.8 V				FLATPACK													QUAD	R-PQFP-G144							ALSO OPERATE 3.3 VOLT SUPPLY
PTN3342D,112	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		4			e4			9.9 mm		6 ns
PTN36221AHX,128	NXP Semiconductors	LINE TRANSCEIVER		NO LEAD	12	VQCCN	SQUARE	PLASTIC/EPOXY	YES		1											CHIP CARRIER, VERY THIN PROFILE						.4 mm							QUAD	S-PQCC-N12		.4 mm	1.6 mm									1.6 mm
935272403118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		389 ns	I2C			3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	5		DUAL	R-PDSO-G20		1.1 mm	4.4 mm			5		NO				6.5 mm		389 ns
935269823118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER		3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified		3	TWO SINGLE ENDED RECEIVERS	YES		NOT SPECIFIED	NOT SPECIFIED	3 mm		15 ns
74AUP1T58	NXP Semiconductors	LINE DRIVER
74AUP1G06	NXP Semiconductors	LINE DRIVER
74AUP3G0434	NXP Semiconductors	LINE DRIVER
935223080118	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13			20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V		0 Cel	14		DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified		13	6 ADDITIONAL BUFFER/DRIVER	NO		NOT SPECIFIED	NOT SPECIFIED	12.5 mm		20 ns
PTN3342D,118	NXP Semiconductors		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS				18 mA		3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16				Not Qualified										6 ns
TDA9975C	NXP Semiconductors	LINE RECEIVER		BALL	256	BGA	RECTANGULAR	PLASTIC/EPOXY	YES									1.8 V				GRID ARRAY													BOTTOM	R-PBGA-B256							ALSO OPERATE 3.3 VOLT SUPPLY
74HCT1284D-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		31 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.7 V	1.27 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified		4		NO				12.8 mm		10 ns
PTN3331D,118	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified				YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.9 mm
NTBA104GU12	NXP Semiconductors	LINE TRANSCEIVER																																			1
PTN3331DB-T	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified				YES	e4			5 mm
74HCT1284DB-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		31 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.7 V	.65 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified		4		NO				7.2 mm		10 ns
PDI1394P11BD	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3				IEEE 1394		DIFFERENTIAL	3.3 V				FLATPACK, LOW PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	2		QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified		2		YES				10 mm		0 ns
935271105118	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified				YES	e4			5 mm
MC13242C	NXP Semiconductors	LINE TRANSCEIVER
74AUP2G04	NXP Semiconductors	LINE DRIVER
74AUP1G74	NXP Semiconductors	LINE DRIVER
74AUP1G86	NXP Semiconductors	LINE DRIVER
PDIUSBP11D	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		1		YES				8.65 mm		20 ns
935269824112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		SCHMITT TRIGGER		3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			1.65 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified		3	TWO SINGLE ENDED RECEIVERS	YES	e4			5 mm		15 ns
935271407115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	GENERAL PURPOSE		DIFFERENTIAL		5.5 V			CHIP CARRIER, HEAT SINK/SLUG		4 V			1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified		3	TWO SINGLE ENDED RECEIVERS WITH HYSTERESIS AND ONE DIFFERENTIAL RECEIVER	YES		40	260	3 mm		15 ns
PTN3341DH,112	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2.9 ns	EIA-644; TIA-644			3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified				YES	e4			5 mm
74AUP1G374	NXP Semiconductors	LINE DRIVER
74AUP1G17	NXP Semiconductors	LINE DRIVER
935272404118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		389 ns	I2C			3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	5		DUAL	R-PDSO-G20		2.65 mm	7.5 mm			5		NO				12.8 mm		389 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.