INDUSTRIAL Microprocessors 1,818

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Integrated Cache	Surface Mount	Maximum Supply Voltage	On Chip Data RAM Width	Screening Level	Address Bus Width	Bit Size	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	CPU Family	No. of External Interrupts	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	ROM Words	RAM Words	Width	Data EEPROM Size	Additional Features	Boundary Scan	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	RAM Bytes	Technology	Maximum Supply Current	Nominal Supply Voltage	No. of DMA Channels	No. of Serial I/Os	Sub-Category	Connectivity	ROM Programmability	Terminal Pitch	Format	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Speed	Low Power Mode	JESD-609 Code
ATSAMA5D44A-CU	Microchip Technology	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	361	TFBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.32 V	8	TS 16949	26	32		GRID ARRAY, THIN PROFILE, FINE PITCH	BGA361,19X19,32	1.16 V	85 Cel		1	-40 Cel	TIN SILVER COPPER NICKEL	BOTTOM	1.2 mm		131072	16 mm			YES	32	50 MHz			16 mm		CMOS		1.26 V	32	2				.8 mm	FLOATING POINT	S-PBGA-B361	3		600 rpm	YES	e2
CDP1802ACE	Intersil	MICROPROCESSOR	INDUSTRIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	6.5 V			8	8	5	IN-LINE	DIP40,.6	4 V	85 Cel			-40 Cel	TIN LEAD	DUAL	6.35 mm			15.24 mm			NO	8	3.2 MHz			51.75 mm		CMOS	4 mA	5 V			Microprocessors			2.54 mm	FIXED POINT	R-PDIP-T40		Not Qualified	3.2 rpm	NO	e0
CDP1802AE	Intersil	MICROPROCESSOR	INDUSTRIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	6.5 V			8	8	5/10	IN-LINE	DIP40,.6	4 V	85 Cel			-40 Cel	TIN LEAD	DUAL	6.35 mm			15.24 mm			NO	8	3.2 MHz			51.75 mm		CMOS	4 mA	10 V			Microprocessors			2.54 mm	FIXED POINT	R-PDIP-T40		Not Qualified	3.2 rpm	NO	e0
CDP1802CDX	Intersil	MICROPROCESSOR, RISC	INDUSTRIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	CERAMIC		NO					8	5/10	IN-LINE	DIP40,.6		85 Cel			-40 Cel	Tin/Lead (Sn/Pb)	DUAL														CMOS					Microprocessors			2.54 mm		R-XDIP-T40			2.5 rpm		e0
CT80618003201AB	Intel	MICROPROCESSOR	INDUSTRIAL	BALL	676	FBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.15 V			32	32		GRID ARRAY, FINE PITCH		.75 V	85 Cel			-40 Cel		BOTTOM	2.35 mm			22 mm			NO	32	14.318 MHz	NOT SPECIFIED	NOT SPECIFIED	22 mm		CMOS		1.05 V						.8 mm	FLOATING POINT	S-PBGA-B676			1300 rpm	YES
D6417750RBA240HVU0	Renesas Electronics	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	256	HBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.6 V			26	32		GRID ARRAY, HEAT SINK/SLUG		1.35 V	85 Cel			-40 Cel		BOTTOM	2.6 mm			27 mm			YES	64	34 MHz			27 mm		CMOS		1.5 V						1.27 mm	FLOATING POINT	S-PBGA-B256	3		240 rpm	YES
IS80C88	Intersil	MICROPROCESSOR	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	NO	YES	5.5 V			20	16	5	CHIP CARRIER	LDCC44,.7SQ	4.5 V	85 Cel			-40 Cel	TIN LEAD	QUAD	4.57 mm			16.585 mm			NO	8	5 MHz			16.585 mm		CMOS	50.5 mA	5 V			Microprocessors			1.27 mm	FIXED POINT	S-PQCC-J44		Not Qualified	5 rpm	YES	e0
KU80386EXTC33	Rochester Electronics	MICROPROCESSOR	INDUSTRIAL	GULL WING	132	QFP	SQUARE	PLASTIC/EPOXY	NO	YES	5.5 V			26	32		FLATPACK		4.5 V	117 Cel			-40 Cel		QUAD	4.57 mm			24.13 mm			YES	16	66 MHz			24.13 mm		CMOS		5 V						.635 mm	FIXED POINT	S-PQFP-G132			33 rpm	YES
MC68SEC000CFU10	Motorola	MICROPROCESSOR	INDUSTRIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	NO	YES				24	32		FLATPACK			85 Cel			-40 Cel		QUAD	2.45 mm			14 mm		CAN ALSO OPERATE WITH 5V SUPPLY		16	10 MHz			14 mm		CMOS		3.3 V						.8 mm	FIXED POINT	S-PQFP-G64		Not Qualified	10 rpm	YES
