NXP Semiconductors Line Drivers & Receivers 610

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
NE5181A	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		EIA-232-C; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	100 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified	TRUE	8						11.5062 mm		100 ns
74LVC1284D-T	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		4		NO	e4			12.8 mm		9 ns
74AUP1T98	NXP Semiconductors	LINE DRIVER
74AUP1G07	NXP Semiconductors	LINE DRIVER
74ABT3205	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL							5.5 V	10	BICMOS		GENERAL PURPOSE			5 V									4.5 V		85 Cel			-40 Cel	1							Not Qualified		1								0 ns
935267286112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER		3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			1.65 V	.65 mm	85 Cel	3.3 V		-40 Cel	1		DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified		3	TWO SINGLE ENDED RECEIVERS	YES		NOT SPECIFIED	NOT SPECIFIED	5 mm		15 ns
935275802118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		.3 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.3 V	.65 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.1 mm	4.4 mm			2		NO				5 mm		.3 ns
935268651112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BICMOS	170 ns				3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm					NO				4.9 mm		170 ns
935258940118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		1		YES		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		18 ns
74AUP1Z125	NXP Semiconductors	LINE DRIVER
74AUP2G38	NXP Semiconductors	LINE DRIVER
PTN3331DH	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.2 mm	4.4 mm	Not Qualified				YES	e4		260	5 mm	.247 V	0 ns
PTN3332PW	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified		4			e4			5 mm		3 ns
PTN3341PW	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.9 ns	EIA-644; TIA-644			3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified				YES	e4			5 mm
74AUP1T34	NXP Semiconductors	LINE DRIVER
S8T26AF	NXP Semiconductors	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	1	BIPOLAR	14 ns	GENERAL PURPOSE	67 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4	TIN LEAD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified	INVERTED	4		NO	e0			19.431 mm		14 ns
935258960112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.1 mm	4.4 mm	Not Qualified		1		YES		NOT SPECIFIED	NOT SPECIFIED	5 mm		18 ns
NTS0102DP	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.3 V			1.65 V	.65 mm	125 Cel	2.5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		2		NO	e4	30	260	3 mm		8.8 ns
74AUP2G126	NXP Semiconductors	LINE DRIVER
PDIUSBP11ADB-T	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		1		YES				6.2 mm		18 ns
74AUP1G02	NXP Semiconductors	LINE DRIVER
7802301FA	NXP Semiconductors	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	1		15 ns	EIA-422; FED STD 1020		STANDARD	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel			-55 Cel	4		DUAL	R-GDFP-F16		2.032 mm	6.604 mm					YES				9.6645 mm
935269823115	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	BUTT	16	HBCC	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER		3.6 V			CHIP CARRIER, HEAT SINK/SLUG		3 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		BOTTOM	S-PBCC-B16		.8 mm	3 mm	Not Qualified		3	TWO SINGLE ENDED RECEIVERS	YES		NOT SPECIFIED	NOT SPECIFIED	3 mm		15 ns
935268651118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BICMOS	170 ns				3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm					NO				4.9 mm		170 ns
935024380129	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified		3		NO		NOT SPECIFIED	NOT SPECIFIED	10.3 mm		425 ns
935271100118	NXP Semiconductors	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified				YES	e4			5 mm
935262295112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	BIPOLAR		GENERAL PURPOSE		STANDARD	5 V				SMALL OUTLINE					2 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		2		NO	e4	30	260	4.9 mm
TDA9973A	NXP Semiconductors	LINE RECEIVER		GULL WING	144	QFP	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				FLATPACK													QUAD	R-PQFP-G144							ALSO OPERATE 3.3 VOLT SUPPLY
74AUP2G3404	NXP Semiconductors	LINE DRIVER
935293675115	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	10	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V			CHIP CARRIER, VERY THIN PROFILE		2.3 V			1.65 V	.4 mm	125 Cel	2.5 V		-40 Cel	2		QUAD	R-PQCC-N10		.5 mm	1.4 mm			2		NO				1.8 mm		8.8 ns
935276494118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	BICMOS	170 ns				3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel			DUAL	S-PDSO-G8		1.1 mm	3 mm					NO				3 mm		170 ns
935258950112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		1		YES		NOT SPECIFIED	NOT SPECIFIED	6.2 mm		18 ns
74AUP3G04	NXP Semiconductors	LINE DRIVER
935075970118	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	2			GENERAL PURPOSE		DIFFERENTIAL	8.5 V				SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm			1		NO				4.9 mm
S8T26F	NXP Semiconductors	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	1	BIPOLAR	20 ns	GENERAL PURPOSE	87 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4	TIN LEAD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified	INVERTED	4		NO	e0			19.431 mm		18 ns
74AUP1G19	NXP Semiconductors	LINE DRIVER
935075970112	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	2			GENERAL PURPOSE		DIFFERENTIAL	8.5 V				SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm			1		NO				4.9 mm
74AUP1G125	NXP Semiconductors	LINE DRIVER
935272404112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	389 ns	I2C			3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	5		DUAL	R-PDSO-G20		2.65 mm	7.5 mm			5		NO				12.8 mm		389 ns
74AUP2GU04	NXP Semiconductors	LINE DRIVER
935267286118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER		3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			1.65 V	.65 mm	85 Cel	3.3 V		-40 Cel	1		DUAL	R-PDSO-G16		1.1 mm	4.4 mm	Not Qualified		3	TWO SINGLE ENDED RECEIVERS	YES		NOT SPECIFIED	NOT SPECIFIED	5 mm		15 ns
TDA9983A/15	NXP Semiconductors	LINE DRIVER		GULL WING	80	HQFP	RECTANGULAR	PLASTIC/EPOXY	YES								1.8 V				FLATPACK, HEAT SINK/SLUG													QUAD	R-PQFP-G80							ALSO OPERATE 3.3 VOLT SUPPLY
74AUP3G3404	NXP Semiconductors	LINE DRIVER
935275801112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		.3 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE					2.3 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm			2		NO				8.65 mm		.3 ns
MC13242CR2	NXP Semiconductors	LINE TRANSCEIVER
NTS0102GD	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V			SMALL OUTLINE, VERY THIN PROFILE		2.3 V			1.65 V	.5 mm	125 Cel	2.5 V		-40 Cel	2		DUAL	R-PDSO-N8	1	.5 mm	2 mm	Not Qualified		2		NO		30	260	3 mm		8.8 ns
935258950118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		300 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		1		YES		NOT SPECIFIED	NOT SPECIFIED	6.2 mm		18 ns
74AUP1G79	NXP Semiconductors	LINE DRIVER

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.