MC8640DTHJ1067NE	NXP Semiconductors	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	1023	HBGA	SQUARE	CERAMIC	YES	YES	1 V			32	32		GRID ARRAY, HEAT SINK/SLUG	BGA1023,32X32,40	.9 V	105 Cel			-40 Cel		BOTTOM	2.97 mm			33 mm			YES	32	166.66 MHz	30	245	33 mm		CMOS		.95 V	4					1 mm	FLOATING POINT	S-CBGA-B1023	3		1067 rpm	NO
MCF52277CVM160	NXP Semiconductors	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	196	LFBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.6 V			24	32	1.5,1.8,2.5,3.3	GRID ARRAY, LOW PROFILE, FINE PITCH	BGA196,14X14,40	1.4 V	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	1.7 mm			15 mm			YES	32	66.67 MHz	40	260	15 mm		CMOS	.7 mA	1.5 V			Microprocessors			.5 mm	FIXED POINT	S-PBGA-B196	3	Not Qualified	166.67 rpm	NO	e1
MCF5232CVM150	NXP Semiconductors	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.6 V			24	32		GRID ARRAY, LOW PROFILE		1.4 V	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	1.6 mm			15 mm		LOW POWER MODE TAKEN FROM LOW POWER MODE	YES	32	75 MHz	40	260	15 mm		CMOS		1.5 V						1 mm	FIXED POINT	S-PBGA-B196	3	Not Qualified	150 rpm	YES	e1
MCF54410CMF250	NXP Semiconductors	MICROPROCESSOR	INDUSTRIAL	BALL	196	BGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.32 V			0			GRID ARRAY		1.14 V	85 Cel			-40 Cel		BOTTOM							YES	0						CMOS		1.2 V							FIXED POINT	S-PBGA-B196			250 rpm	YES
MPC5200CVR400	NXP Semiconductors	MICROPROCESSOR	INDUSTRIAL	BALL	272	HBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.58 V			13			GRID ARRAY, HEAT SINK/SLUG		1.42 V	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	2.65 mm			27 mm			YES	32	35 MHz	40	260	27 mm		CMOS		1.5 V						1.27 mm	FIXED POINT	S-PBGA-B272	3		400 rpm	YES	e1
MPC8309CVMADDCA	NXP Semiconductors	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	489	LFBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.05 V			0	32	1	GRID ARRAY, LOW PROFILE, FINE PITCH	BGA489,23X23,32	.95 V	105 Cel			-40 Cel	TIN SILVER	BOTTOM	1.61 mm			19 mm			YES	0	66.67 MHz	40	260	19 mm		CMOS		1 V			Microprocessors			.8 mm	FLOATING POINT	S-PBGA-B489	3	Not Qualified	266 rpm	YES	e2
MPC8313ECVRADDC	NXP Semiconductors	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	516	HBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.05 V			15	32	1,1.8/2.5,3.3	GRID ARRAY, HEAT SINK/SLUG	BGA516,26X26,40	.95 V	105 Cel			-40 Cel	TIN SILVER	BOTTOM	2.55 mm			27 mm			YES	32		40	260	27 mm		CMOS		1 V			Microprocessors			1 mm	FLOATING POINT	S-PBGA-B516	3	Not Qualified	266 rpm	YES	e2
MPC8313ECVRAGDC	NXP Semiconductors	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	516	HBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.05 V			15	32	1,1.8/2.5,3.3	GRID ARRAY, HEAT SINK/SLUG	BGA516,26X26,40	.95 V	105 Cel			-40 Cel	TIN SILVER	BOTTOM	2.55 mm			27 mm			YES	32		40	260	27 mm		CMOS		1 V			Microprocessors			1 mm	FLOATING POINT	S-PBGA-B516	3	Not Qualified	400 rpm	YES	e2
MPC8343CZQADDB	NXP Semiconductors	MICROPROCESSOR	INDUSTRIAL	BALL	620	BGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.26 V			32	32	1.2,2.5,3.3	GRID ARRAY	BGA620,28X28,40	1.14 V	105 Cel			-40 Cel	TIN LEAD SILVER	BOTTOM	2.46 mm			29 mm		ALSO REQUIRES 2.5V AND 3.3V SUPPLY	YES	32	66 MHz	40	260	29 mm		CMOS		1.2 V			Microprocessors			1 mm	FLOATING POINT	S-PBGA-B620	3	Not Qualified	266 rpm	YES	e0
TDA1MDRCCYEA0	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	684	FBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.26 V			28	32	0.95/1.35	GRID ARRAY, FINE PITCH	BGA684,28X28,32	1.14 V	105 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	3.06 mm		16384	23 mm			YES	16	30 MHz	30	250	23 mm		CMOS		1.2 V			Digital Signal Processors			.8 mm	FLOATING POINT	S-PBGA-B684	4	Not Qualified	720 rpm	YES	e1
CP3BT26Y98ACK/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	144	LFQFP	SQUARE	PLASTIC/EPOXY	NO	YES	2.75 V			23	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	2.25 V	85 Cel	CR16C		-40 Cel	MATTE TIN	QUAD	1.6 mm	262144		20 mm			YES	16		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	S-PQFP-G144	3	Not Qualified	24 rpm	YES	e3
OMAP3530DCBC72	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	515	VFBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.89 V			26	32	1.1,1.2,1.8,1.8/3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA515,26X26,20	1.71 V	85 Cel			-40 Cel		BOTTOM	1 mm			14 mm			YES	16	59 MHz	NOT SPECIFIED	NOT SPECIFIED	14 mm		CMOS		1.8 V			Graphics Processors			.65 mm	FLOATING POINT	S-PBGA-B515		Not Qualified	720 rpm	YES
AMIC120BZDNA30	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	491	LFBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.144 V	8		16	32		GRID ARRAY, LOW PROFILE, FINE PITCH		1.056 V	105 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	1.3 mm	0	524288	17 mm	0	ALSO HAVING 28-BIT ADDRESS AND 16-BIT DATA OF GPMC	YES	32		30	260	17 mm		CMOS	600 mA	1.1 V	64	4		CAN, ETHERNET, I2C, SPI(2), UART, USB		.65 mm	FIXED POINT	S-PBGA-B491	3		300 rpm	YES	e1
OMAP3525ECBBA	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	515	VFBGA	SQUARE	PLASTIC/EPOXY		YES						1.1,1.2,1.8,1.8/3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA515,28X28,16		105 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	.9 mm			12 mm						30	260	12 mm		CMOS					Graphics Processors			.4 mm		S-PBGA-B515	3	Not Qualified	600 rpm		e1
OMAP3525DCBBA	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	515	VFBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.89 V			26	32	1.8,3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA515,28X28,16	1.71 V	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	.9 mm			12 mm			YES	16	59 MHz	30	260	12 mm		CMOS		1.8 V			Graphics Processors			.4 mm	FLOATING POINT	S-PBGA-B515	3	Not Qualified	600 rpm	YES	e1
66AK2E05XABDA25	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	1089	FBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.05 V	8		16			GRID ARRAY, FINE PITCH		.95 V	100 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	3.55 mm		2097152	27 mm			YES	16		30	245	27 mm		CMOS		1 V	5					.8 mm	FLOATING POINT	S-PBGA-B1089	4		1250 rpm	YES	e1
CP3BT26Y98AWMX/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	144	LFQFP	SQUARE	PLASTIC/EPOXY	NO	YES	2.75 V			23	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	2.25 V	85 Cel	CR16C		-40 Cel	MATTE TIN	QUAD	1.6 mm	262144		20 mm			YES	16		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	S-PQFP-G144	3	Not Qualified	24 rpm	YES	e3
TNETV1060GDW	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	324	BGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.575 V			24	32		GRID ARRAY		1.425 V	85 Cel			-40 Cel	TIN LEAD	BOTTOM	2.49 mm			23 mm			YES	32	35 MHz	20	220	23 mm		CMOS		1.5 V						1 mm	FIXED POINT	S-PBGA-B324	4	Not Qualified	165 rpm	YES	e0
OMAP3530DCUS	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	423	LFBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.89 V			26	32	1.1,1.2,1.8,1.8/3	GRID ARRAY, LOW PROFILE, FINE PITCH	BGA423,24X24,25	1.71 V	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	1.4 mm			16 mm			YES	16	59 MHz	30	260	16 mm		CMOS		1.8 V			Graphics Processors			.65 mm	FLOATING POINT	S-PBGA-B423	4	Not Qualified	600 rpm	YES	e1
OMAP3530DCBCA	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	515	VFBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.89 V			26	32	1.1,1.2,1.8,1.8/3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA515,26X26,20	1.71 V	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	1 mm			14 mm			YES	16	59 MHz	30	260	14 mm		CMOS		1.8 V			Graphics Processors			.65 mm	FLOATING POINT	S-PBGA-B515	3	Not Qualified	600 rpm	YES	e1
OMAP3525ECUSA	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	423	LFBGA	SQUARE	PLASTIC/EPOXY		YES						1.1,1.2,1.8,1.8/3	GRID ARRAY, LOW PROFILE, FINE PITCH	BGA423,24X24,25		105 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	1.4 mm			16 mm						30	260	16 mm		CMOS					Graphics Processors			.65 mm		S-PBGA-B423	4	Not Qualified	600 rpm		e1
OMAP3525DCBB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	515	VFBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.89 V			26	32	1.1,1.8,3.3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA515,28X28,16	1.71 V	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	.9 mm			12 mm			YES	16	59 MHz	30	260	12 mm		CMOS		1.8 V			Graphics Processors			.4 mm	FLOATING POINT	S-PBGA-B515	3	Not Qualified	600 rpm	YES	e1
CP3BT10G38	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	NO	YES	2.75 V			22	16		FLATPACK, LOW PROFILE, FINE PITCH		2.25 V	85 Cel			-40 Cel		QUAD	1.6 mm			14 mm			YES	16				14 mm		CMOS		2.5 V						.5 mm	FIXED POINT	S-PQFP-G100			24 rpm	YES
CP3BT23G18AWM/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2.75 V			0	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP128,.63X.87,20	2.25 V	85 Cel	CR16C		-40 Cel		QUAD	1.6 mm	262144		14 mm			YES	0		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	R-PQFP-G128	3	Not Qualified	24 rpm	YES
CP3BT26G18AWMX/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2.75 V			23	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP128,.63X.87,20	2.25 V	85 Cel	CR16C		-40 Cel		QUAD	1.6 mm	262144		14 mm			YES	16		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	R-PQFP-G128	3	Not Qualified	24 rpm	YES
CP3BT10K38X	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	UNSPECIFIED	NO	YES	2.75 V			22	16		CHIP CARRIER		2.25 V	85 Cel			-40 Cel		QUAD	1.1 mm			7 mm			YES	16				7 mm		CMOS		2.5 V						.5 mm	FIXED POINT	S-XQCC-N48			24 rpm	YES
CP3BT26G18ABKX/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2.75 V			23	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP128,.63X.87,20	2.25 V	85 Cel	CR16C		-40 Cel		QUAD	1.6 mm	262144		14 mm			YES	16		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	R-PQFP-G128	3	Not Qualified	24 rpm	YES
CP3BT26Y98AWJ/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	144	LFQFP	SQUARE	PLASTIC/EPOXY	NO	YES	2.75 V			23	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	2.25 V	85 Cel	CR16C		-40 Cel	MATTE TIN	QUAD	1.6 mm	262144		20 mm			YES	16		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	S-PQFP-G144	3	Not Qualified	24 rpm	YES	e3
CP3CN17K38/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	NO LEAD	48	LGA	SQUARE	PLASTIC/EPOXY	YES	YES	2.75 V			0	16	2.5,2.5/3.3	GRID ARRAY	LCC48,.27SQ,20	2.25 V	85 Cel	CR16C		-40 Cel	NICKEL GOLD	BOTTOM		262144					YES	0	12 MHz	30	260		10240	CMOS	15 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	S-PBGA-N48	4	Not Qualified	24 rpm	YES	e4
DM388AAARD11	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	609	LFBGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.42 V	8		28	32		GRID ARRAY, LOW PROFILE, FINE PITCH		1.28 V	95 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	1.32 mm		655360	16 mm			YES	16	30 MHz	30	260	16 mm		CMOS		1.35 V	72					.5 mm	FLOATING POINT	S-PBGA-B609	3		970 rpm	YES	e1
CP3BT26Y98AWU/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	144	LFQFP	SQUARE	PLASTIC/EPOXY	NO	YES	2.75 V			23	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	2.25 V	85 Cel	CR16C		-40 Cel	MATTE TIN	QUAD	1.6 mm	262144		20 mm			YES	16		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	S-PQFP-G144	3	Not Qualified	24 rpm	YES	e3
CP3UB17K38Y	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	UNSPECIFIED	NO	YES	2.75 V			22	16		CHIP CARRIER		2.25 V	85 Cel			-40 Cel		QUAD	1.1 mm			7 mm			YES	16				7 mm		CMOS		2.5 V						.5 mm	FIXED POINT	S-XQCC-N48			24 rpm	YES
CP3BT26Y98AWM/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	144	LFQFP	SQUARE	PLASTIC/EPOXY	NO	YES	2.75 V			23	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	2.25 V	85 Cel	CR16C		-40 Cel	MATTE TIN	QUAD	1.6 mm	262144		20 mm			YES	16		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	S-PQFP-G144	3	Not Qualified	24 rpm	YES	e3
CP3BT26Y98AGK/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	144	LFQFP	SQUARE	PLASTIC/EPOXY	NO	YES	2.75 V			23	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	2.25 V	85 Cel	CR16C		-40 Cel	MATTE TIN	QUAD	1.6 mm	262144		20 mm			YES	16		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	S-PQFP-G144	3	Not Qualified	24 rpm	YES	e3
OMAP3530DZCBBA	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	515	VFBGA	SQUARE	PLASTIC/EPOXY	YES	YES				26		1.1,1.8,3.3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA515,28X28,16		105 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	.9 mm			12 mm			YES	16	59 MHz	30	260	12 mm		CMOS					Graphics Processors			.4 mm	FLOATING POINT	S-PBGA-B515	3	Not Qualified	600 rpm	YES	e1
CP3BT26G18NEP/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2.75 V			23	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP128,.63X.87,20	2.25 V	85 Cel	CR16C		-40 Cel		QUAD	1.6 mm	262144		14 mm			YES	16		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	R-PQFP-G128	3	Not Qualified	24 rpm	YES
AM1707CZKBA3	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	BALL	256	BGA	SQUARE	PLASTIC/EPOXY	YES	YES	1.32 V			13	32	1.2,1.8/3.3	GRID ARRAY	BGA256,16X16,40	1.14 V	105 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM	2.05 mm			17 mm			YES	32	50 MHz	30	260	17 mm		CMOS		1.2 V			Microprocessors			1 mm	FIXED POINT	S-PBGA-B256	3	Not Qualified	375 rpm	YES	e1
CP3CN17G38	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	YES	2.75 V			22	16		FLATPACK, LOW PROFILE, FINE PITCH		2.25 V	85 Cel			-40 Cel		QUAD	1.6 mm			14 mm			YES	16				14 mm		CMOS		2.5 V						.5 mm	FIXED POINT	S-PQFP-G100			24 rpm	YES
CP3BT26Y98AAD/NOPB	Texas Instruments	MICROPROCESSOR, RISC	INDUSTRIAL	GULL WING	144	LFQFP	SQUARE	PLASTIC/EPOXY	NO	YES	2.75 V			23	16	2.5,2.5/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	2.25 V	85 Cel	CR16C		-40 Cel	MATTE TIN	QUAD	1.6 mm	262144		20 mm			YES	16		30	260	20 mm	32768	CMOS	20 mA	2.5 V			Microcontrollers		FLASH	.5 mm	FIXED POINT	S-PQFP-G144	3	Not Qualified	24 rpm	YES	e3

Microprocessors

A microprocessor is a small electronic component that serves as the central processing unit (CPU) of a computer or other electronic device. It is a programmable device that is capable of executing instructions and performing calculations.

Microprocessors are typically made up of millions of transistors and other components, all of which work together to perform complex calculations and operations. They are designed to be highly efficient, with the ability to process vast amounts of data quickly and accurately.

Microprocessors are used in a wide range of electronic devices, including computers, smartphones, tablets, and game consoles. They are also used in industrial control systems, medical devices, and other specialized applications.

One of the key advantages of microprocessors is their flexibility. They can be programmed to perform a wide range of functions and can be easily reprogrammed or updated as needed. This makes them ideal for a wide range of applications, from simple calculators to complex data processing systems.